2. Applications of green, lean manufacturing techniques coupled with value stream mapping can make large financial differences over future years while placing greater emphasis on environmental factors. Engineers with Monarch Paints have recommended to management an investment of $200,000 now in novel methods that will reduce the amount of wastewater, packaging materials, and other solid waste in their consumer paint manufacturing facility. Estimated savings are $15,000 per year for each of the next 10 years and an additional savings of $300,000 at the end of 10 years in facility and equipment upgrade costs. Assume a MARR of 10%. a. Determine the internal rate of return and provide its corresponding Cash Flow Diagram. b. Determine the external rate of return and provide its corresponding Cash Flow Diagram. What can you conclude based on the 2 methods?

2. Applications of green, lean manufacturing techniques coupled with value stream mapping can make large financial differences over future years while placing greater emphasis on environmental factors. Engineers with Monarch Paints have recommended to management an investment of $200,000 now in novel methods that will reduce the amount of wastewater, packaging materials, and other solid waste in their consumer paint manufacturing facility. Estimated savings are $15,000 per year for each of the next 10 years and an additional savings of $300,000 at the end of 10 years in facility and equipment upgrade costs. Assume a MARR of 10%. a. Determine the internal rate of return and provide its corresponding Cash Flow Diagram. b. Determine the external rate of return and provide its corresponding Cash Flow Diagram. What can you conclude based on the 2 methods?

Cornerstones of Cost Management (Cornerstones Series)

4th Edition

ISBN:9781305970663

Author:Don R. Hansen, Maryanne M. Mowen

Publisher:Don R. Hansen, Maryanne M. Mowen

Chapter19: Capital Investment

Section: Chapter Questions

Problem 15E: Gina Ripley, president of Dearing Company, is considering the purchase of a computer-aided...

See similar textbooks

Similar questions

Austins cell phone manufacturer wants to upgrade their product mix to encompass an exciting new feature on their cell phone. This would require a new high-tech machine. You are excited about his new project and are recommending the purchase to your board of directors. Here is the information you have compiled in order to complete this recommendation: According to the information, the project will last 10 years and require an initial investment of $800,000, depreciated with straight-line over the life of the project until the final value is zero. The firms tax rate is 30% and the required rate of return is 12%. You believe that the variable cost and sales volume may be as much as 10% higher or lower than the initial estimate. Your boss understands the risks but asks you to explain the alternatives in a brief memo to the board, Write a memo to the Board of Directors objectively weighing out the pros and cons of this project and make your recommendation(s).
Gina Ripley, president of Dearing Company, is considering the purchase of a computer-aided manufacturing system. The annual net cash benefits and savings associated with the system are described as follows: The system will cost 9,000,000 and last 10 years. The companys cost of capital is 12 percent. Required: 1. Calculate the payback period for the system. Assume that the company has a policy of only accepting projects with a payback of five years or less. Would the system be acquired? 2. Calculate the NPV and IRR for the project. Should the system be purchasedeven if it does not meet the payback criterion? 3. The project manager reviewed the projected cash flows and pointed out that two items had been missed. First, the system would have a salvage value, net of any tax effects, of 1,000,000 at the end of 10 years. Second, the increased quality and delivery performance would allow the company to increase its market share by 20 percent. This would produce an additional annual net benefit of 300,000. Recalculate the payback period, NPV, and IRR given this new information. (For the IRR computation, initially ignore salvage value.) Does the decision change? Suppose that the salvage value is only half what is projected. Does this make a difference in the outcome? Does salvage value have any real bearing on the companys decision?
A manufacturer of automated optical inspection devices is deciding on a project to increase the productivity of the manufacturing processes. The estimated costs for the two feasible alternatives being compared are shown below. Use the internal rate of return (IRR) method to determine which alternative should be selected if the analysis period is 8 years and the company's MARR is 4% per year. Alternative M N Initial costs $30,000 $45,000 Net annual cash flow $4,500 $7,000 Life in years 8 8 (a) IRR of base alternative = (b) IRR of incremental cash flow = (c) Choose Alternative
The management of Kimco is evaluating the possibility of replacing their large mainframe computer with a modern network system that requires much less office space. The network would cost $760,000 (including installation costs) and would save $150,000 per year in net cash flows (accounting for taxes and depreciation) in Year 1-2, $160,000 in year3-4, and $120,000 in year 5 due to efficiency gains. The current mainframe has a remaining book value of $160,000 and would be immediately sold for $120,000. Kimco’s discount rate is 10%, and its tax rate is 25%. Based on NPV, should management install the network system?
Need answers, ASAP . The Kasibu Cooperative has invested a 145,000 new mechanical grading/sorter system which is projected to improve throughput and increase revenue by 14,000 per year for five years. The estimated market value of the sorter system at the end of five years is 5,000. Using the FW method at a MARR of 12%, is this a good investment?
Informics, Inc. is building fifth-generation software. The software quality initiatives will cost $26,800, and $37,000 is for maintenance of quality initiatives. The revenues from the initiatives: What is the cost of software quality? What is the software quality net present value? What is the return on software quality? Year Cash Flow O ($22,500) 1 51,000 2 96,250 3 96,250 4 96,250 5 96,250
1. Marginal Cost-Benefit Analysis As a financial analyst for Longview Products Company, you have been asked to evaluate a proposal for new, more efficient manufacturing equipment. The existing equipment will produce benefits over the next five years of $780,000 in today's dollars. The proposed new equipment will produce benefits of $970,000 in today's dollars over the same period. The installed cost of the new equipment is $300,000; the old equipment can be sold for $130,000. Apply marginal cost-benefit analysis to determine: a. The marginal benefits of the new equipment b. The marginal costs of the new equipment c. The net benefit of the new equipment d. Based on your calculations, what do you recommend? Why? e. What factors other than the costs and benefits should be considered before the final decision is made? 2. Interest verens Dividend Exnence
Environmentally conscious companies are looking for ways to be less damaging to the environment while saving money with innovative investments in capital equipment. DuPont is sponsoring a project to recover much of the energy presently being lost in the primary stage of one of their chemical reactor vessels. Three mutually exclusive designs are being considered for implementation. The estimated capital requirements and annual savings in operating expenses are given below. Assume aMARR = 15% per year, and the study period is 6 years. Salvage values of the three designs are negligible. Which design should be selected?
1. Marginal Cost-Benefit Analysis As a financial analyst for Longview Products Company, you have been asked to evaluate a proposal for new, more efficient manufacturing equipment. The existing equipment will produce benefits over the next five years of $780,000 in today's dollars. The proposed new equipment will produce benefits of $970,000 in today's dollars over the same period. The installed cost of the new equipment is $300,000; the old equipment can be sold for $130,000. Apply marginal cost-benefit analysis to determine: a. The marginal benefits of the new equipment b. The marginal costs of the new equipment c. The net benefit of the new equipment d. Based on your calculations, what do you recommend? Why? e. What factors other than the costs and benefits should be considered before the final decision is made? 2. Interest versus Dividend Expense Longview Products Company (LPC) expects earnings before interest and taxes of $575,000 for this year. Under the 2018 tax law, LPC is…
A large water utility is planning to upgrade its SCADA system for controlling well pumps, booster pumps, and disinfection equipment so that everything can be centrally controlled. Phase I will reduce labor and travel costs by $28,000 per year. Phase II will reduce costs by an additional $20,000 per year, that is, $48,000. Phase I savings should occur in years 0, 1, 2, and 3 and phase II savings should occur in years 4 through 10. Let i = 8% per year. (a) Determine the present worth of the upgraded system for years 1 to 10. (b) The utility General Manager had hoped for a present worth of at least $400,000. Determine the interest rate at which this would be correct.
Assume that your company is planning to implement a new information system to improve its operations. For this purpose, the company top management is evaluating two information systems project proposals. The costs and benefits details for the two proposals are shown in the following tables. (The marginal value of money is 15% per year) Proposal A Year Costs Benefit 0 25000 0 15000 100000 2 6000 150000 3 7000 200000 Proposal B Year Costs Benefit 0 52000 0 16000 200000 2 8000 250000 3 11000 300000 Evaluate the two proposals and determine the better by using the following: 1. Payback 1 2. Net present value (NPV) 3. Return on investment (ROI)
The engineers in a manufacturing company have proposed an investment of a newconcrete batching plant to improve the quality of their products. The estimates areshown in Table 2. The minimum attractive rate of return (MARR) of the companyper year is 15%. Table 2: Estimates of New Concrete Batching PlantEstimatesInitial investment $250,000Salvage value $50,000Annual operating cost $35,000Annual revenues $90,000Study period 10 years a. Calculate the equivalent annual worth (AW) of the given investment.b. What annual revenue should be attained to reach breakeven.