3) A tank./well insulated, has two parts divided by partition. The first part incuded 5,5 kg of water at 600 kPa while the other part is evacuated. This partition is removed and the water expands to fill the entire tank. If the final pressure and temperature are 250 kPa and 150 °C, respectively, please determine a- The volume of the tank ( b- Temperature of the water for first part

3) A tank./well insulated, has two parts divided by partition. The first part incuded 5,5 kg of water at 600 kPa while the other part is evacuated. This partition is removed and the water expands to fill the entire tank. If the final pressure and temperature are 250 kPa and 150 °C, respectively, please determine a- The volume of the tank ( b- Temperature of the water for first part

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter1: Heat, Temperature, And Pressure

Section: Chapter Questions

Problem 6RQ: One British thermal unit will raise the temperature of _____ 1b of water _____F.

See similar textbooks

Similar questions

The two ways that fresh air enters a structure are _______and_____.
the specific heat capacity of the system during a certain process is given by Cn(0.4+0.004T) kJ/kg deg. celcius. if the mass of the gas is 6kg and its temperature changes from 25 def. celcius to 125 def. celcius find the mean specific heat of the gas
Skg of Steam at pressure of 4.9 bar is produ- ced from water at 20c. Determine the amount of heat supplied if the Steam is o.9 dy.
A 300 L rigid tank contains Methane gas at 35 °C and 350 kPa. Some methane is allowed to enter the tank tell the until the density in the tank becomes 5.5 kg/m and the temperature at this point is 36 C. 3 What is the amount of gas that has entered the tank (kg)? Select one: a. 1.071 b. 1.131 c. 0.992 d. 0.922 e. None of the above
A sealed rigid vessel has a volume of 35 ft and contains 2 Ibm of water at 200 F. The vessel is now heated. If safety pressure valve is installed at what pressure should the valve be set to have a maximum temperature of 400 F?
Argon in the amount of 1.5 kg fills a 0.04-m3 pistoncylinder device at 550 kPa. The piston is now moved by changing the weights until the volume is twice its original size. During this process, argon's temperature is maintained constant. Determine the final pressure in the device in psi. Select one: O a. 550 O b. 40 O c. 80 O d. 275
Consider the closed, rigid container of water as shown. The pressure is 700 kPa, the mass of the saturated liquid is 1.78 kg, and the mass of the saturated vapor is 0.22 kg. Heat is added to the water until the pressure increases to 8 MPа. m, V Sat. Vapor Find the final temperature, m, V, Sat. Liquid enthalpy, and internal energy of the water
Question 2 Saturated water vapor is at a temperature of 220 °C. What will be its specific volume in m³/kg?
Water density at 40 C is 992.26 kg/m3. If it is cooled to 10 C whose density is 997.01 kg/m3. What is the change of volume?
Q2:- Note: 1 Torr = 0.133 kPa & 1 atm 101.325 kPa (A) A spray metal bottle is used for polishing some Aluminum samples until it is empty. Then, the rest propellant gas inside the bottle has a pressure of 1344 torr at 23 °C. Finally, if the spray bottle is thrown into a fire at a temperature equals 475 °C. Determine the pressure in the hot bottle in kPa? Assuming no change in volume.
In a steam condition of 1123 psia and 1124 °F, find the following (a) superheat (b) specific volume (c) enthalpy
A closed rigid tank has a capacity of 2.5 m3. It holds air at 400 kPa and 18 deg C. Heat is added until the temperature is 350 degC. Determine the heat added in kJ. Given a vacuum pressure of 165 mmHg. The barometric pressure is 745 mmHg. Find the absolute pressure in kPa. What is the amount of dry steam flow to an engine, which is supplied with 4500 kg per hour wet steam with a quality of 80%?