6.15 A DC shunt generator is rated 20 kW, 220 V, and 1800 rpm. It has armature and field winding resistances of 0.1 N and 110 n, respectively. The data for the magnetization curve at 1800 rpm are E, (V) 5 25 60 120 170 200 215 225 240 253 I (A) 0.0 0.1 0.25 0.5 0.75 1.0 1.25 1.5 2.0 2.3 The machine is connected as a self-excited generator. a. Determine the maximum generated voltage. b. The generator delivers full-load current at rated voltage with a field current of 2 A. Determine the resistance of the field rheostat. c. Determine the electromagnetic power and torque developed at full-load condition. d. Determine the armature reaction effect in equivalent field amperes (I) at full Joad

6.15 A DC shunt generator is rated 20 kW, 220 V, and 1800 rpm. It has armature and field winding resistances of 0.1 N and 110 n, respectively. The data for the magnetization curve at 1800 rpm are E, (V) 5 25 60 120 170 200 215 225 240 253 I (A) 0.0 0.1 0.25 0.5 0.75 1.0 1.25 1.5 2.0 2.3 The machine is connected as a self-excited generator. a. Determine the maximum generated voltage. b. The generator delivers full-load current at rated voltage with a field current of 2 A. Determine the resistance of the field rheostat. c. Determine the electromagnetic power and torque developed at full-load condition. d. Determine the armature reaction effect in equivalent field amperes (I) at full Joad

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

A 6 pole wave wound d.c. shunt generator has 500 conductors. A generator delivers 50 kW of power at 250 voltage at full load. The resistance of the field circuit is 125 2. Actual brush shift is 10°. Then find the demagnetizing and cross magnetizing ampere turns per pole and how many additional turns must be wound on each pole to eliminate the demagnetizing effect.
Two identical 2,000 kW alternator operates in parallel. The governor of the first machine is such that the frequency drops uniformly from 50 Hz at no-load to 48 Hz at full-load. The corresponding uniform speed drop of the second machine is 50 Hz to 47.5 Hz. What is the maximum load that can be delivered without overloading either machine?
A 500 V, 250 kW, long shunt compound generator induces an e.m.f. of 480 V whenrunning at 1000 r.p.m. no load. On full load the spped of the machine drops to 975r.p.m. the flux increases by 15% and the terminal voltage rises to 500 V. If theseries and shunt field resistances are 0.02 ohm and 100 ohms respectively,calculate the armature resistance. Assume a voltage drop of 1V per brush.[Ans.
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. a) Draw the the figure. And find the generated voltage.
. Two dc shunt generators A and B are rated at 100 and 150 kW at 110 V respectively, Their external load characteristics may be considered as straight line. The voltage drop In the terminal voltage from no-load to full-load Is 10 V for A and 20 V ſor B. Determine the operating voltage when these generators are operated in parallel to supply a load of 220 kW.
al Power Technology A short-shunt d.c. compound generator supplies 250A at 50V. The resistance of armature, series field and shunt field windings are 0.02, 0.08 and 50 ohms respectively. Find the emf generated. The armature current la The generated voltage Eg An 8-pole d.c. generator has 455 armature conductors, and a useful flux of 44 mWb per pole. What will be the e.m.f. generated if it is lap-connected and runs at 1060 rpm? What must be the speed at which it is to driven produce the same e.m.f. if it is wave-wound?
Q.8 A 220 V, 100 Kw separately excited d.c. generator has an induced e.m.f of 230 V at full load and a brush contact drop of 2 V. the armature resistance is . ohm. (A) 0.0167 (B) 0.0176 (C) 0.0716 (D) None
.Two dc shunt generators A and B are rated at 100 and 150 kW at 110 V respectively, Their external load characteristics may be considered as straight line. The voltage drop In the terminal voltage from no-load to full-load is 10 v for A and 20 V for B. Determine the operating voltage when these generators are operated in parallel to supply a load of 220 kW.
The terminal voltage of a 150kW series generator is 600V at rated load. Determine the efficiency if the armature and series field resistances are 0.04 and 0.06 ohms respectively.
A short shunt compound DC generator supplies a load of 10A at a voltage of 10 volts. If the resistances of Armature, shunt field and series field windings are 0.01 ohm, 1 ohm and 0.00 ohm respectively. c) write down the factors to improve the generated voltage. Generated Voltage is 10.2 V
A short shunt compound generator supplies 100A at 110V. Armature resistance is 0.050 and the shunt field resistance is 570 and the series field of resistance is 0.042. if the SPL is 852, determine a)Eg b)Copper lossesin b.1)armature b.2)series b.3)shunt c)n
. When a self-excited compound DC generator supplies load, the terminal voltage is not the same as the generated emE Why? a) voltage drop across the armature resistance will reduce the voltage available at the load terminals b) where there is a series field, voltage drop across the series field resistance will reduce the voltage available at the load terminals c) both "a" and "b" d) neither "a" nor "b"