A 1000-W iron is left on the iron board with its base exposed to the air at 20°C. The convection heat transfer coefficient between the base surface and the surrounding air is 35 W/m2. C. If the base has an emissivity of 0.6 and a surface area of 0.02 m2, determine the temperature of the base of the iron.

A 1000-W iron is left on the iron board with its base exposed to the air at 20°C. The convection heat transfer coefficient between the base surface and the surrounding air is 35 W/m2. C. If the base has an emissivity of 0.6 and a surface area of 0.02 m2, determine the temperature of the base of the iron.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter1: Basic Modes Of Heat Transfer

Section: Chapter Questions

Problem 1.48P: A horizontal, 3-mm-thick flat-copper plate, 1-m long and 0.5-m wide, is exposed in air at 27C to...

See similar textbooks

Similar questions

8.15 A mercury bath at is to be heated by immersing cylindrical electric heating rods, each 20 cm tall and 2 cm in diameter. Calculate the maximum electric power rating of a typical rod if its maximum surface temperature is .
A 2-m-diameter thin-walled stainless steel spherical tank is filled with chemicals undergoing a reaction. The reaction releases heat through the tank, where the tank outer surface temperature is 50°C and is exposed to air at 20°C. The stainless steel surface of the tank has an emissivity of 0.35. Determine the rate of heat release from the chemical reaction inside the tank. Is the given emissivity value reasonable for a stainless steel surface? What is the contribution of natural convection to the overall rate of heat loss at the tank surface?
Consider a thin 16-cm-long and 20-cm-wide horizontal plate suspended in air at 20°C. The plate is equipped with electric resistance heating elements with a rating of 20 W. Now the heater is turned on and the plate temperature rises. Determine the temperature of the plate when steady operating conditions are reached. The plate has an emissivity of 0.90 and the surrounding surfaces are at 17°C. As an initial guess, assume a surface temperature of 50°C. Is this a good assumption?
Estimate the rate of heat transfer (J/s) from a 50.6°C sphere which has an emissivity of 0.2 if it is suspended in a cold volume maintained at -10.7°C. The sphere has a diameter of 0.2m. Reduce your answer in to two decimal point.
A vertical 1.5-m-high and 3.0-m-wide enclosure consists of two surfaces separated by a 0.4-m air gap at atmospheric pressure. If the surface temperatures across the air gap are measured to be 280 K and 336 K and the surface emissivities to be 0.15 and 0.90, determine the fraction of heat transferred through the enclosure by radiation.
A 0.2-m-long and 25-mm-thick vertical plate (k = 1.5 W/m∙K) separates the hot water from the cold air at 2°C. The plate surface exposed to the hot water has a temperature of 100°C, and the surface exposed to the cold air has an emissivity of 0.73. Determine the temperature of the plate surface exposed to the cold air (Ts,c). Hint: The Ts,c has to be found iteratively. Start the iteration process with an initial guess of 51°C for the Ts,c .
Consider a room having four identical walls of height 3.2 m and width 4 m each. In a hot summer day, the temperature of the inner surface of each wall is 32oC while the room air temperature is maintained at 24oC. The rate of heat loss from the room through the walls is Properties of the quiescent air: k = 0.0263 W/m.℃, ν = 15.89*10-6 m2/s, alpha= 22.5*10-6 m2/s, Pr = 0.707, β= 1/Tf = 0.00343 K-1. Select one: a. 282.6 W b. 35.3 W c. 1130.5 W d. 141.2 W
An electronic box that consumes 200 W of power is cooled by a fan blowing air into the box enclosure. The dimensions of the electronic box are 15 cm * 50 cm * 50 cm, and all surfaces of the box are exposed to the ambient except the base surface. Temperature measurements indicate that the box is at an average temperature of 32°C when the ambient temperature and the temperature of the surrounding walls are 25°C. If the emissivity of the outer surface of the box is 0.75, determine the fraction of the heat lost from the outer surfaces of the electronic box.
A small, oxidized, horizontal metal tube with an OD of 0.0254 m (1 in.), 0.61 m (2 ft) long, and with a surface temperature at 588 K (600°F) is in a very large furnace enclosure with fire-brick walls and the surrounding air at 1088 K (1500°F). The emissivity of the metal tube is 0.60 at 1088 K and 0.46 at 588 K. Calculate the heat transfer to the tube by radiation using SI units and AES units.
Determine the net heat transferred by radiation from a 9-ft square hot plate to a cold plate of equal size that are parallel to one another, and 20 ft apart if the hot plate is oxidized steel at 700°F and the cold plate is dull brass at 175°F.Ans: 2,863 Btu/hr
Question 4:Consider a person standing in a room maintained at20°C at all times. The inner surfaces of the walls, floors, andceiling of the house are observed to be at an average temperature of 12°C in winter and 23°C in summer. Determine therates of radiation heat transfer between this person and the surroundingsurfaces in both summer and winter if the exposedsurface area, emissivity, and the average outer surface temperatureof the person are 1.6 m2, 0.95, and 32°C, respectively.
A certain 1m body at 20 C is display on a top of a building during the night. the body sees nothing but the sky which has an effective temperaure of 110 k. determine the heat transfer rate from the body to the sky if the body temperature is maintained at 23 C. the surface emissivity of the body is equal to 0.90