A 3-phase, Y connected, round rotor synchronous generator rated at 12kVA, 240V has a Synchronous reactance of 1.2Ω per phase and an armature resistance of 0.6Ω per phase. Calculate: i) The generated phase voltage at full load and 0.8 lagging power factor. ii) The percentage voltage regulation at full-load with 0.8 lagging power factor. iii) The generated phase voltage at full load and 0.8 leading power factor. iv) The percentage voltage regulation at full-load with 0.8 leading power

A 3-phase, Y connected, round rotor synchronous generator rated at 12kVA, 240V has a Synchronous reactance of 1.2Ω per phase and an armature resistance of 0.6Ω per phase. Calculate: i) The generated phase voltage at full load and 0.8 lagging power factor. ii) The percentage voltage regulation at full-load with 0.8 lagging power factor. iii) The generated phase voltage at full load and 0.8 leading power factor. iv) The percentage voltage regulation at full-load with 0.8 leading power

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.8P

See similar textbooks

Similar questions

Consider a three-phase generator rated 300MVA,23kV, supplying a system load of 240 MA and 0.9 power factor lagging at 230 kV through a 330MVA,23/230Y-kV step-up transformer with a leakage reactance of 0.11 per unit. (a) Neglecting the exciting current and choosing base values at the load of 100 MVL and 230 kV. Find the phasor currents IA,IB, and IC supplied to the load in per unit. (b) By choosing the load terminal voltage IA as reference, specify the proper base for the generator circuit and determine the generator voltage V as well as the phasor currents IA,IB, and IC, from the generator. (Note: Take into account the phase shift of the transformer.) (C) Find the generator terminal voltage in kV and the real power supplied by the generator in MW. (d) By omitting the transformer phase shift altogether, check to see whether you get the same magnitude of generator terminal voltage and real power delivered by the generator.
A 3-phase, Y-connected, 60 Hz, 6 MVA, 13.2kV synchronous generator has a synchronous reactance of 0.9 ohms and negligible resistance. It supplies a constant power load at rated conditions at 0.83 pf lagging. At the load, the line current lags the line-to-neutral voltage by how many degrees?
480V, 375 kVA, 0.8 lagging power factor Y - connected synchronous generator has synchronous reactance of 0.4 ohm and negligible armature resistance. This generator is supplying power to 480V 80KW 0.8 P.F leading , Y - connected S.M with synchronous reactance of 1.1 ohm and negligible armature resistance . The S.G is adjusted to have a terminal voltage of 480V when the motor is drawing the rated power at unity power factor . Calculate 1) the magnitudes and angles of emf for both machines. 2) if the flux of motors is increased by 10 percent, what happens to the terminal voltage of power system? What is its new value ? 3) what is the power factor of the motor at the new case.
QUESTION 1:- (a) A 4-pole, 3-phase, star-connected, 50 Hz synchronous generator, with a synchronous impedance of j24.5 Ω/phase and negligible resistance, delivers 5 MW of power to a 13.8 kV busbar. At this operating point, the excitation is equal to 1.8 p.u. Calculate the phase value of the generated emf (E) and hence calculate the electrical load angle, δ, at which the machine is operating. (b) Sketch a typical operating chart for a salient pole synchronous generator and on the chart identify the following; The Apparent Power limit, The field (excitation) limit, The Real Power limit, A line which represents a constant lagging power factor, The rotor angle for operation at any given point of operation, e.g. rated power and 0.9 power factor lag. (c) A Stamford HCI534F framesize generator has been selected for a stand-alone diesel-generation application. The generator is to operate at 400 V, 50 Hz, with the self-excited (SX) excitation scheme. Datasheet information can be…
A generator rated 1MVA, 13.8 kV 60 hz 3-phase wye connected, 6-poles has 19Ω synchronous reactance per phase and negligible resistance. The field copper loss and SPL are 15 kW and 30 kW respectively. Determine the % VR and efficiency of the generator at rated load and unity power factor
A 760-kVA, 2300-V, three-phase, Y-connected, synchronous generator is operated at its rated speed to obtain its rated no-load voltage. Later, another test finds that the short-circuit phase current is 128A. The average resistance of each phase is 0.56 ohm. 1) Determine the synchronous reactance per phase. 2) Determine the voltage regulation when the generator delivers the rated load at its rated voltage and 0.75 PF lagging.
electrical machines 3. 400 V 50 Hz, Y-connected, 6-pole synchronous generator per phase synchronous reactance 1.0 Ω at back power factor of 0.9 full load armature current 50 A, friction and wind losses 1.25 kW and core losses at 50Hz full load 1.0 kW and armature resistance and loss are neglected. The excitation current is adjusted so that the no-load output voltage is 400V. According to this; a) Calculate the rotation speed of the generator. b) find the terminal voltages at load with rated current at 0.8 back power factor and unit power factor . c) Calculate the voltage regulation of the generator for power coefficients of 0.8 back and 1.0.
A three-phase synchronous generator is rated 60 MVA, 11 kV. It has an armature resistance ra = 0.1 pu and synchronous reactance xS = 1.65 pu. It is feeding into an inﬁnite bus at 11 kV delivering a current 15 kA at 0.9 power factor lagging. (a) Determine internal voltage (E) and power angle (δ). (b)Draw a vector diagram for this operation and state operating mode of the generator.(c) Infinite bus voltage falls to 10 kV while the mechanical power input to generator and itsexcitation remains unchanged. What is the value of the current, power factor and reactivepower delivered to the infinite bus.Per-unit values are given on machine rating as the base.
A 2-pole, 50 Hz, 11 kV synchronous generator with a rating of 120 MW and 0.87 lagging power factor has a moment of inertia of 12,000 kg- . Calculate the constants H and M A 4-pole synchronous generator supplies over a short line a load of 60 MW to a load bus. If the maximum steady state capacity of the transmission line is 110 MW, determine the maximum sudden increase in the load that can be tolerated by the system without losing stability
A 400V, 50Hz, Y-connected, 4-pole synchronous generator has a per-phase synchronous reactance of 0.5 Ω. Its full-load armature current is 50A at power factor of 0.8 lagging. The armature resistance is negligible. Calculate: (i) Per-phase internal generated voltage, EA. (ii) The terminal line voltage of the generator if the generator is loaded at 40 A at power factor of 0.8 lagging. (iii) Draw the phasor diagram for (ii) with a proper label (iv) The load at (ii) is removed and three 12 Ω resistors are connected in wye across the terminals of the generator. Calculate the terminal voltage across the generator