A class A pan was set up adjacent to a lake. The depth of water in the pan at the begin- ning of a certain week was 195 mm. In that week there was a rainfall of 45 mm and 15 mm of water was removed from the pan to keep the water level within the specified depth range. If the depth of the water in the pan at the end of the week was 190 mm calculate the pan evaporation. Using a suitable pan coefficient estimate the lake evapo- ration in that week.

A class A pan was set up adjacent to a lake. The depth of water in the pan at the begin- ning of a certain week was 195 mm. In that week there was a rainfall of 45 mm and 15 mm of water was removed from the pan to keep the water level within the specified depth range. If the depth of the water in the pan at the end of the week was 190 mm calculate the pan evaporation. Using a suitable pan coefficient estimate the lake evapo- ration in that week.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter27: Commercial Ice Machines

Section: Chapter Questions

Problem 30RQ

See similar textbooks

Similar questions

1. How can recognize an extensive or intensive properties such as density, colour of gold, Volume of water in a graduated cylinder. 2. Drive the relation 1-x = Vavg me 3. A glycerin pump is powered by a 5-kW electric motor. The pressure differential between the outlet and the inlet of the pump at full load is measured to be 211 kPa. If the flow rate through the pump is 18 L/s and the changes in elevation and the flow velocity across the pump are negligible, the overall efficiency of the pump is (a) 69 percent (b) 72 percent (c) 76 percent (d) 79 percent (e) 82 percent.
A 6.0-m diameter cylindrical tank contains a hazardous material dissolved in mostly water. A leak occurred in the tank because a 0.1 m diameter pipe located 1.0 m above the bottom of the tank was accidentally disconnected. A 30-minute emergency response time is required to stop the leak. If the tank is vented to the atmosphere, calculate the following a) If total emptying time is 2.5 hours what is the original liquid level in the tank just prior to the spill. b) What is the liquid level in the tank at the end of the spill? (e c) Estimate the total amount of liquid spilled from the tank in m³ (V) and in kg (m). 2) (Assuming Co=0.61 for the highly turbulent flow; Assuming p = pwater =1000 kg/m³) | P₁ = 0 น hL 1 m P = Ambient Pressure
28 cmid%3D11764 OCDensity of the water. O d. Gradient in the pressure Clear my choice According to the graph of the temperature measurement methods experiment shown in the figure below, what should be the parameter varying on the y axis: Select one: Ca Temceature 1 Expanslon coe Od. Pressure Selec oner
B. Read are these sentences and choose the True or False. Answer only five 3-The Fluid friction apparatus in (major losses turbulent flows experiment) it is: h/ u V hoc u Log Ihl Where: h:the loss of head due to pipe friction. u :the velocity. 4- The Reynolds number is a ratio of an inertia force operation to a viscous force. Log lul
86 N/cm"] 11. A single column vertical manometer (ie., micrometer) is connected to a pipe containing oil of sp. gr. 0.9. The area of the reservoir is 80 times the area of the manometer tube. The reservoir contains mercury of sp. gr. 13.6. The level of mercury in the reservoir is at a height of 30 cm below the centre of the pipe and difference of mercury levels in the reservoir and right linb is 50 cm. Find the pressure in the pipe. (Ans. 6.474 N/em) 12. A pipe contains an oil of sp. gr. 0.8. A differential manometer connected at the two points A and B of the pipe shows a difference in mercury level as 20 cm. Find the difference of pressure at the two paints. [Ans. 25113.6 N/m³) 13. A U-tube differential manometer connects two pressure pipes A and B. Pipe A contains carbon tetrachlo- ride having a specific gravity 1.594 under a pressure of 11.772 N/cm and pipe B contains oil of sp. gr. 0.8 under a pressure of 11.772 N/cm. The pipe A lies 2.5 m above pipe B. Find the difference of…
The pressure in automobile tire depends on the temperature of the air in the tire. When the air temperature is 30°C, the pressure gage reads 250KP.. The volume of the tire is 0.030 m'and the atmospheric pressure is 100KP.. The gas constant of the air is 0.287 KPa.m2/Kg.K. The gage pressure in the tire when the air temperature rises to 60 °C is Select one: O a. 2209 KPa Ob.285.25 KPa Oc305.8 KPa Od 274.75 KPa
chose the right answer The rise of liquid surface in a glass tube is :known as surface tension O capillary rise O high pressure : Surface tension on a hollow bubble is 8pd O pd/8 N/m2 O pd/8 N/m O pd/4 N/m O
COMPLETE SOLUTION with given and required ASAP STELI Aerospace are planning to design a spherical cryogenic tank to be stored with liquid hydrogen. Itis also designed with a system that if the tank reaches maximum capacity all entry and exit nozzles willautomatically be closed. The specific gravity of this fluid is approximately seven hundredths the densityof water. The tank is designed to have two-entry filtration system and an exit nozzle located at the bottom.The liquid hydrogen flows into the cryogenic tank at a rate of 0.85 kilograms per second and 0.45kilograms per second. At the same time the exit nozzle is opened with a rate of 0.005 kilograms persecond. (a)The shutoff valves were closed after 30 minutes, what is the volume and radius of the sphericaltank? (b) Using your answers on item a, how full is the tank (in percentage) after 18.75 minutes?
8 P Flag question Two ends of an U-tube manometer which contains mercury, is connected between two pipes (A & B), that carries of oil of specific gravities 1.8 & 1.2 respectively. The center of the pipe A (left limb) is 12 cm above the pipe B (right limb). The mercury level difference in the right limb is 3.1 cm and the height of fluid in the right limb is 6.2 cm. Find the pressure difference between these two pipes in Kilo Pascal (kPa). Draw the diagram. (diagram (Please solve the problem in a paper and upload in the separate submission link provided and also fill the answers without the unit in the box below) The difference of pressure between the pipes A & B in (kPa) = Question 13 II
Dete: Pags: of water with lsteability Jwith tembexatura: ange behavioug chosoge
1- A steam stripper is used to help removing wallpapers. It comprises of a tank of waterwith an electrical heating element. To generate steam, from which a long rubber tubeconveys the steam to the head which contact with the wallpaper to be removed.(i) The power rating of the electrical heating element is 2 KW, and the tank holds about3 liters of water. Estimate the time it would take from switching the power on tosteam to be generated. (ii) Once steam has started to be produced, estimate how long you could workcontinuously before having to refill the tank. Assume that all water initially in thetank can be evaporated into steam. Also, neglect any heat loss from the tank.Data :Room Temperature 20 oCHeat capacity of water, Cp 4.19 KJ kg-1 K-1Latent heat of vaporization of water at 100 oC, hfg 2257 KJ kg-1(iii) Stream is to be condensed in the condenser of a steam power plant at atemperature of 50 oC with cooling water from a nearby lake which enters the tubesof the condenser at 18 oC at…
Find specific volume of saturated vapour at 343 K Specific volume m'hg Internal energy king Entholpy king Entropy Sot. Press. Sot. Sot. Sot. Sot. Sot. Sot. Sot. Sot. Temp. Liquid Vopor Liquid évop. Vopor Liquid Evop. Vopor Liquid Evop. Vopor 001 0.6117 0.001000 206.00 0.000 2374.9 2374.9 0.001 2500.9 2500.9 0.0000 9.1556 9.1556 0.8725 0.001000 147.03 21.019 2360.8 2381.8 21.020 2489.1 2510.1 0.0763 8.9487 9.0249 10 1.2281 0.001000 106.32 42.020 2346.6 2388.7 42.022 2477.2 2519.2 0.1511 8.7488 8.8999 15 1.7057 0.001001 77.885 62 980 2332.5 2305.5 62.982 2465.4 2528.3 0.2245 8.555 8.7803 20 2.3392 0.001002 57.762 83.913 2318.4 2402.3 83.915 2453.5 2537.4 0.2965 8.3000 8.0001 25 3.1698 0.001003 43.340 104.83 2304.3 2409.1 104.83 2441.7 254ó.5 0.3672 8.1805 85567 30 4.2409 0.001004 32.879 125.73 2290.2 2415.9 125.74 2429.8 2555.6 0.4368 8.0152 8.4520 35 5.0291 0.001006 25.205 146.63 2276.0 2422.7 146.64 2417.9 2564.6 0.5051 7.8466 8.3517 40 7.3851 0.001008 19.515 167.53 2261.9 2429.4…