A flexible pavement is constructed with 3 inches of hot-mix asphalt (HMA) wearing surface, 6 inches of emulsion/aggregate-bituminous base, and 6 inches of crushed stone subbase. The subgrade has a soil resilient modulus of 8,000 lb/in² , and M2 and M3 are equal to 1.0 for the materials in the pavement structure. The overall standard deviation is 0.5, the initial PSI is 4.5, and the TSI is 2.5. The daily traffic has 1080 20-kip single axles, 400 24-kip single axles, and 680 40-kip tandem axles. How many years would you estimate this pavement would last (how long before its PSI drops below a TSI of 2.5) if you wanted to be 90% confident that your estimate was not too high, and if you wanted to be 99% confident that your estimate was not too high?

A flexible pavement is constructed with 3 inches of hot-mix asphalt (HMA) wearing surface, 6 inches of emulsion/aggregate-bituminous base, and 6 inches of crushed stone subbase. The subgrade has a soil resilient modulus of 8,000 lb/in² , and M2 and M3 are equal to 1.0 for the materials in the pavement structure. The overall standard deviation is 0.5, the initial PSI is 4.5, and the TSI is 2.5. The daily traffic has 1080 20-kip single axles, 400 24-kip single axles, and 680 40-kip tandem axles. How many years would you estimate this pavement would last (how long before its PSI drops below a TSI of 2.5) if you wanted to be 90% confident that your estimate was not too high, and if you wanted to be 99% confident that your estimate was not too high?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A flexible pavement is constructed with 3 inches of hot-mix asphalt (HMA) wearingsurface, 6 inches of emulsion/aggregate-bituminous base, and 6 inches of crushedstone subbase. The subgrade has a soil resilient modulus of 8,000 lb/in2 , and M2 andM3 are equal to 1.0 for the materials in the pavement structure. The overall standarddeviation is 0.5, the initial PSI is 4.5, and the TSI is 2.5. The daily traffic has 1080 20-kipsingle axles, 400 24-kip single axles, and 680 40-kip tandem axles. How many yearswould you estimate this pavement would last (how long before its PSI drops below aTSI of 2.5) if you wanted to be 90% confident that your estimate was not too high,and if you wanted to be 99% confident that your estimate was not too high?
A flexible pavement is constructed with 4 inches of hot-mix asphalt (HMA) wearing surface, 8 inches of emulsion/aggregate-bituminous base, and 8 inches of crushed stone subbase. The subgrade has a soil resilient modulus of 10,000 lb/in^2, and M2 and M3 are equal to 1.0 for the materials in the pavement structure. The overall standard deviation is 0.5, the initial PSI is 4.5, and the TSI is 2.5. The daily traffic has 1080 20-kip single axles,400 24-kip single axles, and 680 40-kip tandem axles. How many years would you estimate this pavement would last (how long before its PSI drops below a TSI of 2.5) if you wanted to be 99%confident that your estimate was not too high
A specific subgrade layer of a flexible pavement has thickness equivalent t to 300 mm, if the contact radius of the wheel is assumed to be 250 mm and subgrade bearing capacity is equivalent to 0.24 Megapascals, calculate the maximum wheel load in kN, the pavement is allowed to carry.
Subject: Transportation Engineering An asphalt pavement carries a static wheel load of 125 kN. The circular contact radius of the tire is 180 mm and the transmitted load is distributed across a wide area of subgrade at an angle of 47°. The subgrade bearing value is 0.30 MPa while that of the base is 0.60 MPa. Design the thickness of the pavement and that of the base ? Please give me right solution.. urgenttttttttt help me Thank you
A flexible pavement is constructed with 4 inches of hot-mix asphalt wearing surface, 10 inches soil cement base and 10 inches crushed stone subbase. The subgrade has a soil resilient modulus of 12,000 lb/in2, M2 = 1.5 and M3=1.127 for the materials of the pavement structure. The overall standard deviation is 0.5, the initial PSI = 5.0 and the terminal serviceability index (TSI) is 2.5. The daily traffic has 3000 cars, 1000 trucks and 500 trailers. The axle weights are: How long in years would the pavement last if R = 98% ? (Final answer to 2 decimal places)
17. In the Asphalt Institute flexible pavement design approach, Where are the critical stress and strain locations checked?a. Top of the asphalt concrete layerb. Middle of the asphalt concrete layerc. Bottom of the asphalt concrete layerd. Bottom of the asphalt concrete layer and top of the subgrade
A flexible pavement is constructed with 4 inches of hot-mix asphalt wearing surface, 10 inches soil cement base and 10 inches crushed stone subbase. The subgrade has a soil resilient modulus of 12,000 Ib/in2, M2 = 1.5 and M3=1.127 for the materials of the pavement structure. The overall standard deviation is 0.5, the initial PSI = 5.0 and the terminal serviceability index (TSI) is 2.5. The daily traffic has 3000 cars, 1000 trucks and 500 trailers. The axle weights are: Cars: 20000 lb single axle 10000 lb single axle Trucks: 600O Ib single axle 18000 lb single axle Trailers: 8000 lb single axle 14000 lb tandem axle 40000 lb triple axle How long in years would the pavement last if R = 98% ? (Final %3D answer to 2 decimal places)
Q3/Choose the correct answer 1. In general PSI for flexible pavement depend on............ Va. Cracking, Patching and Rutting b. Cracking and Patching c. Patching and Rutting d. Rutting 2. The Maximum contraction joint spacing for plain jointed concrete pavement is C. 3.5 m b. 4.5 m c. 5.5 m d. Depends on traffic load 3. The relationship between A psi and age of pavement is...... a. A psi co age Apsi ∞ (1/age) c. A psi 02(1/age) d. Non of the above 4. The surface of the pavement should be a. Smooth b. Rough 5. Which type of aggregates gives good workability? a. Round b. Flaky c. Angular 6. Rutting may be avoided by a. Good compaction . Sufficient enough to resist skid b. Good drainage 7. Bleeding may be avoided by a. Water voids b. Air voids c. Asphalt type 12. Tie bars in cement concrete pavements are at a. Expansion joints d. All the above acceptable c. High filler percent All the above 8. The good drainage in pavement can La Increase the pavement life b. Decrease the pavement life…
Design a pavement for a rural interstate highway. The expected design ESAL is 13x106. The pavement structure is to consist of asphalt concrete with an elastic modulus of 400000psi, a granular base with an elastic modulus of 26000psi, and a granular subbase with an elastic modulus of 12000psi. The elastic modulus of the subgrade is 8000psi. It is estimated that it will take a week for water to drain from the pavement and that the pavement will be saturated about 15% of the time. Assume that a reliability level o about 90% is required and that the initial serviceability index is 4.2 and the final serviceability index is 2.5.
What is the average pavement density if the pavement thickness is 300mm by expansion pressure method. The expansion pressure is 0.150kg/cm².
A rigid pavement is to be used to carry a wheel load of 51.13 kN. Enough dowels will be used across the joint. What will be the difference in thickness (in mm) between the edge and the center of the pavement? The allowable tensile strength of concrete is 1.32 Mpa
Give me right solution... Urgent please A 5 tonne wheel load is applied on a pavement and generates a surface deflection of 0.15 mm. A. If the pavement is 125 mm thick, what is the vertical stress at the top of the subgrade? B. If the equivalent radius of tyre contact is 100 mm and Poisson’s ratio is 0.3, what is the pavement’s modulus of elasticity