A rifle bullet with mass 4.00 gm strikes and embeds itself in a block with mass 0.996 Kg that rests on a frictionless, horizontal surface and is attached to a coil spring. The impact compresses the spring 15.0 cm. Calibration of the spring shows that a force of 0.750 N is required to compress the spring 0.75 cm. What was the bullet's initial speed? wwww

A rifle bullet with mass 4.00 gm strikes and embeds itself in a block with mass 0.996 Kg that rests on a frictionless, horizontal surface and is attached to a coil spring. The impact compresses the spring 15.0 cm. Calibration of the spring shows that a force of 0.750 N is required to compress the spring 0.75 cm. What was the bullet's initial speed? wwww

Name: A rifle bullet with mass 4.00 gm strikes and embeds itself in a block
Uploaded: 2024-03-20T06:57:37.000Z
Channel: Bartleby
Description: A rifle bullet with mass 4.00 gm strikes and embeds itself in a block with mass 0.996 Kgthat rests on a frictionless, horizontal surface and is attached to a coil spring. The impactcompresses the spring 15.0 cm. Calibration of the spring shows that

Classical Dynamics of Particles and Systems

5th Edition

ISBN:9780534408961

Author:Stephen T. Thornton, Jerry B. Marion

Publisher:Stephen T. Thornton, Jerry B. Marion

Chapter9: Dynamics Of A System Of Particles

Section: Chapter Questions

Problem 9.60P

See similar textbooks

Similar questions

A cannon is rigidly attached to a carriage, which can move along horizontal rails but is connected to a post by a large spring, initially unstretchcd and with force constant k = 2.00 104 N/m, as shown in Figure P8.60. The cannon fires a 200-kg projectile at a velocity of 125 m/s directed 45.0 above the horizontal. (a) Assuming that the mass of the cannon and its carriage is 5 000 kg, find the recoil speed of the cannon. (b) Determine the maximum extension of the spring. (c) Find the maximum force the spring exerts on the carriage. (d) Consider the system consisting of the cannon, carriage, and projectile. Is the momentum of this system conserved during the firing? Why or why not?
To get up on the roof, a person (mass 70.0 kg) places 6.00-m aluminum ladder (mass 10.0 kg) against the house on a concrete pad with the base of ladder 2.00 m from the house. The ladder rests against a plastic rain gutter, which we can assume to frictionless. The center of ladder is 2.00 m from the bottom. The person is standing 3.00 m from the bottom. Find the normal reaction and friction forces on the ladder at its base.
3. What is the speed of the block of mass m1 5.0 kg and of the ball of mass m2 10 kg when it has fallen a distance h 1.0 m? The system starts from rest and neglect the friction between the block and the surface.
A 23-g rifle bullet traveling 220 m/sm/s buries itself in a 3.0-kg pendulum hanging on a 2.0-m-long string, which makes the pendulum swing upward in an arc. Determine the vertical and horizontal components of the pendulum's maximum displacement. Enter your answers numerically separated by a comma. Express your answers using two significant figures.
A 60-N sledge hammer shown in the figure strikes the 90 N wood block which is at rest on the coil spring. The striking velocity of the hammer is óm/sec and the block and hammer are assumed to remain in contact after striking. What is the scale of the spring if the blow causes the spring to be compressed 50mm? Answer in N/mm and in 2 decimals.
I got this question wrong, I got 0.161 meaters as my final answer can someone please give me detailed steps on my process? An 26 g rifle bullet traveling at 370 m/s buries itself in a 4.8 kg pendulum hanging on a 2.2 m long string, which makes the pendulum swing upward in an arc. Determine the maximum vertical displacement of the pendulum (height).(g = 9.8 m/s2)
#6. A 1.0 kg steel ball and a 2.0 m cord of negligible mass make u simple pendulum that can pivot without friction about the point O, as in Figure 3. This pendulum is released from rest in a horizontal position, and when the ball is at its lowest point it strikes a 1.0 kg block sitting at rest on a shelf. Assume that the collision is perfectly elastic and that the coefficient of kinetic friction between the block and shelf is 0.10. (A) What is the velocity of the block just after impact? (B) How far foes the bock slide before coming to rest (assuming that the shelf is long enough)? 1.0 kg 2.0 m kg 0
A 28 g rifle bullet is fired at a 3.1 kg ballistic pendulum hanging on a 2.8 m long string and embeds itself, which makes the pendulum swing upward in an arc. Determine the bullets initial velocity if the pendulum’s maximum y-displacement is 0.2 m. Your answer should have 4 significant figures. The bullets initial velocity is _____ m/s.
A 0.02-kg bullet collides with a 5.75-kg pendulum. After the collision, the bullet remains embedded onto the pendulum and the pair swings up to a maximum height of 0.386m. What is the initial speed of the bullet?
A crate is attached to a winch or pulley that pulls the crate upwards. The crate has a mass of 120 kg and the coefficient of static and kinetic friction between the crate and surface is 0.60 and 0.50, respectively. The crate starts from rest and the surface is measured 30° from the horizontal. If the pulley exerts a tension T = 1220 + 200t, a. What is the impulse applied to the crate during the first second of motion? b. After 1 second, what is the velocity of the crate? c. Compute the power transmitted to the winch after the first second.
In a ballistic pendulum experiment, a small marble is fired into a cup attached to the end of a pendulum. If the mass of the marble is 0.0215 kg and the mass of the pendulum is 0.250 kg, how high h will the pendulum swing if the marble has an initial speed of 5.05 m/s? Assume that the mass of the pendulum is concentrated at its end so that linear momentum is conserved during this collision. h = .8 m Incorrect
A 0.650 kg hammer is moving horizontally at 8.50 m/s when it strikes a nail and comes to rest after driving it 1.00 cm into a board. (a) Calculate the duration of the impact.s(b) What was the average force exerted on the nail?N