I REPEAT. TYPEWRITTEN ONLY ANSWERSDO NOT ANSWER IF YOU ALREADY ANSWERED THIS.DO THIS TYPEWRITTEN ONLY. I'LL UPVOTEDOWNVOTE IF HANDWRITTEN THANK YOU. An aluminum pipe with a length of 60 m at a temperature of 10°C rests freely on theground. An adjacent steel pipe at the same temperature is 5 mm longer than the aluminum pipe.No. 1.(a) At what temperature (degrees Celsius) will the aluminum pipe be 15 mm longer than the steelpipe? (Assume that the coefficients of thermal expansion of aluminum and steel areaa=23x10-6/°C and as=12x10-6/°c, respectively.)(b) What is the axial stress developed in the aluminum pipe with 30 mm diameter when thetemperature was increased?5 mmAluminunSteelFigure No. 1

Answer:- The length of the ALUMINUM pipe after the change in temperature can be expressed as by the…

An aluminum pipe with a length of 60 m at a temperature of 10°C rests freely on the ground. An adjacent steel pipe at the same temperature is 5 mm longer than the aluminum pipe. (a) At what temperature (degrees Celsius) will the aluminum pipe be 15 mm longer than the steel pipe? (Assume that the coefficients of thermal expansion of aluminum and steel are No. 1. aa=23x10-6/°C and as=12x10-6/°C, respectively.)

An aluminum pipe with a length of 60 m at a temperature of 10°C rests freely on the ground. An adjacent steel pipe at the same temperature is 5 mm longer than the aluminum pipe. (a) At what temperature (degrees Celsius) will the aluminum pipe be 15 mm longer than the steel pipe? (Assume that the coefficients of thermal expansion of aluminum and steel are No. 1. aa=23x10-6/°C and as=12x10-6/°C, respectively.)

Materials Science And Engineering Properties

1st Edition

ISBN:9781111988609

Author:Charles Gilmore

Publisher:Charles Gilmore

Chapter3: The Structure Of Real Materials

Section: Chapter Questions

Problem 3.12P

See similar textbooks

Similar questions

An aluminum pipe has a length of 64 m at a temperature of 15°C. An adjacent steel pipe at the same temperature is 2 mm longer. At what temperature will the aluminum pipe be 6 mm longer than the steel pipe? Assume that the coefficient of thermal expansion for the aluminum is 22.5x10-6/°C and that the coefficient of thermal expansion for the steel is 12.5x10-6/°C. Answer: T₁= i °℃
No. 1. (10 Pts) An aluminum pipe with a length of 60 m at a temperature of 10°C rests freely on the ground. An adjacent steel pipe at the same temperature is 5 mm longer than the aluminum pipe. (a) At what temperature (degrees Celsius) will the aluminum pipe be 15 mm longer than the steel pipe? (Assume that the coefficients of thermal expansion of aluminum and steel are aa=23x10-6/"C and as=12x10-6/ c, respectively.) (b) What is the axial stress developed in the aluminum pipe when the temperature was increased? 5 mm Aluminun Steel Figure No. 1
An aluminum pipe has a length of 65 m at a temperature of 16°C. An adjacent steel pipe at the same temperature is 5 mm longer than the aluminum pipe. At what temperature (in degrees Celsius) will the aluminum pipe be 14 mm longer than the steel pipe? (Assume that the coefficients of thermal expansion of aluminum and steel are a, = 23 x 10-6/°C and a = 12 x 10-6/°C, respectively. Also assume that the temperature of both pipes change equally.) °C
A prismatic bar 50°F is imbedded in a rigid concrete wall. The bar is 40 in long and has a cross-sectional area of 4 in?. What is the axial force in the bar if its temperature is raised to 100°F? Assume cocfficient of thermal expansion is 5x10%F and modulus of clectricity is 32x10° psi.
An aluminum pipe has a length of 60 m at a temperature of 10° C. An adjacent steel pipe at the same temperature is 5 mm longer than the aluminum pipe. At what temperature (degrees Celsius) will the aluminum pipe be 15 mm longer than the steel pipe? (Assume that the coefficients of thermal expansion of aluminum and steel are aAL=23x 10^-6°C and as=12x10^-6° C respectively)
A 13 in length of aluminum tubing (with E = 11.4 x 106 psi and  = 12 x 10-6 /deg F) having a cross-sectional area of 1.6 in2 is installed with “fixed” ends so that it is stress-free at 70 deg F. In operation, the tube is heated throughout to a uniform 500 deg F. Careful measurement at the higher temperature indicates that the fixed ends separate to 13.008 in. What loads are exerted on the ends of the tube, and what are the resultant stresses?
An aluminum pipe with a length of 60 m at a temperature of 10°C rests freely on the ground. An adjacent steel pipe at the same temperature is 5 mm longer than the aluminum pipe. (a) At what temperature (degrees Celsius) will the aluminum pipe be 15 mm longer than the steel pipe? (Assume that the coefficients of thermal expansion of aluminum and steel are ca=23x10-6/°C and as=12x10-6/°C, respectively.) (b) What is the axial stress developed in the aluminum pipe when the temperature was increased? Aluminun Steel Figure No. 1 5 mm
An aluminum pipe has a length of 75 m at a temperature of 18°C. An adjacent steel pipe at the same temperature is 0.005 m longer than the aluminum pipe. At what temperature (0C) will the aluminum pipe be 0.015 mm longer than the steel pipe? (Assume that the coefficients of thermal expansion of aluminum and steel are aa = 23 x 10–6/°C and as = 12 x 10–6/°C, respectively.)
An aluminum pipe with a length of 60 m at a temperature of 10°C rests freely on the ground. An adjacent steel pipe at the same temperature is 5 mm longer than the aluminum pipe. (a) At what temperature (degrees Celsius) will the aluminum pipe be 15 mm longer than the steel pipe? (Assume that the coefficients of thermal expansion of aluminum and steel are a=23x10-6/°C and as-12x10-6/ c, respectively.) (b) What is the axial stress developed in the aluminum pipe when the temperature was increased? 5 mm Aluminun Steel Figure No. 1
2 A rigid bar is supported by two copper ro ds and the gap (A) between the aluminu m rod and the bar is 1.50 mm. If the temp erature for all materials is increased by 4 0 degrees Celsius, what is the thermal str ess of the aluminum rod? Disregard the weight of the rigid bar. For each copper bar, A = 500 mm^2, E = 120 GPa, and a = 1 6.8 μm/(m. C). For the aluminum bar, A = 400 mm^2, E = 70 GPa, and a = 23. 1 μm/(m. C).(5 Copper Aluminum Copper 750 mm
The aluminum tube AB of cross section has a fixed support on the base and is supported by a pin at the top of a horizontal beam supporting a load Q = 200 kN. Determine the required thickness t of the tube if its outside diameter for 100 mm and the necessary safety factor in relation to Euler buckling for n = 3.0 (assuming A = 72 GPa). I know the answer, but I cannot understand the critical charge formula. I don't know why to use the constant 2.046 in the formula, can you please show me?
Q8: Consider a steel rod of fixed ends. If the temperature of the rod is increased by AT-80 °C, then the generated thermal stress (in MPa) in the rod is: (Hint: For the steel, the Young's modulus (Y) is 2x10 N/m and the coefficient of linear thermal expansion (a) is 11 x 106 ly a) 2.2 b) 176.0 c) 352 d) 776.6