Q.4urDuring the trial of a single-cylinder, four-strok oll engine, the followingtesults were obtained.Cylinder diametaStrokeMean effective pressureTorqueSpeedOil consumptionCalorific value of fuelCooling water flow rateAir used per kg of fuelRise in cooling water tamperat ureTemperature of exhaust gaWNRoom tamperat ureMean spedfie beat of exhoust gwSpecifie heat of water20 an40 am6 bar407 Nm250 rpm1 kg/h13 MJ/kg1.5 kg/min30 kg45 "C120 C20 °CI kI/kg KL.I8 kJ/kg KFind the ip.bp and draw upa heat balane sheet for the test in kl/h.

To find: The Indicated and break power and also draw heat balance sheet. Given: The diameter of…

anDuring the trial of a single-cylinder, four-stroke oil engine, the following results were obtained. Cylinder diameter Mean effective pressure Torque Speed 4 kg/h Oil consumption Calorific value of fuel Cooling water flow rate 4.5 kg/min 30 kg Air used per kg of fuel Rise in cooling water temperature Temperature of exhaust gases Room temperature Mean specific heat of exhaust gas Specific heat of water 4.18 kJ/kg K Find the ip, bp and draw up a heat balance sheet for the test in kl/h. = =

anDuring the trial of a single-cylinder, four-stroke oil engine, the following results were obtained. Cylinder diameter Mean effective pressure Torque Speed 4 kg/h Oil consumption Calorific value of fuel Cooling water flow rate 4.5 kg/min 30 kg Air used per kg of fuel Rise in cooling water temperature Temperature of exhaust gases Room temperature Mean specific heat of exhaust gas Specific heat of water 4.18 kJ/kg K Find the ip, bp and draw up a heat balance sheet for the test in kl/h. = =

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

2) a) Prove usiug the KP statement of the 2u¢ law which taltej in neaf from a coid veservon aud not possible: that au eugiue a uet veserioir s b) Explain how to measure the themmo dyudmik temperature of au dbject us ing a 31 al Ueo kinotio thoon Caruot engine with the úsual reference staudand.
1:09 PM O FINAL EXAMINATION IN ME 324 6 of 10 47:48 / 03:00:00 A test on a single-cylinder, four-stroke cycle gasoline engine yielded the following data: Torque = 950 N m Indicated mean effective pressure = 759 kPa, Bore = 28 cm, Stroke = 30.5 cm, Speed = 300 rpm, Fuel consumption = 10.9 .and hr Heating value of the fuel = 41,900 Determine the kg Mechanical efficiency 83.73 % 81.49 % = 79.52 % 77.79 % Next » II
3.1 A 3 liters S.I. V6 engine that operates on a four-stroke of 3000 revolution per minute, the compression ratio is 10, the lengths of the connecting rod and the crank offset are 15 cm and 4 cm respectively, the combustion is completed at 35° of the crankshaft rotation after I need an answer as soon as possible, and I hope it will be clear. Greetings, my bro. TDC, the engine is running with the stoichiometric air-fuel ratio, mechanical efficiency 90%. If the engine is connected to a dynamometer which its reading of 100 kW. Calculate: 1-piston speed at end of the combustion, 2-volume of the combustion chamber at end of the combustion, 3-engine torque, 4- indicated mean effective pressure and 5-break specific fuel consumption.
The following data were obtained during a test of six cylinder otto cycle engine. Speed 2000 rpm, bore 3.5 in stroke 3.75 in, specific fuel consumption base on brake hp.66 lbs. / bhp-hr, brake arm 1.05 ft. HHV of fuel 20000 Btu/lb, Brake Torque 133 ft-lb, friction torque 40 ft-lb room temperature 90 F. barometric pressure 14.7 psia Find:a.) BHP=b.) BMEP=c.) IMEP=d.) IHP=e.) BRAKE THERMAL EFFICIENCY=f.) INDICATED THERMAL EFFICIENCY=
Thank you
Saturation: Pressures Specifie Volume Sa Internal Energy Sal Ligule Entropy Set. Ligurd Enthalpy Pr Tegp Ligld 10, Sat. Vaper Sal. Liquid Sat Veper Sat. Vapor Erap Er 10 DO06113 .0007 COC3 .co09 01 1.0002 206 136 1.89 1.0001 181 255 3.77 1.0001 159 675 5.45- 1.0001 142 789 00 2.75.3 23753 7.90 23700 2377.9 15.81 2364.7 23806 22.88 23600 2382.9 · O1 25013 2501.4 7.91 24969 2504 8 15.81 2492.5 2508.3 22.89 2488 5 2511.4 0000 9.1562 9.1562 0288 9.0775 9,1064 0575 8.9999 9.0573 ON29 8.9312 9,0:42 .0010 0011 0012 0013 .0014 6.98 1.0002 129 208 8.37 1.0002 118 042 9.66 LO003 108 696 10.86 11.98 29.30 2355.7 2385.0 35.17 23518 2386.9 40.58 2348.1 2388.7 45.60 2344.7 23903 50.31 23416 2391.9 29.30 24849 2514.2 35.17 2481.6 2516.8 40.58 2478.6 2519.1 45.60 2475.7 25213 503I 2473.1 2523.4 1059.R8697 8.9756 1268 8.8140 8.9408 1460 8.7631 8.9091 1637 8.7162 8.8799 1802 8.6727 8.8529 1.0004 100 755 1.0005 93 922 54.71 2338.6 2393.3 58.87 2335.8 2394.7 62.80 2333.2 2396.0 66.53 2330.7 23972 70.09…
he performance of the engine depends on inter-relationship between power developed, speed and the specific fuel consumption at each operating condition within the useful range of speed and load. Explain the inter-relationships of the given parameters.
12:38 O MENG470 - Assi... Engine friction a) Explain what do these terms mean: fmep, mfmep, pmep, amep, imep, bmep b) Write the equation relating fmep to mfmep, pmep, and amep; c) Write the equation relating fmep to imep and bmep; d) At a given engine speed, the following parameters are obtained as follows: 1600 bmep kPa 228.45 fmep kPa 124.38 mfmep kPa 29.52 amep kPa Calculate the net indicated mean effective pressure at the same engine speed. II
18 A single-cylinder, two-stroke cycle model airplane engine with a 7.54-cm displace ment produces 142 kW of brake power at 23,000 RPM using glow plug ignition. The square en- gine (bore stroke) uses 31.7 gm/min of castor oil-methanol-nitrome thane fuel at an air-fuel ratio AF = 4.5. During intake scavenging, 65% of the incoming air-fuel mixture gets trapped in the cylinder, while 35% of it is lost with the exhaust be fore the exhaust port closes. Combustion efficie ncy n = 0.94. Calculate: (a) Brake specific fuel consumption. [gm/kW-hr] (b) Average piston speed. [m/sec] (c) Unburned fuel exhausted to atmosphere. [gm/min] (d) Torque. [N-m]
The volumes of states 1, 2 and 3 of a diesel cycle operating on an ain standard are 300 cm3,2x 10-5 m3 and 60 cm3, respectively. Find the power output if the heat input is 120 kW. MExpress final answer to the NEAREST WHOLE NUMBER Do not idund off in between solution. Type only the "numerical value". No need to include the unit and percent sign. Answer. kW
A crawler with 1.5 m diesel engine has the following information: Cost of equipment Shipping cost Unkoading &assembling at destination Engine Crankcase capacity 1lours between oil changes Operating factor Useful life, with no salvage value Hours operated per year Weight Cost of fuel per liter Cost of oil per liter Maintenance $82260 $2448 $220 160 hp 22.71 liter 100 hr 06 6 vears 2000 61700 kg 0.33 $/liter 0.53 S/liter 100% of Depreciation 12% of Average Valuc Investment 1- what is the initial capital cost of the crawler?
The factors that tend to increase detonation is SI engine led to reduce knocking in C1 engine. Dis this statement with reference to the following influencing factor 1. Compression ratio 2. Inlet temperature 3. Self-ignition temperature of fuel 4. Time lag of ignition temperature of fuel, and 5. Combustion chamber wall temperature