BSF STATUS, ZERO BTFSS STATUS , ZERO MOVWF PORTA 89- Replace line 1 with (BCF STATUS,ZERO), which true? A)After executing the instruction in line 2 , the PIC will execute a NOP instruction, and the instruction in line 3 will be skipped B) The pic uses 4 clock pulses to execute the instruction in line 2, then uses another 4 pulses to execute the instruction in line 3 C) After executing the instruction in line 2 , the PIC will not execute a NOP instruction, and the instruction in line 3 will be skipped DJAfter executing the instruction in line 2, the PIC will execute a NOP instruction, and then execute the instruction in line 3

BSF STATUS, ZERO BTFSS STATUS , ZERO MOVWF PORTA 89- Replace line 1 with (BCF STATUS,ZERO), which true? A)After executing the instruction in line 2 , the PIC will execute a NOP instruction, and the instruction in line 3 will be skipped B) The pic uses 4 clock pulses to execute the instruction in line 2, then uses another 4 pulses to execute the instruction in line 3 C) After executing the instruction in line 2 , the PIC will not execute a NOP instruction, and the instruction in line 3 will be skipped DJAfter executing the instruction in line 2, the PIC will execute a NOP instruction, and then execute the instruction in line 3

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

25: . Find the time delay in the following program if the crystal frequency is 1 MHz. Do not ignore the time delay due to the first and last instruction. DELAY: LDI R16, 30 AGAIN: LDI R17, 35 HERE: NOP NOP DEC R17 BRNE HERE DEC R16 BRNE AGAIN RET 26: Write a program to display 2 on 7 segment. A 7 segment is connected to PortD.
Assume AL=35h; CL=05. Write the content of AL after RCR AL, CL - showing the calculation steps. Assume a CLC instruction before this RCR instruction. (Note : Solve the question in paper, scan and upload along with the other Part B and C answers) A- BI E E I E
Q3/ Initially assume all flags are set, find the values of status flags and AL after each instruction MOV AX,73 SBB AL,80 INC AX CMP AL, AH
QI) If BX=1000, DS=0200, SS=0100, CS-0300 and AL=EDH, for the following instruction: MOV [BX] + 1234H, AL. Find the physical address in the memory. Q2) For the above question, if BP is used instead of BX, what is the physical address in the memory?
19)The LMC instruction code format "ABC", is defined as _. a. C is the operation code and AB is the address b. AB is the operation code and C is the address c. A is the operation code, B is the INBOX/OUTBOX flag and C is the MAILBOX d. A is the operation code and BC is the address
26. Find the time delay in the following program if the crystal frequency is 1 MHz. Do not ignore the time delay due to the first and last instruction. DELAY: LDI R16, 30 AGAIN: LDI R17, 35 HERE: NOP NOP DEC R17 BRNE HERE DEC R16 BRNE AGAIN RET
Memory 12200 12201 12202 12203 12204 Content %D AA EE FF 22 What result is produced in the destination operand by execution the following instruction? a- LEA SI[DI+Bx+5] b- LDS SI.[200]
Q1) If BX=1000, DS=0200, SS=0100, CS=0300 and AL=EDH, for the following instruction: MOV [BX] + 1234H, AL Find the physical address in the memory. vo 10:18
1. The following instruction is executed. Assume that before execution, register R12 contains 0xA0, R15 initially contains 0x61, and the flags are ZF=0, SF=1, and CF=1. 0x indicates hexadecimal; do not include a 0x with your answer. Instruction: CMP R12, R15 After execution, register R12 contains ________(in Hex) and the flags will be ZF=_____, SF=_____ and CF=_______ 2. The following instruction is executed. Assume that before execution, register R13 contains 0x74, R11 initially contains 0x59, and the flags are ZF=0, SF=0, and CF=0. 0x indicates hexadecimal; do not include a 0x with your answer. Instruction: CMP R13,R11 After execution, register R13 contains ________(in Hex) and the flags will be ZF=_______, SF=_______ and CF=______ 3. Assume that before the instruction is executed, the flags are CF=0, ZF=0 and SF=0 and the Registers have the values AL=0x35, BL=0x0F CL=0x25 and DL=0x78. What are the values of the flags after the instruction ADD AL,0x90 executes? CF = __________, ZF…
H\W: assume Ds- 2400, show the content of register as each the following instruction execute Mov Bx, 1357, Mov SI, 1234. ES DI, (Bx) (SI]
Q3: The original contents of CX, AX, memory location Beta, and carry flag (CF) are FFE116, 11AB16, 888816, and 016, respectively. Describe the results of executing the following sequence of instructions. ADD CX, [Beta] ADC AH, 02H INC [Beta]
Please in assembly to 8086 processor and registers is 16 bit please write an assembly code to fill the memory with the multiple of tens as following:o The first row of memory multiple of A (10 in decimal)oand the second row multiples of 14 (20 in decimal) and so on till 46(100 in decimal)********* . (Note that the length of each row is 16 byte)After executing the code display the content of the memory using:For each question usef range to fill the buffer by your name. for me my name needs 12letter so i use the range from 400 to 40C