Calculate in units of hours the hydraulic retention time at peak flow in a settling tank based on the following information The settling tank is rectangular with 5 m depth. The surface loading rate is 20 cubic meters per square meter and per day at dry weather flow (DWF). Peak flow is 2 times the DWF.

Calculate in units of hours the hydraulic retention time at peak flow in a settling tank based on the following information The settling tank is rectangular with 5 m depth. The surface loading rate is 20 cubic meters per square meter and per day at dry weather flow (DWF). Peak flow is 2 times the DWF.

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter8: Seepage

Section: Chapter Questions

Problem 8.11P

See similar textbooks

Similar questions

3. A permeameter is filled with sand. When water is allowed to flow through the device, a flow rate of Q.er = 10 cm'/s is observed. The sand is dried and filled with oil. The total hydraulic head at the inflow and outflow ends of the permeameter are the same in both tests. Calculate the flow rate of oil Qol. Data: puil=0.9 pwaer Hlail = 1.8 lue
A sand sample of 35m cm^2 cross sectional area and 20cm long was tested in a constant head permeameter. Under a head of 60 cm, the discharge was 120 ml in 6min. The dry weight of sand used for the test was 1120 g, and Gs= 2.68 A. Determine the hydraulic conductivity in cm/sec. B.Determine the discharge velocity in cm/sec. C. Determine the seepage velocity in cm/sec.
An unconfined aquifer is 10 m thick and is being pumped so that one observation well placed at a distance 76 m shows a drawdown of 0.5 m. On the opposite side of the extraction well is another observation well 100 m from the extraction well, shows a drawdown of 0.3 m. Assume the coefficient of permeability of 50 m/day. a.) What is the discharge f the extraction well? b.) Suppose the well at 100 m from the extraction well is now pumped. Show with a sketch what this will do to the drawdown. c.) Suppose the aquifer sits on an aquaclude that has a slope of 1/100. Show with a sketch what this will do to the drawdown.
Please answer with complete solution and Fbd. A field sample of an unconfined aquifer is packed in a test cylinder. The length and diameter of the cylinder are 60cm and 8cm, respectively. The field sample is tested for a period of 2min under a constant head difference of 18.5 cm. As a result, 50cm3 of water is collected at the outlet. Determine the hydraulic conductivity of the aquifer sample.
A sand sample of 35 sq. cm cross sectional area and 20 cm long was tested in a constant head permeameter. Under a head of 60 cm, the discharge was 120 ml in 6 min. The dry weight of sand used for the test was 1120 g, and Gs = 2.68 1. Determine the hydraulic conductivity in cm/sec. 2. Determine the discharge velocity in cm/sec 3. Determine the seepage velocity in cm/sec
Seepage is occurring through a porous media shown in the figure. The hydraulic conductivity values (k,, k2, kg) are in m,/day. 00 Imprevious 个 15m P k, = 2 k, 3 10m 3m kg = 1 13m + 20m 10m 20m 10m The seepage discharge (m/day per m) through the porous media at section PQ is
← Darcy' Law A sand sample of 35 m² cross sectional area and 20 cm long was tested in a constant head permeameter. Under a head of 60 km, the discharge was 120 ml in 6 min. The dry unit weight of sand used for the test was 1120 g. and GS = 2.68 Take Sw = 1 g/ cm³ The hydraulic conductivity (in cm/sec) is × 10-³ X
(a) A stratified aquifer has a total thickness of 30 m and is made up of three layers. The top layer has a coefficient of permeability of 20 m/day and a thickness of 12.0 m. The middle and bottom layers have permeability of 15 m/day and 20 m/day respectively and are of equal thickness. Calculate the following:
14. Yuri wants to determine the permeability of an aquifer. The aquifer has a test well 300-mm in diameter with two observation wells. A pumping test was conducted for 24 hours with the discharge being held constant at 5618.7 m^3/day. The first one, 88.43 meters from the test well, has a draw-down of 0.52 meters. The second one, 48 meters from the test well, has a draw-down of 1.48 meters.The static water table penetrates the well to a depth of 27 meters. Determine the radius of influence of the aquifer in meters. Round off to three decimal places.
Hydrology engineering Q3. An unconfined aquifer has a thickness of 30m . A fully penetrating 20cm diameter well in this aquifer is pumped at a rate of 35 liter/ sec. . the drawdown measured in two observation wells located at distance of 10m and 100m from the well are 7.5m and 0.5m respectively .Determine the average hydraulic conductivity of the aquifer . At what distance from the well the drawdown is insignificant?
Consider the hydraulic structure shown in the figure below. In the flow net for flow through the permeable layer, the number of flow channels is Nf = 5 and the number of potential drops is Ng = 12 Calculate the seepage loss. 25 m 10 m 1.67 m 3.34 m 20 m k = 0.002 cm/sec 1.67 m 1.67 m Permeable layer | Impermeable layer Select the correct response: 7.21 m3/day/m O 2.17 m/day/m 6.28 m3/day/m O 6.82 m/day/m 11
2. An aquifer has a hydraulic conductivity of 180 ft/day, and effective porosity of 33% and is under a hydraulic gradient of 0.0004. a) Compute the Darcy velocity (also called Darcy flux). b) Compute the actual velocity (also known as the average linear velocity). c) The water temperature was 14 Degree C, and the mean pore diameter was 0.30 mm. d) Was it permissible to use Darcy's law under these circumstances? e) What is the reason for your answer?