Column Load at Grid B1 L1 L2 + L1 + L1 The floor construction in this structure comprises two way spanning slabs, supported by simply supported beams. The slabs are not continuous across the central support beam on Grid B. Ignore the self weight of the beams and columns. The ULS floor load is 14.7 kN/m2. The structure has lengths L1 = 6.1 m and L2 = 3.3 m. What is the vertical reaction from the floor at Grid B1? Give your answer in kN and to one decimal place.

Column Load at Grid B1 L1 L2 + L1 + L1 The floor construction in this structure comprises two way spanning slabs, supported by simply supported beams. The slabs are not continuous across the central support beam on Grid B. Ignore the self weight of the beams and columns. The ULS floor load is 14.7 kN/m2. The structure has lengths L1 = 6.1 m and L2 = 3.3 m. What is the vertical reaction from the floor at Grid B1? Give your answer in kN and to one decimal place.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

2-3. The steel framework is used to support the 100-mm bos reinforced lightweight concrete slab that carries a uniform me live loading of 25 kN/m2. Sketch the loading that acts alone b an members BE and FD. Set bi = 3 m, a = 2.4 m. Hint: Seei %3D Table 1-3. Solve Prob. 2–3, with b = 3.6 m, a = 1.2 m. smoio 19dmun sff A F b 1 noituloa sri 1ol bspoT supo to sdmun Ienoiibbs sil Scanned with CamScanner
A 1.6-m-long cantilever beam supports a concentrated load of P = 7.2 kN. The beam is made of a rectangular timber having a width of 120 mm and a depth of 280 mm. Calculate the shear stress due to the applied load at a point located d = 76 mm below the top surface of the beam. d 280 mm B 1.6 m 120 mm O 254 kPa O 156 kPa O 183 kPa O 204 kPa O 269 kPa Save for Later Attempts: 0 of 1 used Submit Answer
The steel framework is used to support the 100-mm reinforced stone concrete slab that carries a uniform live loading of 5 kN/m2. Sketch the loading that acts along members BE and FED. Set a = 3m, b = 5m. Hint: See Table 1.2
1. Given the values of the load L and FR-R-R dimension R, for what value of the couple M will the force in link CH be equal to 10 kN, compressive? Note that R = 2m andL = 50 kN. в м 2R- Given: (figure); R = 2m, L = 50kN Required: M so that FCH %3D 10 kN, C 7,
A simply supported wood beam that is 14.1 m long carries a 47 kN concentrated load at B. The cross-sectional dimensions of the beam are b = 160 mm, d = 360 mm, a = 70 mm, andc = 20 mm. Section a-a is located at x = 2.4 m from B. (a) At section a-a, determine the magnitude of the shear stress in the beam at point H. (b) At section a-a, determine the magnitude of the shear stress in the beam at point K. (c) Determine the maximum horizontal shear stress that occurs in the beam at any location within the entire span. (d) Determine the maximum tensile bending stress that occurs in the beam at any location within the entire length. y H a a A В K L 2L Answer: (a) TH = i kPa (b) TK = i КРа (c) Tmax = i kPa (d) Omax MPa i 13
Problem A timber beam of rectangular section is simply supported at the ends and carries a point loaa at the centre of the beam. The maximum bending stress is 12 N/mm² and maximum shearing stress is 1 N/mm², find the ratio of the span to the depth. RA W NM W B R₂ = W 2
38. A prestressed concrete beam 400 mm wide and 600mm deep has a span of 6m. The beam is prestressed with a tendon bent as shown. There is a central concentrated load of 180 kN acting on the beam. Effective prestressing force = 1200 kN. Calculate the extreme fibre stresses at mid span taking into account the self weight of the beam also. 180KN 600 mm 140mm + 400 mm 3m 3m
A simply supported wood beam that is 10.2 m long carries a 37 kN concentrated load at B. The cross-sectional dimensions of the beam are b = 145 mm, d = 350 mm, a = 85 mm, and c = 25 mm. Section a-a is located at x = 1.7 m from B. (a) At section a-a, determine the magnitude of the shear stress in the beam at point H. (b) At section a-a, determine the magnitude of the shear stress in the beam at point K. (c) Determine the maximum horizontal shear stress that occurs in the beam at any location within the entire span. (d) Determine the maximum tensile bending stress that occurs in the beam at any location within the entire length. P a H a A В K L. 2L b 3 Answer: (a) TH = i kPa (b) TK = i КРа (c) Tmax= i kPa (d) Omax = i MPа
A simply supported wood beam that is 13.8 m long carries a 30 kN concentrated load at B. The cross-sectional dimensions of the beam are b = 155 mm, d = 390 mm, a = 75 mm, and c = 40 mm. Section a-a is located at x = 2.3 m from B. (a) At section a-a, determine the magnitude of the shear stress in the beam at point H. (b) At section a-a, determine the magnitude of the shear stress in the beam at point K. (c) Determine the maximum horizontal shear stressthat occurs in the beam at any location within the entire span. (d) Determine the maximum tensile bending stress that occurs in the beam at any location within the entire length. P H а В 2L
A simply supported wood beam that is 6.6 m long carries a 34 kN concentrated load at B. The cross-sectional dimensions of the beam are b = 150 mm, d = 400 mm, a = 95 mm, andc = 45 mm. Section a-a is located at x = 1.1 m from B. (a) At section a-a, determine the magnitude of the shear stress in the beam at point H. (b) At section a-a, determine the magnitude of the shear stress in the beam at point K. (c) Determine the maximum horizontal shear stress that occurs in the beam at any location within the entire span. (d) Determine the maximum tensile bending stress that occurs in the beam at any location within the entire length. y H a d a A В K L 2L 3
A simply supported wood beam that is 9.3 m long carries a 31 kN concentrated load at B. The cross-sectional dimensions of the beam are b = 160 mm, d = 400 mm, a = 80 mm, and c = 30 mm. Section a-a is located at x = 1.6 m from B. (a) At section a-a, determine the magnitude of the shear stress in the beam at point H. (b) At section a-a, determine the magnitude of the shear stress in the beam at point K. (c) Determine the maximum horizontal shear stress that occurs in the beam at any location within the entire span. (d) Determine the maximum tensile bending stress that occurs in the beam at any location within the entire length. P y H a A a B C 2L 3 Answer: (a) TH = i kPa kPa (b) TK = i kPa (c) Tmax = i MPa (d) Omax= i
A simply supported wood beam that is 9.3 m long carries a 31 kN concentrated load at B. The cross-sectional dimensions of the beam are b = 160 mm, d = 400 mm, a = 80 mm, and c = 30 mm. Section a-a is located at x = 1.6 m from B. (a) At section a-a, determine the magnitude of the shear stress in the beam at point H. (b) At section a-a, determine the magnitude of the shear stress in the beam at point K. (c) Determine the maximum horizontal shear stress that occurs in the beam at any location within the entire span. (d) Determine the maximum tensile bending stress that occurs in the beam at any location within the entire length. a Н to A a В K 2L 3 3 Answer: kPa (a) TH = i kPa (b) TK = i kPa (c) Tmax = i MPa (d) Omax = i