Dalton Desk makes two different types children's desks: a regular model (R) and a deluxe model (D) with an extra shelf for book storage. Both types of desks go through Daltons' three production departments: fabrication, assembly, and packing/shipping, but required a different number of minutes in each department. For example, the regular desk needs 60 minutes of fabrication time, 45 minutes of assembly, and 15 minutes in packing & shipping. The deluxe model needs 120 minutes of fabrication time, 60 minutes in assembly, and 20 minutes in packing & shipping. Dalton has 850 hours of production time available in fabricating department, 450 hours available in its assembly department, and 200 hours available in its packaging and shipping department. Dalton reports unit profits of $6 and $8 for its regular and deluxe desks, respectively. What is the objective function? What is the fabrication constraint? What is the assembly constraint?What is the Shipping and Packing constraint?

Dalton Desk makes two different types children's desks: a regular model (R) and a deluxe model (D) with an extra shelf for book storage. Both types of desks go through Daltons' three production departments: fabrication, assembly, and packing/shipping, but required a different number of minutes in each department. For example, the regular desk needs 60 minutes of fabrication time, 45 minutes of assembly, and 15 minutes in packing & shipping. The deluxe model needs 120 minutes of fabrication time, 60 minutes in assembly, and 20 minutes in packing & shipping. Dalton has 850 hours of production time available in fabricating department, 450 hours available in its assembly department, and 200 hours available in its packaging and shipping department. Dalton reports unit profits of $6 and $8 for its regular and deluxe desks, respectively. What is the objective function? What is the fabrication constraint? What is the assembly constraint?What is the Shipping and Packing constraint?

Practical Management Science

6th Edition

ISBN:9781337406659

Author:WINSTON, Wayne L.

Publisher:WINSTON, Wayne L.

Chapter12: Queueing Models

Section: Chapter Questions

Problem 59P

See similar textbooks

Similar questions

A diabetic patient needs at least 40 units of Vit. A, at least 30 units of Vit. C, and atleast 30 units of Vit. E each day. Each brand X multivitamin capsule contains 4 units of Vit. A, 6 units of Vit. C, and 2 units of Vit. E; each brand Y capsule contains 5 units of Vit.A, 3 units of Vit.C, and 5 units of Vit. E. If each brand X capsule costs P6.00 and eachbrand Y capsule costs P9.00, how many capsules should the patient take each day tominimize the costs? Solve using graphical method. Show complete solution.
. Aquatica makes underwater camera housings for divers. The process begins with a solid rectangular block of aluminum that is used to make a single housing. A computer numerically controlled (CNC) machine drills into the block to make the metal “frame” of the housing. Each block requires 15 minutes of drilling. The frame is then chemically treated in a series of baths. There is ample capacity in the treating stage. Finally, a worker must manually attach the various buttons and components to the metal housing. This assembly takes 120 minutes per housing per worker and Aquatica has 6 workers trained to do this task. The CNC machine requires a 30-minute setup time before the production of a batch can begin. a. If the CNC machine produces 14 housings between setups, what would be its capacity (in housings per hour)? b. Assuming the process is supply-constrained, what is the utilization (as a number between 0 and 1) of the CNC machine if it operates in batches of 14 housings? c. Assuming…
The ClickClock corporation produces clocks with six stations. Each station is manned by a human worker, who do the following tasks: These workers get paid $ 10 an hour. Ignore any Station Task Sequence Processing Time (secs) Task Heat-stake lens to bezel Inspect bezel Clean switch holes Install set switch in bezel Total time for A Check switch travel Clean inside bezel Install module in bezel Total time for B Install battery clip in module Heat-stake battery clip in module Install two batteries in module Check switch 14 2 26 A 3 10 Preparation 1 4 18 68 23 B 6 12 Preparation 2 7 25 60 8 20 9 20 Battery 10 22 Installation 11 8. Total time for C 70 Install band Inspect band Total time for D Cosmetic inspection Final test D 12 45 Band 13 13 Installation 58 E 14 4 Packaging 15 71 Preparation Total time for E 75 Place watch and cuff in display box Place cover in display box base 16 20 17 14 Watch 18 Place owner's manual and box into tub 30 packaging Total time for F 64
The magnetic resonance imaging (MRI) unit of St Francis hospital has 2 MRI machines and sees two kinds of patients, “regular” patients and “contrast” patients. The regular patients don’t need any special preparation before imaging but the contrast patients receive an injection of “dye” that enables the physicians to see the images more clearly. Regular patients require 15 minutes in an MRI machine whereas contrast patients take on average 25 minutes in an MRI machine. Over an 8-hour day, the MRI unit receives an average of 25 regular patients and 5 contrast patients. Convert the demand and capacity into "hours of work per day" to answer the following questions: (a) What is the implied utilization (as a %) of the MRI unit? % (Round your answer to whole number) Hint: First calculate the demand in hours of work per day: If there are 5 Contrast patients per day and each Contrast patient takes 25 minutes to 'process', how many 'minutes of work' are demanded every day from…
The magnetic resonance imaging (MRI) unit of St Francis hospital has 2 MRI machines and sees two kinds of patients, "regular" patients and "contrast" patients. The regular patients don't need any special preparation before imaging but the contrast patients receive an injection of "dye" that enables the physicians to see the images more clearly. Regular patients require 15 minutes in an MRI machine whereas contrast patients take on average 25 minutes in an MRI machine. Over an 8-hour day, the MRI unit receives an average of 25 regular patients and 5 contrast patients. (a) What is the implied utilization (as a %) of the MRI unit? % (b) What are the actual and maximum flow rates through the MRI (patients per day)? regular contrast Actual flow rates Max flow rates.
Lead Time Gourmet Helper Appliance Company manufactures home kitchen appliances. The manufacturing process includes stamping, final assembly, testing and shipping. In the stamping operation, a number of individuals are responsible for stamping the steel outer surface of the appliance. The stamping operation is set up prior to each run. A run of 75 stamping is completed after each setup. A setup requires 40 minutes the parts wait for the setup to be completed before stamping begins. Each stamping requires 5 minutes of operating time. After each batch is completed, the operator moves stamp the stamped covers to the final assembly area. This move takes 10 minutes to complete. The final assembly for each appliance unit requires 18 minutes and is also done in batches of 75 appliance units. The batch of 75 appliance units is moved into the test building, which is crossed street. The move takes 25 minutes. In the final test, the 75 unit batch is tested one at a time. Each test…
A diabetic patient needs at least 40 units of Vit. A, at least 30 units of Vit. C, and at least 40 units 30 units of Vit. E each day. Each brand X multivitamin capsule contains 4 units of Vit. A, 6 units of Vit. C, and 2 units of Vit. E; each brand Y capsule contains 5 units of Vit. A, 3 units of Vit.C, and 5 units of Vit. E. If each brand X capsule costs P6.00 and each brand Y capsule costs P9.00, how many capsules should the patient take each day to minimize the costs?
A Company produces a component for use in the aerospace industry. The component consists of three parts (A, B and C), which are purchased externally and cost 50c, 60c and 70c per piece respectively. Parts A and B are assembled first on assembly line 1, which produces 150 components per hour. Part C undergoes a drilling operation before being finally assembled with the output from assembly line 1. There are six drilling machines in total, but only three are currently operational. Each drilling machine drills part C at a rate of 30 parts per hour. The final assembly line has a production capacity of 100 components per hour. At present, components are produced eight hours a day, five days a week. If the need arises, management can add a second shift of eight hours for the assembly lines only. The cost of assembly labour is 40c per assembly operation for each assembly line; the cost of drilling labour is 20c per part. For drilling, the cost of electricity is 10c per part. The overhead cost…
Sawing 20 min/unit Sanding 20 min/unit Drilling 32 min/unit Welding 30 min/unit Assembly 93 min/unit Assembly 93 min/unit Assembly 93 min/unit A production process is shown in the figure above. The drilling operation occurs separately from, and simultaneously with the sawing and sanding operations. Welding starts when both drilling and sanding operations have been completed. After welding, a product needs to go through only one of the three assembly operations (the operations are in parallel, where parallel lines perform the exact same operation). Considering the process times at stations, what is the process time of the system (in min/unit)?
Two vital stages in a production process are assembly I and assembly II. The unit load for the assembly I stage is 7.0 ( 50% higher for high skill) minutes, while it is 10.0 (30 % higher for high skill) minutes for assembly II. There are 7 employees working in assembly I and 8 employees working in assembly II. 65% of low skill labor and 35% of high skill labor are required at both stages. . On average 18% of the operating time is wasted, what's the theoretical unit load for Assembly II? answer is 9.06 please explain
A production process at Kenneth Day Manufacturing is shown in the figure below. The drilling operation occurs separately from, and simultaneously with, the sawing and sanding, which are independent sequential operations. A product needs to go through only one of the three assembly operations (the operations are in parallel). 7 units/hr 5 units/hr Assembly 0.8 units/hr Sawing Sanding Welding Assembly 2.1 units/hr 0.8 units/hr Drilling 2.5 units/hr Assembly 0.8 units/hr a) is the bottleneck. b) The bottleneck time is minutes per unit (round your response to two decimal places). c) The throughput time of the overall system is minutes (round your response to two decimal places).
What is OEE and also calculate the OEE from the given data in below table Items Data Shift Length 8 Hours Breaks (2) 15 minute and (1) 30 minute Downtime 47 minutes ideal Cycle Time 1.0 seconds Total Count 19,271 widgets Reject Count 423 widgets