Need it asap please In shown figure the aluminum is subjected to a thermal stress where T₁ is 15.786 deg. C and T2 is 111.175 deg. C. Determine the required diameter (mm) of the steel rods tolimit the expansion of the aluminum just 3.078 mm if the thermal coefficient of aluminum is 23.589 x10.SPEELH₂H₂ H₁3ALUMINUMWhereH1-2,000.815 mmH2-2,044.122 mmH3-1.999.975 mm)A-17,483 mm²E-70.984 GPaEst-202.760 GPa

Given Data The thermal coefficient of aluminum is:α=23.589×10-6 The area of aluminum is:\AAl=17.482…

In shown figure the aluminum is subjected to a thermal stress where T₁ is 15.786 deg. C and T2 is 111.175 deg. C. Determine the required diameter (mm) of the steel rods limit the expansion of the aluminum just 3.078 mm if the thermal coefficient of aluminum is 23.589 x10. SICEL

In shown figure the aluminum is subjected to a thermal stress where T₁ is 15.786 deg. C and T2 is 111.175 deg. C. Determine the required diameter (mm) of the steel rods limit the expansion of the aluminum just 3.078 mm if the thermal coefficient of aluminum is 23.589 x10. SICEL

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter2: Steady Heat Conduction

Section: Chapter Questions

Problem 2.24P

See similar textbooks

Similar questions

I want to know how much heat the tube lost due to the material it is made of aluminum or steel. Even if it is a small difference in temperature. I want to know which material Conduct Heat the Best through this problem. material: Aluminum, steel ( the dimensions are the same for both) temperature touching cylinder: 65 Celcius temeprature inside cylinder 64.5 celsius room temperature 24 celcius Tube measurements outer radius r1 r1 = 4 in inner radius r2 r2 = 3 in outer circumference C1 C1 = 25.132741228718 in inner circumference C2 C2 = 18.849555921539 in height h = 8 in wall thickness t = 1 in
A 20 m steel rod is heated from 260C to 460C. Find the total elongationof the rod if coefficient of the thermal expansion of steel is 11.5 x 10-6m/m-0C.A. 4.60 mm C. 6.78 mmB. 2.34 mm D. 7.34 mm
QUESTION 22 Using the Wickström equation, determine the temperature you can expect reinforced steel to be if it is in a 300mm by 300mm concrete beam and is 30mm deep in to the concrete on the heated side. The beam is being heated by the ASTM E119 aurve on one side. Find the temperature of the reinforcing steel at 1.3 hours. O 565°C O 453°C O 718°C O -298.96°C
www.VII He is acheveu by the survey 15.17 A pipe in a spacecraft, made of AISI 310 stainless steel, is near the rocket engine, causing it to be subjected to temperatures as high as 950°C. The stress applied to the pipe in actual service is expected to be 10 MPa. (a) How long would you allow the pipe to be subjected to the given temperature and stress if a safety factor of 10 on life is required? (b) What safety factor on stress is achieved by the safety factor of 10 on life? Does the resulting safety factor on stress seem reasonable and adequate?
A 20 m steel rod is heated from 26°C to 46°C. Find the total elongation of the rod if coefficient of the thermal expansion of steel is 11.5 x 10-6 m/m-°C. A. 4.60 mm B. 2.34 mm C. 6.78 mm D. 7.34 mm
ssroom - Yahoo Search X A MENG360 Midterm Exam Tn MENG360-Midterm exam A ols.liu.edu.lb/mod/quiz/attempt.php?attempt3D198929&cmid%3D11801 A Dashboard E Events E My Courses This course EShow b OP=314 N Let's consider a rod having a solid circular cross-section with diameter of 6 mm and it is made of a material having a Young's modulus E = 200 Gpa and a Poisson's ratio of 0.3. If a tensile force F is subjected to that rod cross-section, the diameter becomes 5.998 mm. determine the applied force F. Select one: OF= 15708N O F= 6283 N OF = 13090N O F= 4189 N OF=5236 N OF= 10472 N Finish attem US ACTIVITY 0 Test - Spring 2020-2021 Jump to... re to search 97% 10:42 ENG 4/15/2
Question 1 A copper tube that experience a temperature change is placed between two rigid caps. Four steel bolts are symmetrically arranged parallel to the axis of the tube and are lightly fastened. The copper has a cross-sectional area, length, Young's modulus and coefficient of expansion of 2000 mm², 300 mm, 100 GPa and 16 x 10-6 /°C respectively. The steel has a diameter, Young's modulus and coefficient of expansi on of 22 mm, 200 GPa and 12 x 10-6/°C respectively. Find the stress in the tube if the temperature of the assembly is raised by 70°C 1.1 1.2 What load will each bolt carry at the raised temperature
2. The 40mm diameter steel rod AB shown in Figure 2 is resting on frictionless rollers between two steel plates. End A is just touching the left hand steel plate. Steel plate Steel plate А 1500mm Imm Figure 2 There is a gap of 1mm between the end B and the right hand side steel plate. The temperature of the rod increases by an amount AT and this increase in temperature causes the two ends of the rod to press against the steel plates. This action causes the right hand steel plate to move to the right by 0.5mm while the left hand plate does not move. The Young's modulus value for steel is 210,00ON/mm?. Taking any assumptions that you deem necessary calculate the increase in temperature AT required to cause the rod to buckle.
Question 1 A copper tube that experience a temperature change is placed between two rigid caps. Four steel bolts are symmetrically arranged parallel to the axis of the tube and are lightly fastened. The copper has a cross-sectional area, length, Young's modulus and coefficient of expansion of 2000 mm², 300 mm, 100 GPa and 16 × 10-6/°C respectively. The steel has a diameter, Young's modulus and coefficient of expansi on of 22 mm, 200 GPa and 12 x 10-6/°C respectively. 1.1 Find the stress in the tube if the temperature of the assembly is raised by 70°C
The steel rails of a railroad track are laid in the winter at a temperature of 15 degrees fahrenheit with gaps of 0.01 feet between the ends of the rails. Each rail is 33 feet long. At what temperature will the rails touch end to end? What stress will result in the rails if the temperature rises to 110 degrees fahrenheit? Answer: 9,434.1 psi. I'm not sure how to come up with this answer. Could you help me work this problem out step by step please?
A 20-ft steel rod under a fixed support has an initial temperature40°F. Up to what temperature must the rod be heated if theallowable thermal stress developed in the rod is 80 ksi. Themodulus of elasticity for steel is 29 x 106 psi and coefficient ofthermal expansion of steel is a = 6.5 x 10-6 Answers: Tf = ___________________
Please answer the question with steps An unknown material bar having length of 4.3m has 1m cross sectional area. One end is in contact with 373K Thermal conductivity of the material is 197W/mK. The total rate of heat flow is Joules/second. ....... .... (Calculate up to one decimal point accuracy).