In Triaxial test, which of the following parameters do not need to be recorded the confining pressure specimen diameter changes ) the generated pore pressure the axial force A Triaxial test was performed on a dry, cohesionless soil. If the sample failed vhen the minor principal stress was half of the major principal stress, the soil's angle of internal friction is: O 22.5 19.5 33.3 O 25 A technician obtained a soil void ratio of 1.5. It is okay because it is possible to measure void ratio values above 1. True False |

In Triaxial test, which of the following parameters do not need to be recorded the confining pressure specimen diameter changes ) the generated pore pressure the axial force A Triaxial test was performed on a dry, cohesionless soil. If the sample failed vhen the minor principal stress was half of the major principal stress, the soil's angle of internal friction is: O 22.5 19.5 33.3 O 25 A technician obtained a soil void ratio of 1.5. It is okay because it is possible to measure void ratio values above 1. True False |

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter12: Shear Strength Of Soil

Section: Chapter Questions

Problem 12.13P

See similar textbooks

Similar questions

In a tri-axial test of silty soil, the sample failed at normal stresses of 521 kPa and a shear stress of 200 kPa. Compute the maximum failure stress. a. 781 kPa b. 510 kPa c. 838 kPa d. 812 kPa
: In a tri-axial test of a silty soil, the sample failed at normal stress of 475 kPa and a shear stress of 350 kPa. Which of the following gives the angle of internal friction? Compute the angle that the failure plane makes with the x-axis. Compute the maximum failure stress.
In a tri –axial test of a silty soil, the sample failed at normal stress of 475 kPa and a shear stress of 350 kPa.1. Which of the following gives the angle of internal friction? a. 36.4 degreesb. 46.3 degreesc. 39.3 degreesd. 26.3 degrees2. Find the angle that the failure plane makes with the x-axis.a. 36.3 degreesb. 63.2 degreesc. 69.3 degreesd. 76.3 degrees3. Find the maximum failure stress. a. 1280.72 kPab. 1210.72 kPac. 1169.41 kPad. 1250.72 kPa
A dilatometer test was conducted in a clay deposit. The groundwater table was locatedat a depth of 3 m below the surface. At a depth of 8 m below the surface, the contact pressure spod was 280 kN/m2 and the expansion stress sp1d was 350 kN/m2. Determinethe following:a. Coefficient of at-rest earth pressure, Kob. Overconsolidation ratio, OCRc. Modulus of elasticity, EsAssume s 9o at a depth of 8 m to be 95 kN/m2 and ms 5 0.35.
An undisturbed soil sample, 100 mm in diameter and 200 mm high was tested in a tri-axial machine. The sample failed at an additional axial load of 3 kN with a vertical deformation of 20 mm. The failure plane was inclined at 50 deg. to the horizontal and the cell pressure was 300 kPa. a.) Determine the angle of internal friction. b.) Determine the deviator stress in kPa. c.)Determine the cohesion of the soil in kPa.
A direct shear test was conducted on a dried sand sample in a test box of 60mm x 60mm normal load of 400N. The soil sample failed at an applied shear force of 250N. a. Determine the shear strength parameters of the soil. b. Estimate the required shear force to cause a shear failure under a normal load of 600N. (Show all working calculations.)
Problem 2: The following data were obtained in a direct shear test. ... 20 kPa Normal pressure .... Tangential Pressure Cohesion of soil 15 kPa 8 kPa Determine the following: a) Angle of internal friction, ø b) Compute the angle that the failure plane makes with the horizontal, 0. c) Compute the minimum principal stress. d) Compute the max. principal stress
Question 3 The results of two consolidated-drained test triaxial tests on a clay are given below: Specimen No. Chamber Pressure Deviator Stress 220 400 105 II 210 1. Determine the angle of internal friction. 2. Determine the cohesion of the clay. 3. Determine the normal stress on the point on the failure plane of the 2"d specimen. O Question 1: A. 26.744 O Question 1: B. 26.042 O Question 1: C. 27.871 O Question 1: D. 27.486 O Question 2: A. 10.737 O Question 2: B. 12.141 O Question 2: C. 17.372 O Question 2: D. 14.836 O Question 3: A. 317.694 O Question 3: B. 232.575 O Question 3: C. 230.306 O Question 3: D. 322.194 O O O O O O O CO
A normally consolidated soil was subjected to tri-axial test with the following data: cell pressure= 320 kPa; The specimen failed when the deviator stress is 460 kPa. Compute the shear stress in kPa on the failure plane. a.550 b.141.42 c.208.9 d.119.03
Two undrained triaxial tests were conducted on soil specimen, and they gave the following results: Sample Confining Pressure Deviator Stress A 350 kN/m² B 500 kN/m² 150 kN/m² 300 kN/m² The shear strength of sample A in the plane of it's normal stress is A 588 kPa B 283 kPa C 730 kPa D 165 kPa Correct Option
Answer any one asap 1.A triaxial test is performed on a normally consolidated clay. The sample is further consolidated by the test of all-around confining pressure prior to the application of the axial load. The axial force is applied very slowly. The equipment pore pressure lines remain open so that drainage of the soil pore water can occur during the test. The sample fails when minor principal stress is 49 kPa and the major principal stress is 91 kPa. Determine the angle of internal friction with no decimal places. 2.A dry sand sample was tested in direct shear and yielded a shear strength of 132 kPa under a normal stress of 215 kPa. Lab results indicate the soil's wet unit weight is 18.1 kN/m3 and the saturated unit weight is 20.2 kN/m3. Determine the shear strength, in kPa, within the native sand deposit at a depth of 2.5 m below the water table. The water table is 3 m below ground surface. Provide your answer with 2 decimal places, do not include the units and assume a unit…
Direct shear test was conducted on soil specimen. It was observed that the specimen failed when V = 137KPa and P = 268KPa. In other soil sample, it failed at V = 210KPa and P = 412KPa. Determine the cohesion of the soil? Determine the internal angle of friction? What is the axial compressive stress when V = 243KPa