The hanger consists of three 2014-T6 aluminum alloy rods, rigid beams AC and BD, and a spring. If the hook supports a load of P = 60 kN, determine the vertical displacement of F. Rods AB and CD each have a diameter of 10 mm, and rod EF has a diameter of 15 mm. The spring has a stiffness of k = 100 MN/m and is unstretched when P = 0. Problem 2: The hanger consists of three 2014-T6 aluminum alloy rods, rigid beams AC and BD, and a spring.If the hook supports a load of P = 60 kN, determine the vertical displacement of F. Rods AB and CD each havea diameter of 10 mm, and rod EF has a diameter of 15 mm. The spring has a stiffness of k = 100 MN/m and isunstretched when P = 0.450 mm450 mm

Answered: Image /qna-images/answer/68d1d775-fb83-49ab-80bd-7c805f93a892.jpg

Problem 2: The hanger consists of three 2014-T6 aluminum alloy rods, rigid beams AC and BD, and a spring. If the hook supports a load of P = 60 kN, determine the vertical displacement of F. Rods AB and CD each have a diameter of 10 mm, and rod EF has a diameter of 15 mm. The spring has a stiffness of k = 100 MN/m and is unstretched when P = 0. 450 mm E D 450 mm

Problem 2: The hanger consists of three 2014-T6 aluminum alloy rods, rigid beams AC and BD, and a spring. If the hook supports a load of P = 60 kN, determine the vertical displacement of F. Rods AB and CD each have a diameter of 10 mm, and rod EF has a diameter of 15 mm. The spring has a stiffness of k = 100 MN/m and is unstretched when P = 0. 450 mm E D 450 mm

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter11: Columns

Section: Chapter Questions

Problem 11.4.2P: A cantilever aluminum column has a square tube cross section with an outer dimension of 150 mm. The...

See similar textbooks

Similar questions

25 KN Using the method that has been covered, find the displacement of the node 2 if E1 = 100 GPa and A1=10-6 m² and E2= 200 GPa and A2=2x10 6 m². N2 5 cm 2 30° N3 N1, Note: The stiffness matrix of individual elements should be first written, then the equilibrium equations at each node should be written, expanded in terms of nodal displacement, and used to perform the assembly of the global stiffness matrix of the problem. Then, the appropriate boundary conditions should be applied and the nodal displacement vector should be found. Every step should be shown; missing any step would result in point deduction even if the final answer is correct
The bridge construction company Z is facing problems with the mechanism of the crane, which it uses to lift the beams of the bridges. We have been informed that the bars are made of UNSG 10100 HR steel (Sy= 26x10^3psi, E= 30x10^6psi) and it is required that you determine the maximum weight that the system can support in order to identify what the problem is.
The helical compression spring is made of 12mm wire diameter with 132 mm mean diameter. Determine stiffness of the spring when modulus of rigidity G=80 kN/mm2,number of turn is 13 and axial load is 190N.
5. This bar is made of AISI 1006 cold-drawn steel (Sy = 280 MPa) and is loaded by the forces F = 0.45 kN, P = 6.0 kN, and T = 30 N-m. Determine the maximum length L of the bar that can be used without exceeding a static factor of safety of 2 for the entire bar (Based on the maximum shear stress theory). You need to find the most critical position. 100 mm 15-mm D.
If load P = 22.1 kips, determine the normal force in bar (1).
The linkage is made using two A-36 steel rods, each having a circular cross section. Determine the diameter of each rod to the nearest 1 8 in. that will support the 900-lb load. Assume that the rods are pin connected at their ends. Use a factor of safety with respect to buckling of F.S. = 1.8.
The pin-connected assembly consists of aluminum rods (1) and (2) and steel rod (3). The aluminum rods each have a diameter of 14 mm and an elastic modulus of E = 70 GPa. The steel rod has a diameter of 15 mm and an elastic modulus of E= 180 GPa. Assume a = 3.0 m, b = 1.6 m, and c = 1.0 m. What is the magnitude of load P that is necessary to displace point A 7mm to the left? A Answer: P = i (3) eTextbook and Media Save for Later B b D kN Attempts: 0 of 5 used Submit Answer
The pin-connected assembly consists of aluminum rods (1) and (2) and steel rod (3). The aluminum rods each have a diameter of 14 mm and an elastic modulus of E = 70 GPa. The steel rod has a diameter of 15 mm and an elastic modulus of E= 180 GPa. Assume a = 3.0 m, b = 1.6 m, and c = 1.0 m. What is the magnitude of load P that is necessary to displace point A 7 mm to the left? A Answer: P = i (3) eTextbook and Media Save for Later B b D kN Attempts: 0 of 5 used Submit Answer
The pin-connected assembly consists of aluminum rods (1) and (2) and steel rod (3). The aluminum rods each have a diameter of 18 mm and an elastic modulus of E = 71 GPa. The steel rod has a diameter of 16 mm and an elastic modulus of E = 200 GPa. Assume a = 3.5 m, b = 1.4 m, and c = 1.1 m. What is the magnitude of load P that is necessary to displace point A 13 mm to the left? B Answer: P = i KN
The bell-crank mechanism is in equilibrium for an applied load of P = 24 kN. Assume that a = 300 mm, b = 235 mm, and θ = 55°. The pin at B has a diameter of d = 22 mm, and the bell crank has a thickness of t = 7 mm. Calculate the bearing stress in the bell crank at pin B.
The pin-connected assembly consists of aluminum rods (1) and (2) and steel rod (3). The aluminum rods each have a diameter of 14 mm and an elastic modulus of E= 65 GPa. The steel rod has a diameter of 18 mm and an elastic modulus of E= 215 GPa. Assume a = 3.2 m, b = 1.3 m, and c = 1.4 m. What is the magnitude of load P that is necessary to displace point A 10 mm to the left? (1) (3) A 4 Answer: P = i B (2) D KN
load of 12 kN is raised by means of a screw jack. The mean diameter of the square threaded screw is 48 mm and the pitch is 12 mm. A force of 180 N is applied at the end of a lever to raise the load. Determine the length of the lever to be used and the mechanical advantage obtained. the screw self-locking? Take µ = 0.12.