i need the answer quickly A Carnot refrigeration cycle absorbs heat at -8°C and rejectsQIheat at 55°C. (a) If the heat rejection rate is 30 kW, calculate the heatcxtraction ratc, the work input, and the COP of the rcfrigeration cycle.(b) If the cycle operates as a heat pump calculate the COP of the cyclc.[Answers: (a) 24.24 kW, 5.76 kW, 4.2, (b) 5.2|

Answered: Image /qna-images/answer/fdebb0c8-24bc-4bc7-9a8d-f77cbacd76a6.jpg

Q1 A Carnot refrigeration cycle absorbs heat at -8°C and rejects heat at 55°C. (a) If the heat rejection rate is 30 kW, calculate the heat extraction rate, the work input, and the COP of the refrigeration cycle. (b) If the cycle operates as a heat pump calculate the COP of the cycle. [Answers: (a) 24.24 kW, 5.76 kW, 4.2, (b) 5.21

Q1 A Carnot refrigeration cycle absorbs heat at -8°C and rejects heat at 55°C. (a) If the heat rejection rate is 30 kW, calculate the heat extraction rate, the work input, and the COP of the refrigeration cycle. (b) If the cycle operates as a heat pump calculate the COP of the cycle. [Answers: (a) 24.24 kW, 5.76 kW, 4.2, (b) 5.21

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter44: Geothermal Heat Pumps

Section: Chapter Questions

Problem 13RQ: If 14 gpm of water is flowing through an open-loop heat pump with a temperature difference of 7F,...

See similar textbooks

Similar questions

01. A refrigerant 22 system having a refrigerating capacity of 55 kW operates with an evaporating temperature of 5°C and rejects heat to water cooled condenser. The compressor is hermetically sealed. The condenser has a U value of 450 W/m².K and a heat-transfer area of 18 m? and receives a flow rate of cooling water of 3.2 kg/s at a temperature of 30°C. What is the condensing temperature?
1. The heat absorption and rejection temperatures of a Carnot refrigeration cycle are -8°C and 36°C, respectively. The rate of heat absorption is 28 kW.A. Calculate the COP of the refrigeration cycle. B. Calculate the power input to the cycle in kW. C. If a Carnot heat pump operating between the same temperatures absorb 18 kW from the cold region, calculate the rate of heat supply to the hot region in kW. D. Calculate the COP of the heat pump.
Reinneil Law-ay Active Now 7. (a) Compute the possible maximum efficiency of a heat engine operating between the temperature limits of 147*C and 698*C. (b) A refrigerator has COP of 6. How much work must be supplied to the refrigerator in order to remove 45 cal of heat from its interion? •.. More Edit II
A Carnot refrigeration cycle absorbs heat at 250 K and rejects it at 300 K Calculate- i) the coefficient of performance of this refrigeration cycle. ii) If the cycle is absorbing 1130 kJ/min at 270 K. how many kJ of work is required per second iii) If the Carnot heat pump operates between the same temperatures as the above refrigeration cycle, what is the coefficient of performance ?
Pls. Answer thank you! A logging firm in Isabella operates a Diesel Electric Plant to supply its electric energy requirements. During a 2 hour period, the plant consumed 250 gallons of fuel at 80°F and produced 2900 kW-hrs. Industrial fuel is used at 30°API and was purchased at P30/li at 60°F. Determine the overall thermal efficiency in percent of the plant.
3.) When a gas surrounded by air is compressed or expands adiabatically, its temperature rises or decreased even though there is no heat input or dissipated to the gas. Where does the energy come from to raise or lower the temperature? 4.) Why must a room air conditioner be placed in a window rather than just set on the floor and plugged in? Why can a refrigerator be set on the floor and plugged in?
1. A steam turbine system has a boiler pressure of 40 bar and the emergent steam is superheated to 500°C. The condenser pressure is 0.04 bar. If the expansion and compression stages have ideal efficiency, (i) What is the thermal efficiency, dryness fraction and specific steam consumption of the cycle considered, If the cycle is having one reheat stage to the superheat temperature? What is the thermal efficiency, dryness fraction and specific steam consumption of the cycle considered, if the cycle is having one bleed point (open heater) at the pressure where the steam become saturated after first expansion? (ii)
1 Photos , 1/1 12:53 PM O O 18% O . A cold store maintains storage air temperature of minus 23°C in an ambient temperature of 27°C. The plant has evaporating and condensing temperature of minus 30°C and 40°C and consumes 2kW of power. Assuming the refrigeration plant possess a Carnot efficiency of 50%, what is the cooling load of the store. List 2 advantages in the sub-cooling of condensate in the condenser. What is the purpose of introducing an inert gas in the low side of the Munthers-Platen absorption refrigerator?
A power plant was analysed based on Carnot cycle, the evaporator supplie 442 kJ of heat per cycle at 512°C and condenser cooling fluid was maintained at 36°C. (a).Determine the amount of heat rejected in the condenser? Provide answer to no decimal place and insert the unit symbol in kilo.... 1 °C is 273K in this question if required.
A refrigerant 22 refrigerating system is operating with a condenser temperature of 42°C and an evaporating temperature of 0°C. (a) If the liquid line from the condenser is soldered to the suction line from the evaporator to form a simple heat exchanger and if as a result of this the saturated vapor leaving the evaporator is superheated 10 degrees, how many degrees will the saturated liquid leaving the condenser be subcooled? Determine (b) the volume flow rate, and (c) the compressor work.
During an average year of operation, the heat pump described in Part (a) above provides 15kW of heat to the house while using a total of 4.29kW of electricity. Using this information, calculate the Coefficient of Performance of the heat pump? A deep retrofit is beihg carried out on a domestic dwelling house to achieve an “A" Building Energ Rating. As part of this retrofit, an air-source heat pump is being installed. Using a detailed diagram describe the operation of an air source heat pump, showing the various components, identifying the working fluid, and how the heat is transferred.
In a cyclic comprising of air compressor and expansion, workdone by a prism during the compression stroke is 9.2KJ and the heat rejected to the surrounding is 50KJ. During the expansion stroke workdone by air on the prism is 8.4KJ. a) Determine the quality of heat transferred to or from the system. Tullow oil has discovered a large volume of crude deposit at Cape-3-Point along the western coast of Ghana after years of intensive exploration. In the Company’s bid to start exploration, Green Ghana an environmental protection NGO took Tullow to court to prevent the Company from embarking on the said project citing numerous environmental concerns. b) As an energy and sustainability expert, what do you think are the side effects of the project and their remedies? A cooling water pump is operating at a speed of 1800rpm. Its flow rate is 1800L/minutes at a head of 14.4m and the power of the pump is 45kw. c) Determine the power required if the pump speed is increased…