Q5-A proposed earth dam requires 7500 m³ of compacted soil with relative density of 94%, maximum void ratio of 0.73, minimum void ratio of 0.4 and specific gravity (Gs)= 2.67. Two borrow pits are available as described in the following table. Choose the best borrow pit with a minimum cost. Borrow Pit A B Degree of saturation % 82 100 Moisture content % 18.43 24.34 Cost ($/m³) 10 5

Q5-A proposed earth dam requires 7500 m³ of compacted soil with relative density of 94%, maximum void ratio of 0.73, minimum void ratio of 0.4 and specific gravity (Gs)= 2.67. Two borrow pits are available as described in the following table. Choose the best borrow pit with a minimum cost. Borrow Pit A B Degree of saturation % 82 100 Moisture content % 18.43 24.34 Cost ($/m³) 10 5

Principles of Foundation Engineering (MindTap Course List)

8th Edition

ISBN:9781305081550

Author:Braja M. Das

Publisher:Braja M. Das

Chapter16: Soil Improvement And Ground Modification

Section: Chapter Questions

Problem 16.12P

See similar textbooks

Similar questions

= Construction of an embankment needs 400,000 yd3 of fill. The fill should be compacted to at least 88% of the standard Proctor maximum dry density obtained in the lab, which is gammad_d,max : 128 pcf, but the contractor plans to exceed that by 2% to ensure passing quality control. The fill may be obtained from two companies (A and B) with the following profiles. Company A Distance from borrow pit to embankment: 25 miles Cost of haul ($/yd3-mile): 0.50 Cost of fill material ($/yd3): 1.50 Borrow soil moisture content: 16% Specific gravity of solids: 2.70 Degree of saturation: 70% Company B Distance from borrow pit to embankment: 30 miles Cost of haul ($/yd3-mile): 0.40 Cost of fill material ($/yd3): 1.40 Borrow soil moisture content: 18% Specific gravity of solids: 2.65 Degree of saturation: 58% The total cost of haulage by company A (million $) The total cost of haulage by company B (million $) The relative compaction, CR, should account for the contractor's plan to exceed the minimum…
Q: A proposed earth dam requires 7500 m of compacted soil with relative density of 94% , maximum void ratio of 0.73, minimum void ratio of 0.4 and specific gravity (Gs) = 2.67. Two borrow pits are available as described in the following table. Choose the best borrow pit with minimum cost. Cost ($/m) Degree of saturation (%) 82 Borrow Pit Water content (%) A 18.43 10 B 100 24.34
30. The proposed embankment fill requires 8000m³of compacted soil. The void ratio of the compacted fill is specified as 0.70. Four borrow pits are available as described in the following table, which list the respective void ratios of the soil and the cost per cubic meter for moving the soil to the proposed construction site. Assume that the specific gravity is the same at all pits, which among the pits should be bought to minimize the cost? Borrow Pit Void Ratio Cost (P/m³) A 0.82 400 B 0.9 450 1.1 250 D 0.78 600
Your company has won a contract to provide and compact the fill material for an earth levee, with the dimensions shown below. The levee fill is a silty clay soil to be compacted to at least 95% of maximum Standard Proctor of ya = 106 pcf at an OMC of 18%. Your borrow pit has a silty clay with an in-situ moist density of 112.1 pcf at 18%, and a G, = 2.68. When the soil is excavated and loaded on to your trucks, the voids ratio of the material is e = 1.47. Your trucks can haul 15 cubic yards of material per trip. (26) Determine the volume of fill required for the levee; (27) Determine the volume required from the borrow pit; (28) Determine the required number of truckloads. 40* 20 -20 20 450 60' 3:1
Your company has won a contract to provide and compact the fill material for an earth levee, with the dimensions shown below. The levee fill is a silty clay to be compacted at least 95% of maximum Standard Proctor of dry unit weight of 106 kN/m³ at an optimum moisture content of 18%. Yours borrow pit has a silty clay with an in-situ density of 112.1 pcf at 18%, and a specific gravity of 2.68. When the soil is excavated and loaded on to your trucks, the void ratio of the material is e = 1.47. Your trucks cam haul 15 cubic yards of material per trip. a -) Determine the volume of fill required for the leave, b -) Determine the volume required from the borrow pit 20 ft 3:1 20 ft 60 ft 20 ft 40 ft 2:1
Q2/ For proposed Earth Dam fill, the soil will be compact to (95%) of standard proctor dry density. The test of borrow area indicate that (ydmax. = 18 kN/m²) at optimum moisture content (11%). The soil of borrow area at natural condition has (e = 0.65) and (Gs 2.68). Determine the minimum volume ofborrow required to make (600,000 m³ ) of acceptable compacted fill. %3| %3D
A fill of volume 150000 cum is to be made of void ratio 0.8. The void ratio of borrow pit soil is 1.4. Find volume to be extracted.
A proposed earth dam requires a 25000 m^3 of compacted soil with relative density of 97.54%, maximum void ratio of 0.20, minimum void ratio of 0.10 and specific gravity of 2.40. Two borrow pits are available as described in the following table. By how much is the better option more economical to the other one? Degree of Saturation (%) Moisture Borrow Pit Content (%) Cost (P) A 74 18 250 В 82 16 275
GEOTECHNICAL ENGINEERING: The Undisturbed soil at a given borrow pit is found to have the following parameters. The water content is 15%, the void ratio is 0.60 and the specific gravity of the solids is 2.70. The soil from this borrow pit is to be used to construct a rolled fill having a finished volume of 50,000 yd3 . The soil is excavated by means of a shovel and dumped on trucks. When loaded to capacity these trucks are found to contain, on average, a net weight of wet soil equal to 13,000 lbs. In the construction process, the trucks dump their load on the fill, the material is spread and broken up, after which a sprinkler adds water until the water content is equal to 18%. The soil and water are thoroughly mixed by means of dicers (or other similar equipment) and then compacted until the dry unit weight γd=110 lbs/ft3. Helpful Conversions (3ft=1yd), (γw=62.4 lbs/ft3), (7.48gal/1ft3 ) a) If the fill should become saturated at some time subsequent to construction and does not change…
4. Specifications require that a fill using borrow soil to be compacted at 95% of its standard proctor maximum dry density. Tests indicate that this maxi- mum is 19.5 kilo Newtons per cubic meter with 12 % moisture. The borrow material has a void ratio of 0.60. Compute the minimum dry and wet unit weight of the compacted soil, compute also the minimum volume of borrow material required to fill 1 cubic meter when compacted. Note: Assume a logical value of Gs with at least 4 significant figures.
GEOTECHNICAL ENGINEERING: The Undisturbed soil at a given borrow pit is found to have the following parameters. The water content is 15%, the void ratio is 0.60 and the specific gravity of the solids is 2.70. The soil from this borrow pit is to be used to construct a rolled fill having a finished volume of 50,000 yd3 . The soil is excavated by means of a shovel and dumped on trucks. When loaded to capacity these trucks are found to contain, on average, a net weight of wet soil equal to 13,000 lbs. In the construction process, the trucks dump their load on the fill, the material is spread and broken up, after which a sprinkler adds water until the water content is equal to 18%. The soil and water are thoroughly mixed by means of dicers (or other similar equipment) and then compacted until the dry unit weight γd=110 lbs/ft3. Helpful Conversions (3ft=1yd), (γw=62.4 lbs/ft3), (7.48gal/1ft3 ) a) Assuming that each load is a capacity load, how many truck loads are required to construct the…
1. A proposed earth dam requires 4500 m³ of compacted soil with a void ratio, e = 0.47 and specific gravity (Gs)=2.76. Two borrow pits are available as described in the following table. Choose the best borrow pit with minimum cost. Borrow Pit A B Degree of Saturation % 92 96 Moisture Content% 20.43 22.34 Cost ($/m³) 8 6