rod of length 20 mm is stretched to make a rod of length 40 mm. Subsequently it is compressed to make a rod of final length 10 mm Consider the longitudinal tensile strain as positive and compressive strain as negative.What is the total true longitudinal strain in the

rod of length 20 mm is stretched to make a rod of length 40 mm. Subsequently it is compressed to make a rod of final length 10 mm Consider the longitudinal tensile strain as positive and compressive strain as negative.What is the total true longitudinal strain in the

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter7: Analysis Of Stress And Strain

Section: Chapter Questions

Problem 7.7.15P: A brass plate with a modulus of elastici ty E = 16 X 106 psi and Poisson’s ratio a = 0.34 is loaded...

See similar textbooks

Related questions

Q: In uniaxial loading the poisson's ratio is 0.30 and the strain in the x- direction is 250 x 1O^-6 .…

Q: 1. A circular aluminium tube of length L = 400 mm is loaded in compression by the force P. The…

A: 1. Given: The length of tube, L = 400 mm The outside diameter of tube, D = 60 mm The inside diameter…

Q: A circular solid piece of rock is tested in a compression testing rig to examine its stress/strain…

A: Sample diameter, d=6 inchesSample original length, L=12 inchesCompression load, P=10000 lbfReduction…

Q: Can the normal strain on the free surface of a body be measured in aparticular direction using an…

A: The magnitude of the strain measures using the device strain gauge. Strain gauge works on a…

Q: Q3/ A specimen having a rectangular cross section 0.000721mm2 is pulled in tension with 55,500 N…

A: A=0.000721 mm2T=55500Nyoung;s modulus (E)=70GPa∑=70*109Pa=70*103MPa=70*103 N/mm2

Q: A rod 31 cm long and 0.33 cm in diameter is subjected to a load of 4,500 N and its diameter is…

Q: Question 1 (a) Describe the term compressive strain. (b) Explain the concept of Poisson's ratio (µ).…

A: Answer part (b) Poisson' ratio: The ratio of the lateral strain to the axial or longitudinal strain…

Q: Please include a free body diagram Solve for: a) Normal strain in the x- direction −4.0 ×…

Q: A steel wire having cross section area 2 mm2 is stretched by 10 N. Find the lateral strain produced…

Q: In uniaxial loading the poisson's ratio is 0.30 and the strain in the x- direction is 250 x 10^-6 .…

Q: m principal strain theory; 4. Maximum strain energy theory; and 5. Ma

Q: In uniaxial loading the poisson's ratio is 0.30 and the strain in the x-direction is 250 x 10^-6.…

Q: In uniaxial loading the poisson's ratio is 0.30 and the strain in the x- direction is 250 x 10^-6 .…

A: Given Poisson's ratio = 0.30 Strain in the x- direction = 250 x 10-6 Find Strain in the z-…

Q: Calculate the strain (e) for a change in length (ö) and a length (L), where 0 = 0.015 in and L = 5…

A: Given data: δ=0.015 inL=5 ft Need to determine the strain.

Q: A light wire 1.75 m long has a cross-sectional area of 2.3 mm². It is hung vertically and stretches…

A: hookes law states that stress is directly proportional to Strain. Youngs modulus = Stress/Strain…

Q: A tension specimen of circular cross-section tapers uniformly from 20 mm to 16 mm diameter over a…

A: given; for tapered bar;diameter(d1)=20mmdiameter(d2)=16mmgauge length(l)=200mmaxial load(P)=40KN…

Q: When a tensile load of 20kN is applied to a rod, the extension of the rod is 0.2 mm and the strain…

A: Given data: Extension in the rod, ΔL = 0.2 mm. Strain, ε = 0.01. The strain equation is, ε=∆LL…

Q: If the in-plane principal strains both have the same sign, the absolute maximum shear strain will…

A: The statement is true.

Q: Find initial length of rod Change in length-0.02 mm Strain-0.0002

Q: A solid circular rod that is 600 mm long and 20 mm in diameter is subjected to an axial force of P =…

A: Given Data: L=600 mm=0.6m d=20 mm=0.02m so, Area=πd24=π4×0.022=3.1415×10-4m2 P=50…

Q: If longitudinal strain for a wire is 0.03 and its Poisson's ratio is 0.5, then its lateral strain is

Q: When a tensile load of 20kN is applied to a rod of length 5 cm, the strain is 0.05. The change in…

Q: bar is 250 mm long and 10 mm square over part of its length, the remainder being circular with a…

A: as per our company guidelines we are supposed to answer only first three sub-parts. Kindly repost…

Q: When an axial load is applied to the ends of the two- segment rod shown in Figure P2.1, the total…

Q: (iii) What is the strain of brass rod of length 250mm which is subjected to a tensile load of 50kN…

A: Given : Length L= 250 mm load P = 50 KN Change in length L1 = 0.5 mm

Q: A Mild steel rod of 15mm diameter that is 1.5 cm in length is elongated by 0.15mm along its…

A: Given Data Load in x direction, P=15000N Diameter of the steel rod, D=15mm Length of the steel,…

Q: subjected to a shearing force of 715N on its top cylindrical face. If the dowel has a diameter of…

Q: The Poisson ratio formula for an auxetic structure given in the figure is given as follows: H = 8…

A: Given Data Height of structure is : H=8 cm=80 mm Length is : L=4 cm=40 mm Angle is : α=50°…

Q: An element of bone in plane strain where the state of strain are = 12 x 10-4). Find (a) the stresses…

A: Given Data εx=8×10-4 εy=5×10-4γxy=12×10-4 μ=v=0.3 E=2×109 N/m2

Q: A 2m long rod of radius 1 cm which is fixed from one end is given a force of 8 N. Calculate the…

A: Given data: The radius of the rod is R = 1 cm. The force is F = 8 N. The elastic constant is E =…

Q: is positioned at point A for strain measurement. The orientation of the strain rosette is shown in…

Q: A mild steel specimen of Diameter 9 mm, Length 16 cm is subjected to tensile load and it is found…

Q: A cylindrical wire which has a starting diameter of 5 mm is deformed two times to make a finer…

A: Given : D = 5mm 20% reduction in area for each deformation To find : Total effective strain

Q: steel bar 300 mm long, 50 mm wide and 40 mm thick subjected to a pull of 300 kN in the direction of…

A: Given data ,Length L=300 mmPull force P=300 KNE=2x105 MPam=4u=14=0.25

Q: A rod is 0.5 m long and 5 mm diameter. It is stretched 0.06 mm by force of 3 kN. Calculate stress…

A: Length of the rod, L= 0.5 m= 500 mm Diameter of the rod, d= 5 mm Length stretched, ∆L= 0.06 mm…

Q: A rod is subjected to a uniaxial load within linear elastic limit. When the change in the stress is…

A: Given data: The change in stress in the rod is σ = 200 MPa. The change in stain in the rod is ε =…

Q: A solid circular bar is acted upon by tensile force of 30 N. The diameter of circular Bar is 10 mm.…

Q: some element, the displacement is obtained as u = [1 + 3x +4y +5xy]x10^(-3) mm. The normal strain…

A: A fluid element in the flowing fluid may have the translation, rate of deformation, and rotation. It…

Q: The poisson's ratio for a homogeneous bar is V3. If the bar is subjected to a tensile load, the…

Q: What strain will be produced by a stress of 80 x 106 N/m2, for a given modulus of elasticity 200GPa.…

A: Given, stress = 80 x 106 N/m2 modulus of elasticity (E) = 200GPa= 200x 109 N/m2

Q: The area of a steel bar is 80 square millimeter and length is 0.058 m long. It is stretched with a…

Question

A rod of length 20 mm is stretched to make a rod of length 40 mm. Subsequently it is compressed to make a rod of final length 10 mm

Consider the longitudinal tensile strain as positive and compressive strain as negative.What is the total true longitudinal strain in the rod?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A brass plate with a modulus of elastici ty E = 16 X 106 psi and Poisson’s ratio a = 0.34 is loaded in biaxial stress by normal stresses r and cry. (sec figure). A strain gage is bonded to the plate at an angle 4 = 350 If the stress o is 10,700 psi and the strain means used by the gageise = 390 X 106.whatisthcmax- imum in-plane shear stress (Tr, ),. and shear strain (>‘ ).? What is the maximum shear strain (y ) in the x-: plane? What is the maximum shear strain (y ).. in the y-r plane?
- 7.2-26 The strains on the surface of an experiment al device made of pure aluminum (E = 70 GPa. v = 0.33) and tested in a space shuttle were measured by means of strain gages. The gages were oriented as shown in the figure. and the measured strains were = 1100 X 106, h = 1496 X 10.6, and = 39.44 X l0_. What is the stress o in the x direction?
A mild steel rod of 12mm diameter was tested for tensile strength with the gauge length of 60mm. After the test final length and the final diameter were 80mm and 7mm, respectively. Find the strain in the transverse direction
A tensile force of 10 kN is applied on a 0.02-m diameter and 2-m long rod. After applying theload, the diameter of the rod decreases to 0.01998 m and the length increases to 2.01 m. The lateral (transverse) strain is?
A metal bar 5.0 m long extends by 0.05 m when a load is applied to it. The strain is?
Find the value of strain if initial length of rod is 100 m and change in length of rod due tensile load is 0.0023 m
A 0.1-in wire that is 10-in long and supports a 100-lb weight stretches a total of 0.1-in. What is the strain for the wire?
What do I do with the given Deformation (0.54 and 0.95) Even though I already have the Original Length (55mm) and Final Length (68.12mm) in finding the Strain(%)
Tensile test specimens are extracted from the "X" and "y" directions of a rolled sheet of metal. "x" is the rolling direction, "y" is transverse to the rolling direction, and "z" is in the thickness direction. Both specimens were pulled to a longitudinal strain = 0.15 strain. For the sample in the x-direction, the width strain was measured to be ew= -0.0923 at that instant. For the sample in the y-direction, the width strain was measured to be gw=-0.1000 at that instant. The yield strength of the x-direction specimen was 50 kpsi and the yield strength of the y-direction specimen was 52 kpsi. Determine the strain ratio for the x direction tensile test specimen. Determine the strain ratio for the y-direction tensile test specimen. Determine the expected yield strength in the z-direction. Give your answer in units of kpsi (just the number). If the sheet is plastically deformed in equal biaxial tension (a, = 0, to the point where & = 0.15, calculate the strain, 6, that would be expected.
Find the strain in rod if initial length of rod is 190 mm and change in length of rod is 0.0112 mm
Question 7 At the proportional limit, a certain material has a stress of 75 MPa as the strain is 0.0007. What is the modulus of elasticity of the material in GPa?
The figure below shows a hollow circular beam with an outside diameter of 150 mm and a wall thickness of 50 mm loaded in bending with force F = 400 kN. F Ra Rb 1 m 1 m Young's modulus of the beam is 95 GPa. Calculate the second moment of area, I, in m4 in the form a x 10 6 where the number a is correct to two decimal places. I: x10-°m4 Calculate the maximum bending moment, M, in kilonewtonmetres (kNm): M: kNm Calculate the maximum bending stress, o, in megapascals (MPa) correct to two decimal places. MPa