Show the P-h diagram and your solutions. 1. A simple vapor compression cycle using R-134 refrigerant has capacity of 30 TOR. Evaporator and condenser temperatures are -10 °C and 45 °C respectively. Calculate the following: a. Mass flow rate of refrigerant in kg/min b. COP c. Heat Rejected (kW) d. Compressor Work (kW)

Show the P-h diagram and your solutions. 1. A simple vapor compression cycle using R-134 refrigerant has capacity of 30 TOR. Evaporator and condenser temperatures are -10 °C and 45 °C respectively. Calculate the following: a. Mass flow rate of refrigerant in kg/min b. COP c. Heat Rejected (kW) d. Compressor Work (kW)

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter40: Typical Operating Conditions

Section: Chapter Questions

Problem 4RQ: A typical temperature relationship between a high-efficiency condenser and the ambient temperature...

See similar textbooks

Similar questions

Two methods used to power refrigeration compressors on a ship are _____and ____.
A typical temperature relationship between a high-efficiency condenser and the ambient temperature is A. 10F. B. 20F. C. 30F. D. 40F.
Need complete correct and urgent answer. I'll give you more likes. Q.Design Ideal Vapour Compression refrigeration cycles for two different refrigerant and compare their performances.
A vapor compression refrigerating cycle uses refrigerant 22 has the following data. Temperature at evaporator is at -1°c and the pressure at the condenser is at 1535.5 KPa find: A. Refrigerating effect in kj/kg. B. Work of the compressor in kj/kg. C. COP, D. Heat rejected in kj/kg For a 1 ton refrigerating capacity determine E. Mass flow rate. F. Volume flow rate. g. Actual work of the compressor in kW H. Actual heat rejected in kW
The air outside is 40 C and 60% r.h. I want torun an air conditioner to cool it to 15 C. The deliver rate should be 1000 m^3/min. What is Q and the rate at which water condenses (if any)?
r, 18. How many tons of refrigeration effect can be obtained from a window air conditioner rated at 18,000 Btu/hr.?
Refrigerant 134a is used in a cooling system operating according to the ideal cooling cycle with vapor compression for cooling the cold storage in the milk processing plant. The flow rate of the refrigerant is 0.10 kg/s. The condenser and evaporator pressures are 1000 kPa and 600 kPa, respectively. a) Calculate the cooling capacity as (kW). b) Calculate the volumetric flow rate of the refrigerant at the compressor inlet. c) Calculate the efficiency coefficient of the cooling system.
Q.2: A refrigeration system using refrigerant 22 is to have a refrigerating capacity of 80 kW. The cycle is a standard vapor-compression cycle in which the evaporating temperature 42°C. -8°C and the condensing temperature (a) Determine the volume flow of refrigerant measured in cubic is meters inlet at the to the compressor. second per (b) Calculate the power required by the compressor. (c) At the entrance to the evaporator what is the fraction of vapor in the mixture.
1- Consider two vapor compression refrigeration cycles .The refrigerant enters the hrottling valve as a saturated liquid at.30°C in one cycle and as subcooled liquid at 30°C n the öther one. Tlhe evaporátor pressure for both cycles is the same .Which cycle do you jink will have a higher COP ?
b. A refrigerating system using Freon-12 has an evaporator saturation temperature of - 25°C and a condenser saturation temperature of 35°C. The vapor is dry saturated at entry to the compressor and has a temperature of 65°C after compression to the condenser pressure. There is no undercooling of the liquid in the condenser. i. Calculate the input power required by the compressor per kW of refrigeration. ii. Calculate the COPRef of the refrigerating system. ii. Show the operating cycle of the refrigerating system on a T-s diagram.
3.5 An ammonia refrigeration system operates between saturated suction temperature of -20°C, and saturated discharge temperature of +40°C. Com- pare the COP of the cycle using wet compression with that of the cycle using dry compression. Assume that the vapour leaving the compressor is saturated in the case of wet compression, and the vapour entering the compressor is saturated in the case of dry compression. The refrigerant leaves the condenser as saturated liquid.
provide solutions using the ASHRAE tables and charts A standard ammonia vapor-compression cycle developing 20 tons of refrigeration operates with a condensing temperature of 32°C and an evaporating temperature of -14°C. Calculate the ..