XØ ER FⒸPrivTerring Time: 2 hours, 23 minutes, 08* Question Completion Status:87°FCloudy3Tensile Force, P = 294 KNPipe Dimensions:Outer Diameter = 84 mmInner Diameter = 70 mmLength, L = 339 mmMaterial Property.Esteel = 200 GPaEaluminum = 70 GPaAP=Beconds.The A-36 steel pipe has a 6061-T6 aluminum core. It is subjected to a tensile force.Given:O10L111214Determine the average normal stress (MPa) in the aluminum due to this loading.Express your answer in 2 decimal places.15- P1617 181920hoW6

Given data, Tensile force = P = 294kN Outer diameter of pipe = dO = 84mm inner diameter of pipe =…

The A-36 steel pipe has a 6061-T6 aluminum core. It is subjected to a tensile force. Given: Tensile Force, P = 294 KN Pipe Dimensions: Outer Diameter = 84 mm Inner Diameter = 70 mm Length, L=339 mm Material Property. Esteel = 200 GPa Ealuminum = 70 GPa P L -P Determine the average normal stress (MPa) in the aluminum due to this loading. Express your answer in 2 decimal places.

The A-36 steel pipe has a 6061-T6 aluminum core. It is subjected to a tensile force. Given: Tensile Force, P = 294 KN Pipe Dimensions: Outer Diameter = 84 mm Inner Diameter = 70 mm Length, L=339 mm Material Property. Esteel = 200 GPa Ealuminum = 70 GPa P L -P Determine the average normal stress (MPa) in the aluminum due to this loading. Express your answer in 2 decimal places.

Solid Waste Engineering

3rd Edition

ISBN:9781305635203

Author:Worrell, William A.

Publisher:Worrell, William A.

Chapter5: Separation Processes

Section: Chapter Questions

Problem 5.34P: using Figure 5-27, what is the advantage of the suspended type magnet over the other two types of...

See similar textbooks

Similar questions

47 H.WOA rod Consists of three bars af unequal dlameters as shown in fig., find the Stress in each bar and the C longation of the rood ?_use E= 200GPA %3D =30mm =20 mm 1.5m 2.5m 2m
Chapter 5, Reserve Problem 026 A solid aluminum [E = 70 GPa; a = 22.5 x 106/°C] rod (1) is connected to a solid bronze [E = 100 GPa; a = 16.9 x 106joc] rod (2)vat flange B as shown. Aluminum rod (1) has an outside diameter of 58 mm, and bronze rod (2) has an outside diameter of 110 mm. The bars are unstressed when the structure is assembled at 30°C. After the 300-kN load is applied to flange B, the temperature increases to 45°C. Determine the normal force in rod (1). 150 kN (2) (1) 150 kN 2.6 m O 40.1kN (C) O 62.2kN (C) O 54.0kN (C) O 49.0kN (C) O 74.3kN (C)
kiv 01 A E = 200 GPA deformation BC deformationn AB total defomatiom of ABCD 5.34 mm O -5.34 mm O -0.88 mm 0.67 mm -1 mm O-3.5 mm 3.5 mm --0.75 mm O -7.11 mm 2m 20 sq mm 3 KN 2m 40 sq mm C 1.5 m 80 sq mm qkN
Q-2 The rotating shaft running at n = 900 rpm, shown in the figure below, is machined from AISI 1045 CD steel. It is subjected to a force of F = 10.1 kN. The shaft is experiencing an operating temperature of 35 oC. With the specified loading and for a reliability of 99.9 %, a) Determine the minimum factor of safety for fatigue based on infinite life*. b) Determine the maximum safe load (Fmax) that can be applied for a factor of safety of 1.5 and a design life of 5x105 cycles, all other input values remaining the same. c) Determine factor of safety against yielding. *Free-body, shear-force and bending moment diagrams are required.
6) A hollow steel tube is to be used to carry an axial compressive load of 160 kN. The yield stress for steel is 250 N/mm2. A factor of safety of 1.75 is to be used in the design. The following three class of tubes of external diameter 101.6 mm are available. Class Thickness Light Medium 4.05 mm 3.65 mm Heavy 4.85 mm Which section do you recommend?
Two channels having the given properties shown is placed at a distance of 300 mm to back and is properly connected by a pair of lacings as shown. 305 mm Fy=248 mpa Properties of one channel A = 5690 mm² Ix = 67.3 x 10 mm* Assume K = 1.0 -260 mm- Lucre x= 17- d = 305 mm ly 2.12 x 10 mm x 17mm CIVIL ENGINEERING - STEEL DESIGN Determine the safe axial load in kN, that the column section could carry. Unsupported height of column is 6m.
(47 H.WOA rod Consists of three bars of unegqual dlameters as shown in fig., find the Stress in each bar and the C longation of the rocd ? use E= 200G Va Ø= 4omm Ø=20 mm 2. W 1.5m 2.5m 2m مرّ للأعلى لاستعراض الفلاتر II V
The eye bolt is used to support the load of 5 kip. Determine its diameter d to the nearest 1/8 in and the required thickness h to the nearest 1/8 in of the support so that the washer will not penetrate or shear through it. The allowable normal stress for the bolt is σallow = 21ksi and the allowable shear stress for the supporting material is Tallow=5 ksi. Show the FBD and solution
View Policies Current Attempt in Progress A solid aluminum [E = 70 GPa; a = 22.5 x 10-6/°C] rod (1) is connected to a solid bronze [E = 100 GPa; a = 16.9 x 10-6/°C] rod (2)vat flange B as shown. Aluminum rod (1) has an outside diameter of 50 mm, and bronze rod (2) has an outside diameter of 122 mm. The bars are unstressed when the structure is assembled at 30°C. After the 300-kN load is applied to flange B, the temperature increases to 45°C. Determine the normal force in rod (1). 150 kN B (2) (1) 150 kN 2,6 m 1 m O 48.4 kN (C) O 60.4 kN (C) O 44.2 kN (C) O 31.9 kN (C) O 35.4 kN (C)
H.W A Solid Steel bar of dlameter 6omm and length 350 mm is Placed inside an aluminum cylinder öf Inside diameter Femm and out side d lameter Ilomm, a comPressive load of looo lais applied on the assembly, find the stresses in the bar and the cylinder ? take Est = 200GPa and EAl = F0GPan %3D Cover Plate 0.25mm d- do 35omm A lum. cylinder Steel bar
_Find: (a) the stress in the Steel and Ahuminium rods after the loap P applied and the temprature raised 60 C" and (b) the displacement under the load P. Using the data in the Table below. Rod A (mm) a (um/m. C°) L (m) d (m) 0 (degree) E (GPa) P (kN) Steel 400 T1.2 195 3 35 Aluminium 300 18.9 4 30 90 Aluminium Steal 4m 2m
H.W.2: A hollow steel [E = diameter of 2.75 in. and a wall thickness of 0.25 in. is fastened to a solid aluminum [E = 10,000 ksi] rod (2) that has a 2-in.-diameter and a solid 1.375-in.-diameter aluminum rod (3). The bar is loaded as shown in Figure 30,000ksi] tube (1) with an outside %3D Determine (a) the change in length of steel tube (1). (b) the deflection of joint D with respect to the fixed support at A. (c) the maximum normal stress in the entire axial assembly. 34 kips 18 kips 25 kips (2) (3) (1) Sho B. 18 kips 34 kips 40 in. 30 in. 60 in. FIGURE