There are developed 1063 kW at 267 rpm by an 8-cylinder, 2-stroke, 40.64 x 50.8 cm, diesel engine that uses 0.082 kg/s of fuel with heating value of 42,571 kJ/kg. The indicated mean effective pressure is 562 kPa Determine (a) brake thermal efficiency (b) indicated thermal efficiency (c) mechanical efficiency

There are developed 1063 kW at 267 rpm by an 8-cylinder, 2-stroke, 40.64 x 50.8 cm, diesel engine that uses 0.082 kg/s of fuel with heating value of 42,571 kJ/kg. The indicated mean effective pressure is 562 kPa Determine (a) brake thermal efficiency (b) indicated thermal efficiency (c) mechanical efficiency

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

3 (4) A 1500 cm four-stroke cycle, four cylinder CI engine, operating at 3000 r.p.m. produces 48 kW of brake power. volumetric efficiency is 0.92 and air-fuel ratio AF 21:1. calculate :- (a) rate of air flow into engine. kg sec (b) Brake specific fuel consumption. (c) Mass rate of exhaust flow. kg hr gm kW.hr kW (d) Brake output per displacement. L ANS: (a) 0.0407, (b) 145.5, (c) 153.5, (d) 32
(7) A single-cylinder, four-stroke cycle CI engine with 12.9 cm bore and 18 cm stroke operating at 800 r.p.m. uses 0.113 kg of fuel in four minutes while developing a torque of 76 N.m. calculate :- (a) Brake specific consumption.hr (b) Brake mean effective pressure. (kpa) (c) Brake power. (kW) (d) specific power. kW (e) Output per displacement. (kW) L (f) Specific volume. L kW
An I.C. engine with brake power output an AF ratio of 15 to 1 uses a fuel with a heating value of 20,000 Btu/lb. fuel. The unit produces a continuous brake power output of 500 bhp while consuming 90 lb. of fuel during a 30-minute period of operation. From the engine performance, the indicated thermal efficiency is found to be 39 percent. Calculate (a) the mechanical efficiency, %; (b) the required air flow, lb. air/min; and (c) the brake specific fuel consumption, lb. fuel/bhp-hr.
A) The volumetric efficiency of a six-cylinder, 3-liter SI engine operates on a four-stroke cycle at 2500 RPM is ny = 0.91. At this condition, the mechanical efficiency of the engine is 65%, and 1000J of indicated work are produced each cycle in each cylinder. Calculate (i) Air flow rate into engine (ii) Brake output per displacement (iii) Torque.
(6) A small single-cylinder, two-stroke cycle SI engine operates at 8000 r.p.m. with a volumetric efficiency of (0.85). the engine is square (bore-stroke) and has a displacement 3 of 6.28 cm the fuel-air ratio FA=0.067 . calculate :- m (a) Average piston speed. sec (b) Flow rate of air into engine. kg sec (c) Flow rate of fuel into engine. (kg sec (d) Fuel input for one cycle. kg cycle (d) 4.22×10-7 ANS: (a) 5.33, (b) 0.00084, (c) 5.63×107
John’s automobile has a three-liter SI-V6 engine that operates on a four-stroke cycle at 3600 RPM. The compression ratio is 9.5, the length of connecting rods is 16.6 cm, and the engine is square (B=S). at this speed, combustion ends at 20o at T.D.C. This engine is connected to Dynamometer which gives a brake output torque reading of 205 N-m. At his speed, air enters the cylinders at 85 kPa and 60o C, and the mechanical efficiency of the engine is 85%. Calculate: (a) Brake power, HP || (b) Indicated Power, HP || (c) Brake Mean Effective Pressure, Bmep , Psia || (d) Indicated Mean Effective Pressure, Imep, Psia || (e) Friction Mean Effective Pressure, Fmep, Psia
2. A four-cylinder 2.5 L spark-ignited engine is mounted on a dyno and operated at a speed of W=3000 rpm. The engine has a compression ratio of 10:1 and mass air--fuel ratio of 15:1. The inlet air manifold conditions are 80 kPa and 313 K. The engine produces a torque of 160 Nm and has a volumetric efficiency of 0.82. (a) What is the brake power Wb (kW)? (b) What is the brake specific fuel consumption bsfc (g/kWh)?
1- A four-cylinder, two stroke cycle diesel engine with (10.9 cm) bore and (12.6 cm) stroke produces (88 kW) of brake power at (2000 RPM). Compression ratio is (18:1). Determine: (a) Engine displacement. Ans.: (4700.6 cm³). (b) Brake mean effective pressure. Ans.: (561.7 kPa).
The following data is given for a four-stroke diesel engine: Cylinder bore = 250 mm, Length of stroke = 300 mm, Speed 600 rpm, Indicated mean effective pressure = 0.6 Mpa, Mechanical efficiency = 80% Maximum gas pressure = 4 Mpa, Fuel consumption = 0.25 kg per BP per h Higher calorific value of fuel = 44 000 kJ/kg, Assume that 5% of the total heat developed in the cylinder is transmitted by the piston. The piston is made grey cast iron FG 200 (Sut = 200 N/mm² and k = 46.6 W/m/°C) and the factor of safety is 5. The temperature difference between the centre and the edge of the piston head is 220°C. (i) Calculate the thickness of piston head by strength consideration. (ii) Calculate the thickness of piston head by thermal consideration. (iii) Which criterion decides the thickness of piston head? (iv) State whether the ribs are required. (v) If so, calculate the number and thickness of piston ribs. (vi) State whether a cup is required in the top of the piston head. (vii) If so, calculate…
What is the mechanical efficiency of a diesel engine if friction power is 30 KW and brake power of 150 KW?
At this speed, the volumetric efficiency of the engine is 92%, Apa 0.07 bar, C, 0.85, C = 2. A four-stroke, 6-eylinder, 3.6 Itr SI engine, is designed to have a maximum speed of 6000 F-p. a 0.6, fuel density = 700 kg/m'. At sea level the air temperature and pressure are 27°C and 1 bar réspectively, and AF 15. Caleulate: (i) Throat diameter of the carburetor. (i1) Fuel ome !! area. (iii) AF at altitude of 3000 m.
During the trial of a single-cylinder, four-stroke engine, the subsequent consequences have been obtained. Mean specific heat of exhaust gas = 1 kJ/kg K Mashkour Cylinder radius = 10 cm Stroke = 40 cm Mean effective pressure = 6 bar Torque = 407 Nm Speed = 250 rpm Fuel consumption = 4 kg/h Calorific value of fuel = 43 MJ/kg Cooling water float rate=4.5 kg/min Air used in keeping with kg of fuel = 30 kg Rise in cooling water temperature = 45 C , Temperature of exhaust gases = 420 C Room temperature = 20 °C Specific heat of water = four.18 kJ/kg K. Find the ip, bp.