TUTORIAL PROBLEMS2. A long shunt compound ganerator has full losd output of 100 kW st 250 volts. The armature, series andshunt windings bave rmistances of 0-05 ,0-03 0 and 55 respectively. Find the Brmature current andL A 4 oele shunt gmerstor with wave-wound armature has 41 alots, nch having 12 conductors. Thmuture resistance is 0-05 and shunt field resistance is 200 . The flux per poie in 25 mWh. Ifa londce of 10 is connected soros the armabure ferminals, calculate the voltage scross the lond wmrior is driven at 1000 rp.m389-5 Vpmented emf464-5 A, 282-3 V

As per guidelines we are supposed to solve only first question if multiple questions are asked by…

TUTORIAL PROBLEMS LA4gele shunt gmerstor widh wave-wound armature has 41 alots,, ech having 12 conductors. Th resistance is 0-05 and shant field resistance is 200 . The flux per pole is 25 mWb Ifa koe ce of 10 nis connected wron the armabure terminals, calculate the voltage scross the lond w ris driven at 1000rp.m mcr A long shunt compound gemerator hu fall lead

TUTORIAL PROBLEMS LA4gele shunt gmerstor widh wave-wound armature has 41 alots,, ech having 12 conductors. Th resistance is 0-05 and shant field resistance is 200 . The flux per pole is 25 mWb Ifa koe ce of 10 nis connected wron the armabure terminals, calculate the voltage scross the lond w ris driven at 1000rp.m mcr A long shunt compound gemerator hu fall lead

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter3: Power Transformers

Section: Chapter Questions

Problem 3.28MCQ

See similar textbooks

Similar questions

An AC source provides peak output Vi and peak current ii when connected to the coil primary of a transformer. The transformer has Np turns in the primary coil and Ns turns in the secondary coil. A resistance circuit R is connected to the transformer, see figure below. What is the equivalent resistance of the circuit?
all äabl (CME 446) 1 If F3=0.1 and Z3=45 Q, then the impedance of the next stage in the multi-section transformer is: of O a. 40.5 stion O b. 49.5 O C. 55 O d. None O e. 36.8 s page Next page
Single phase half wave AC-AC converter has a resistance of R = 50 ohms. Input voltage is given as 230 Vrms. Transformer conversion ratio is 1:1. If T1 thyristor is triggered at 60 degrees; a)Rms output voltage? b)Output power? c)RMS load current and average load current? d)Input power factor? e)Average and RMS thyristor current?
Q-3 A Cockeroft-Walton type voltage multiplier has ten stages with capacitances, all equal to 0.1 µF. The supply transformer secondary voltage is 100 kV at a frequency of 60 Hz. If the load current to be supplied is 5 mA, find (a) the percentage ripple, (b) the regulation, and (c) the optimum number of stages for minimum regulation or voltage drop.
A 250/125 V, five kVA single-phase transformer has a primary resistance of 0.2 ohms and reactance of 0.75 ohms. The secondary resistance is 0.05 ohm and reactance of 0.2 ohms.a) Determine its regulation while supplying full load on 0.8 leading p.f.b) The secondary terminal voltage on full load and 0.8 leading p.f.Ans.: -0.4.88%; 131.1
Determine the regulation of a transformer in which thepercentage resistance drop is 1% and the percentagereactance drop is 5% when the power factor 0.8 leading.
What is use of solenoid coil in the pressure to converter? a. To produce magnetic field in the LVDT b. To change the LVDT output c. To bring back the pivoted beam normal position d. To produce linear displacement in bellows
Q/ A 20 KUA , 200/500 voit single phase step-up transformer hes: primary resistance: 0.022 ; secondary resistance = 0.0482; magnetizing branch with Ro - 1001 and Xo = 750.52. Findi magnetizing Current ? The efficiency at rated current unity ef: wa efteciemy at hall rated current with Pt 0.7 leading? The effecieing at 0:8 Vated current Zerol.f._; Maxoff At vnity PF ?
low shows the circuit diagram of the linear variable differential transformer (LVDT). Figure 2 The primary coil is sinusoidally excited. (e) Clearly explain its operation when the core is moved from side to side (b) Given that the excitation frequency is much higher than the frequency of movement of the core, draw waveforms to show the output voltage for the following displacement waveforms. Xi Comment on your output waveforms.
In a buck converter, what are the benefits and disadvantages if the changes of duty cycle is drastic i.e, fast system response? How about when duty cycle changes slowly i.e, slow system response?
The primary ofa certain transformer takes 1 A at a power factor of 0.4 when connected across a 230 V, 50 Hz supply and the secondary is on open circuit. The number of turns on the primary is twice that on the secondary. A load taking 50 A at a lagging power factor of 0.8 is now connected across the secondary. Sketch, and explain briefly, the phasor diagram for this condition, neglecting voltage drops in the transformer. What is now the value of the primary current?
A transformer has primary and secondary turns of 1250 and 125 respectively. It has core cross-sectionof 36 cm2 and its rms flux density is to be limited to 1.4 T (to prevent core saturation). Whatmaximum 50 Hz voltage can be applied on the primary side and the corresponding open-circuitsecondary voltage?The core has a mean length of 150 cm and its relative permeability can be assumed to be 8000. Whatwould be the rms exciting current when the transformer’s primary winding is excited at a voltage ascalculated above? Also calculate the magnetizing susceptance as seen from primary and secondarysides.If the transformer were to be excited at 60 Hz, 1. What should be the maximum primary voltage for thecore flux density limit not to be exceeded? 2. What would be the magnetizing susceptance as seen oneach side in this case?