Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=3 ft, b=9 ft, c=3ft and w=3 kips/ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questionsin the subsequent parts of this GO exercise.aa*Answers: Ay =Calculate the reaction forces Ay and Cy acting on the beam. Positive values for the reactions are indicated by the directions of thered arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.)BtbPWbWC-C₂сkips, Cy=pD-Xkips.

Answered: Image /qna-images/answer/4b77348a-13b7-4ae4-b4c7-3981bbbfe61a.jpg

Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=3 ft, b-9 ft. c=3 ft and w=3 kips/ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. a f a B Answers: Ay = Calculate the reaction forces Ay and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) B b i W b W C C₁ D C kips, Cy= i -X kips.

Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=3 ft, b-9 ft. c=3 ft and w=3 kips/ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. a f a B Answers: Ay = Calculate the reaction forces Ay and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) B b i W b W C C₁ D C kips, Cy= i -X kips.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In your response, please display the full computation and all FBDs that were used. Only round off at the final answer with 4 decimal places. P=2kN, F=3kN, and moment M=0.5kN-m are acting on the structure in the illustration. A pin at Z and a cable RQ connected by a connecting pin R support it. Im ● F ● P S TO M Im R lu W OZ a' 0.8m 3m If the pin support Z's factor of safety against shear stress is 3, determine whether a single or double shear should be provided for an economical and safe design. 4 m The mas allowable shear stress in the pin is 50MPa. Consider the following specifications. Single shear design: 25mm pin diameter Double shear design: 17mm pin diameter
The following diagram corresponds to questions 1 to 3. A beam rests on two sharp edges as shown on the image. The beam has a length of 7,50 m and a mass of 4,25 kg. Object 1 has a mass of 1,50 kg; object 2 has a mass of 2,35 kg. Point P is 0,50 m form the center of the beam. d 2 Pl CG 1. How much is the torque done by object 1 around point P? A. 55,2 N*m B. 7,36 N*m С. 62,5 N*m D. Object 1 doesn't exert a torque.
A force (FCD = 4.49 kN) is applied to a utility pole as shown.a) Write an algebraic expression with appropriate subscripts for the moment about the line passing through OF. What alternate moment arms could be used?b) Create a 3x3 determinant for the moment about line OF and solve. What does the sign of your answer indicate?c) Find the shortest distance between line OF and the line of action of the force.d) Find the 3D angle between OF and CD.
Problem 3: Now we will repeat the previous problem using the Cartesian method. Values: FA = 20 N FB = 30 N a = 25° Use the Cartesian method to determine... a) the magnitude of the resultant force on the bolt. b) the angle made by the resultant, as measured relative to the positive x-axis. Break individual forces into Cartesian components This is the method you are probably more familiar with. We are going to break each force into its respective x and y components, and then add the components together to get the resultant. We can therefore check our answers to the previous problem. Add components along x & y FA This is what we do in the real world by the way. When we don't have answers in the back of the book, we use different methods of achieving the same result, and if we don't get the same result, we know something is wrong. Here's an illustration of what we're doing: FIX X α FRY FB FRX Determine magnitude and direction of resultant
S00 Ib In the fig. shown, compute the ff: (16-18) the resultant using cosine law (force polygon) 60 R = 35 (19-20) the angle of the R measured 500 lb cW from the x- axis.
Required information A rope connecting points A and B supports the force Fshown in the figure. Write expressions using Cartesian vector representation for the following. Take L 8 ft and F 12 lb, Part 2 of 6 NOTE: This is a multi-part question, Once an answer is submitted, you will be unable to return to this part. 10 points y eBook B T 30° Hint F Print References T BA : the position vector from B to A. Mc Graw Hill MacBook Air
Graphical Method : Polygon Method F1 - 150N, 30° N of E F2 - 100N, 60° E of S 1) Find the Length and Angle 2) Find Resultant Force Vector Magnitude and %Error 3) Find Resultant Force Vector Direction and %Error
Question Use the graphical method to construct the bending-moment diagram and identify the magnitude of the largest moment (consider both positive and negative). The ground reactions and shear-force diagram are shown. 16.80 KN Units: KN Units: kN-m 16.80 2 m 14.0 kN 14.0 kN 16.80 2.80 2 m 42.0 kN 42.0 kN 2.80 -39.2 1m 39.20 KN -39.20
A dog is pulling on his lead at an angle of 39 degrees with a force of 50 Newtons. What is the force downward? Newtons. What is the force horizontally? Newtons. Note: You can type the trig in the answer box for all these problems. For example if the answer is 50cos(10), you can just type that into the answer box. To get inverse trig functions type arcsin, arccos or arctan.
The following diagram corresponds to questions 1 to 3. A beam rests on two sharp edges as shown on the image. The beam has a length of 7,50 m and a mass of 4,25 kg. Object 1 has a mass of 1,50 kg; object 2 has a mass of 2,35 kg. Point P is 0,50 m form the center of the beam. CG 1. How much is the torque done by object 1 around point P? A. 55,2 N*m B. 7,36 N*m C. 62,5 N*m D. Object 1 doesn't exert a torque. 2. How much is the torque done by the force of gravity of the beam around point P? A. 20,8 N*m N-m ך177 .B C. 156 N*m D. 313 N*m 3. If you needed to cancel the nomal forces of the two objects, where you should place object 2? The axis of rotation is point P. A. 3,30 m from point B. 9,18 m from point P C. 5,69 m from point P D. 3,62 m from point P
In the figure, let the mass of the block be 8.50 kg and the angle 0 = 30.0⁰ Step 1 m Create the free-body diagram. Use the checkboxes to select the correct vectors as instructed above. Move the vectors to the correct starting points and orient them in the correct direction as instructed. FN mg Frictionless T Draw free-body diagram here :+y +x Key to Force Labels FN = Normal force mg Gravitational force ƒ= Frictional force T = Tension
We have 2 individuals pulling a marshmellow with ropes. The resultant force is directed along the positive x-axis. Person A is pulling at 60 degree angle. 1. Find what angle ? is if individual B is pulling twice as hard as individual A. 2. Draw the vector addition relationship between the force vectors ??, ??. Also, find FA and FB resultant force, shown using ?. Use either the parallelogram law or the triangle rule.