Your boss also asks you to solve this problem: R-134a enters the condenser of a residential heat pump at 800 kPa and 55°C at a rate of 0.018 kg/s and leaves at 750 kPa subcooled by 4°C. The R-134a enters the compressor at 200kPa superheated by 4°C. Construct a T-s diagram and evaluate; (i) the isentropic efficiency of the compressor; (ii) the rate of heat supplied to the heated room; (iii) the COP of the heat pump; and

Your boss also asks you to solve this problem: R-134a enters the condenser of a residential heat pump at 800 kPa and 55°C at a rate of 0.018 kg/s and leaves at 750 kPa subcooled by 4°C. The R-134a enters the compressor at 200kPa superheated by 4°C. Construct a T-s diagram and evaluate; (i) the isentropic efficiency of the compressor; (ii) the rate of heat supplied to the heated room; (iii) the COP of the heat pump; and

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A:- A commercial refrigerator with refrigerant-134a as shown in Fig. Q3A as the working fluid is used to keep the refrigerated space at -35 °C by rejecting waste heat to cooling water that enters the condenser at 18 °C at a rate of 0.25 kg/s and leaves at 26 °C. The refrigerante enters the condenser at 1.2 MPa and 50 °C and leaves at the same pressure subcooled by 5 °C. If the compressor consumes 3.3 kW of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, and (c) the COP. 12 MPa 5°C subcooled Expansion valve Fig. Q3A Condenser Evaporator Qu Water 18% 1.2 MP 56PC Compressor
Steam at 28 bar and 50 degrees Celsius superheat is passed through a turbine and expanded to a pressure where the steam is dry and saturated. It is then reheated at constant pressure to its original temperature and then expanded to the condenser pressure of 0.2 bar. The expansion being isentropic. Draw the T-S diagram. Find (a) Work done per kg of steam and (b) thermal efficiency with and without reheats
A 100 x 300 mm ammonia compressor with a compression efficiency of 82% operates with a suction pressure of 291.57 kPa and a condenser pressure of 1203.7 kPa at 30 rps. The refrigerant cools 100 kg/min of water from 250C to 20C and assuming 5% of the useful refrigerating effect is lost due to the process of cooling, give that, h2 = 1653 kJ/kg, h1 = 1450.22 kJ/kg, h3 = 346.614 kJ/kg, v1 = 417.477 L/kg determine: a.) RE in tons of refrigeration b.) mass flow rate of ammonia c.) actual work of compression kW d.) find Brake work (kW) if mechanical eff is 90% e.) Actual volumetric eff f.) clearance volumetric eff if c=6%
Problem 2 – Heat Pump Thermodynamic Analysis Refrigerant-134a enters the condenser of a residential heat pump at 800 kPa and 50°C at a rate of 35 L/min and leaves at 750 kPa subcooled by 3°C. The refrigerant enters the compressor at 200 kPa superheated by 3°C. Neglecting changes in kinetic and potential energy and any stray heat transfer, please answer the following. a. Create a schematic of the cycle, use the same numbers used in your textbook for the inlet and exit states of each device, and include the energy exchanges between the cycle devices and the surroundings. b. Sketch the cycle processes on a T-s diagram. c. Determine the isentropic efficiency of the compressor. d. Compute the rate of heat supplied to the heated room. e. Determine the COP of the heat pump.
A 100 x 200 mm ammonia compressor with a compression efficiency of 82% operates with a suction pressure of 291.57 kpa and a condenser pressure of 1203.7 kPa at 22 rps. The refrigerant cools 100 kg/min of water from 25°C to 2°C and assuming 5% of the useful refrigerating effect is lost due to the process of cooling, determine: a) RE in tons of refrigeration hz = 1653 kJ/kg b) mass flow rate of ammonia c) actual work of compression kW d) find Brake work (kW) if mechanical eff is 90% e) Actual volumetric eff f) clearance volumetric eff if c=6%
Steam is expanded in the high pressure stage of a turbine from 4000kPa, 360°C to 1000kPa with an isentropic efficiency of 0.8. The steam is then reheated to 360°C at constant pressure and enters the low pressure turbine where it is expanded down to the condenser pressure of 4kPa with an isentropic efficiency of 0.75. The condensate leaving the condenser is at 24°C Determine: (a). the total turbine power for a mass flowrate of 5tonne of steam per hour (b). Rankine efficiency of the plant including feed pump work
Refrigerant ammonia enters the compressor of a refrigerator as superheated vapor at 0.14 MPa, -20°C at a rate of 0.04 kg/s, and leaves at 0.8 MPa, 50°C. The refrigerant is cooled in the condenser to 0.75 MPa and is throttled to 0.14 MPa. Disregarding any heat transfer and pressure drops in the connecting lines between the components, determine the rate of heat removal from the refrigerated space. kW
There are received 68,000 kg/h of steam by an ideal regenerative engine, havingonly one heater, of which the heater receives 15,400 kg/h; the condenser receivesthe remainder at 0.007MPa. If the heater pressure is 0.96MPa, find the state (qualityor °SH) of the steam (a) at the heater entrance and (b) at the consider entrance.
2.) An actual Rankine Engine is used to power a generator. The steam enters its turbine at 4 MPa and 300C then expands in an irreversible adiabatic process where it becomes saturated vapor. It enters the condenser with a pressure of 5 kPa. Find Ec, W(W₁, W₁, Wk) the remaining engine efficiencies(n,, na, nx), thermal efficiencies (e₁, 3, ek), SR(SR₁, SR₂, SR), HR(HR, HR, HR) obtained if the turbogenerator has 85% mechanical efficiency and 90% generator efficiency. 2822.88 kg W 27 e SR HR I 399.2 39.08% 14.14% 25456.73 B 339.32 33.22% 12.02% 29949.35 305.39 29.89% 10.82% 33276.96 k kg kj kg kg kWh kg kWh kg kWh 9.02- 10.61 11.79 kWh kj kWh
A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by steam ejector which pumps vapor to a condenser. Condensate is removed by condensate to an air vent. Warm return water enters the flash chamber at 13oC, chilled water comes out of the flash chamber at 5oC Vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32oC. For 350 kw of refrigeration How much vapor must the steam ejector remove from the flash chamber?
A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by steam ejector which pumps vapor to a condenser. Condensate is removed by condensate to an air vent. Warm return water enters the flash chamber at 13oC, chilled water comes out of the flash chamber at 5oC Vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32oC. For 350 kw of refrigeration How much make-up water is needed?
A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by steam ejector which pumps vapor to a condenser. Condensate is removed by condensate to an air vent. Warm return water enters the flash chamber at 13oC, chilled water comes out of the flash chamber at 5oC Vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32oC. For 350 kw of refrigeration A) How much chilled water at 5oC does this system provide? B) How much make-up water is needed? C) How much vapor must the steam ejector remove from the flash chamber?