Fluid Mechanics: Fundamentals and Applications
Fluid Mechanics: Fundamentals and Applications
4th Edition
ISBN: 9781259696534
Author: Yunus A. Cengel Dr., John M. Cimbala
Publisher: McGraw-Hill Education
bartleby

Videos

Question
Book Icon
Chapter 11, Problem 104P
To determine

(a)

The additional power required by the Recreational vehicle at given condition.

Expert Solution
Check Mark

Answer to Problem 104P

The additional power required by the recreational vehicle, W˙drag=1.05kW

Explanation of Solution

Given information:

  Length=3m

  Diameter=0.5m

  Atmospheric pressure=87kPa

  Temperature=20C=295K

  Velocity=80kmhr

Concept used:

  ρ=PRT

  FD=CDAρV22

  W˙drag=FD×V

  FDDrag forceCDDrag coefficientρDensity of airVVelocityAAreaW˙dragPower

Calculation:

The gas constant is, R=0.287kPam3kgK.

  ρ=PRT=870.287×295=1.028kgm3

Refer the table 11.2 from the textbook, for horizontal cylinder of LD=30.5=6, we get CD=0.95.

  FD=CDAρV22=0.95×[π4×( 0.5)2]×1.028×( 80×10003600 ms )22×(1N1kg m/s 2)=47.35N

  W˙drag=FD×V=47.35×(80×10003600)×(1kW1000Nm/s)=1.05kW

Conclusion:

The additional power required by the recreational vehicle is 1.05kW.

To determine

(b)

The additional power required by the recreational vehicle at given conditions.

Expert Solution
Check Mark

Answer to Problem 104P

The additional power required by the recreational vehicle, W˙drag=6.77kW

Explanation of Solution

Given information:

  Length=3m

  Diameter=0.5m

  Atmospheric pressure=87kPa

  Temperature=20C=295K

  Velocity=80kmhr

Concept used:

  ρ=PRT

  FD=CDAρV22

  W˙drag=FD×V

  FDDrag forceCDDrag coefficientρDensity of airVVelocityAAreaW˙dragPower

Calculation:

The gas constant is, R=0.287kPam3kgK.

  ρ=PRT=870.287×295=1.028kgm3

Refer the table 11.2 from the textbook, for vertical cylinder of LD=30.5=6, we get CD=0.95.

  FD=CDAρV22=0.8×(3×0.5)×1.028×( 80×10003600 ms )22×(1N1kg m/s 2)=304.6N

  W˙drag=FD×V=304.6×(80×10003600)×(1kW1000Nm/s)=6.77kW

Conclusion:

The additional power required by the recreational vehicle, W˙drag=6.77kW

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
When the submarine is on the surface, its ballast tanks are filled with air. As the submarine dives, the ballast tanks are flooded with water and the air in the ballast tanks is vented from the submarine. The submarine descends from sea level and holds at a constant depth of 3,500m. Background Information Submarine Volume is 450 m3 Mass (excluding weight in ballast tank) is 400 tons Outer haul Mass is 40 tons Thickness is 15 cm Exterior surface area is 200 m2 Specific heat capacity is 420 J/kg/K Latent heat of fusion is 250 kJ/kg Temperature at surface (depth of 0 m) is 25°C depth of 3,500 m internal of the outer haul (next to ballast tank) is 10 30°C (Refer to diagram)  external of the outer haul is 10°C (Refer to diagram) Thermal conductivity is 80 kW/m/K Emissivity of 0.9  Ballast Tank at a depth of 3,500 m Temperature at is 30°C   Seawater  Specific gravity of 1.05 Surrounding temperature at a depth of 3,500 m is 4°C Convective heat transfer coefficient for free…
When the submarine is on the surface, its ballast tanks are filled with air. As the submarine dives, the ballast tanks are flooded with water and the air in the ballast tanks is vented from the submarine. The submarine descends from sea level and holds at a constant depth of 3,500m. Background Information Submarine Volume is 450 m3 Mass (excluding weight in ballast tank) is 400 tons Outer haul Mass is 40 tons Thickness is 15 cm Exterior surface area is 200 m2 Specific heat capacity is 420 J/kg/K Latent heat of fusion is 250 kJ/kg Temperature at surface (depth of 0 m) is 25°C depth of 3,500 m internal of the outer haul (next to ballast tank) is 30°C (Refer to diagram)  external of the outer haul is 10°C (Refer to diagram) Thermal conductivity is 80 kW/m/K Emissivity of 0.9  Ballast Tank at a depth of 3,500 m Temperature at is 30°C   Seawater  Specific gravity of 1.05 Surrounding temperature at a depth of 3,500 m is 4°C Convective heat transfer coefficient for free…
When the submarine is on the surface, its ballast tanks are filled with air. As the submarine dives, the ballast tanks are flooded with water and the air in the ballast tanks is vented from the submarine. The submarine descends from sea level and holds at a constant depth of 3,500m. Background Information Submarine Volume is 450 m3 Mass (excluding weight in ballast tank) is 400 tons Outer haul Mass is 40 tons Thickness is 15 cm Exterior surface area is 200 m2 Specific heat capacity is 420 J/kg/K Latent heat of fusion is 250 kJ/kg Temperature at surface (depth of 0 m) is 25°C depth of 3,500 m internal of the outer haul (next to ballast tank) is 10 30°C (Refer to diagram)  external of the outer haul is 10°C (Refer to diagram) Thermal conductivity is 80 kW/m/K Emissivity of 0.9  Ballast Tank at a depth of 3,500 m Temperature at is 30°C   Seawater  Specific gravity of 1.05 Surrounding temperature at a depth of 3,500 m is 4°C Convective heat transfer coefficient for free…
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Heat Transfer – Conduction, Convection and Radiation; Author: NG Science;https://www.youtube.com/watch?v=Me60Ti0E_rY;License: Standard youtube license