A plane bearing plate is traversed by a very wide, 150 mm long, plane inclined slipper moving at 1.5 m's. The clearance between slipper and bearing plate is 0.075 mm at the toe and 0.025 mm at the heel. If the load to be sustained by the bearing divided by the width is 500 kN m, determine the viscosity of the lubricant required, the power consumed divided by the width of the bearing, the maximum pressure in the lubricant and the position of the center of pressure.

A plane bearing plate is traversed by a very wide, 150 mm long, plane inclined slipper moving at 1.5 m's. The clearance between slipper and bearing plate is 0.075 mm at the toe and 0.025 mm at the heel. If the load to be sustained by the bearing divided by the width is 500 kN m, determine the viscosity of the lubricant required, the power consumed divided by the width of the bearing, the maximum pressure in the lubricant and the position of the center of pressure.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Two plates are placed at a distance of 15 mm apart. The lower plate is fixed while the upper plate having surface area of 1.0 m^2 is pulled at 0.30 m/s. Whar is the force in Newton required to the speed if the fluid separating them is having viscosity of 1.5 poise?
Two plates are placed at a distance of 15 mm apart. The lower plate is fixed while the upper plate having surface are of 1.0 m^2 is pulled at 0.30 m/s. The force in Newton required to the speed if the fluid separating them is having viscosity of 1.5 poise is.
A shaft 70-mm in diameter is being pushed at a speed of 400mm/s through a bearing sleeve 70.2-mm in diameter and 250mm long. The clearance is filled with oil with a kinematic viscosity of v = 0.005 m²/s and SG-0.9. A. Find the frictional resistance exerted by the oil on the shaft in Newtons (N). B. If the shaft in the problem above is fixed axially and rotated inside the sleeve at 2000 rpm, determine the resisting torque exerted by the oil and the power required to rotate the shaft in kilowatts (kW).
Viscosity of gases with the .increase in temperature A-increase B-decrease C-non of that The space between two square flat plates is filled with oil of specific gravity 0.8 .Each side of the plate is 50 cm.The thickness of the oil film is 10 cm.The upper plate,which moves at 3 m/s requires a force of 150 N to maintain this speed. Determine : A- the dynamic viscosity of oil . B-the kinematic viscosity of oil in stokes 2 N /m^2, 20 stokes 3.5 N. s/m , 25 stokes 2 N.s /m^2, 25 stokes 7 Pa.s , 15 stokes 9.5 Pa. s, 23 stokes
The space between two square flat parallel plates is filled with oil. Each side of the square plate is 0.8 m. The specific weight of the oil is 9620 N/m?, the thickness of the oil film is 16.6 mm and requires a force of 170 N. Take the kinematic viscosity of the liquid as 16 stokes. Determine (i) the shear stress (i) the density of oil (ii) the dynamic viscosity in poise and (iv) the moving velocity of the upper plate. (ENTER ONLY THE VALUE IN THE BOXES BY REFERRING THE UNIT GIVEN IN BRACKET. ALSO UPLOAD YOUR HAND WRITTEN ANSWERS IN THE LINK PROVIDED) ()Shear stress in N/m2 (ii)The density of oil in kg/m (ii)The dynamic viscosity in poise (iv)The moving velocity of the upper plate in m/s.
QI// A vertical cylinder of diameter 190mm rotates concentrically inside another cylinder of diameter 191.5mm. Both the cylinders are 300mm high. The space between the cylinders is filled with a liquid, determine the viscosity of the liquid if a torque of 25N.m is required to rotate the inner cylinder at 123 r.p.m.
Two plates are seperated by a distance 1 mm and the gap between the plates is filled with a fluid. If the force required per unit area to move one plate with a velocity of 1 mm/s relative to another plate is 0.001 N/m?, then the dynamic viscosity of the fluid in Pa.s is, 0.01 O 0.1 O 0.00001 0.001
A shaft 70-mm in diameter is being pushed at a speed of 400mm/s through a bearing sleeve 70.2-mm in diameter and 250mm long. The clearance is filled with oil with a kinematic viscosity of v = 0.005 ?2/? and SG=0.9. Find the frictional resistance exerted by the oil on the shaft in Newtons (N). And when the shaft is fixed axially and rotated inside the sleeve at 2000 rpm, determine the resisting torque exerted by the oil and the power required to rotate the shaft in kiloWatts (kW).
A piston with a diameter of 0.8 m and width of L=0.6 m rotates with 6 rad/s inside a cylinder that has a diameter of 1 m that filled with oil that has a viscosity of -3 8x10 N.s/m What is the shear force that acts on the circumference of the piston (N)? Assume the variation in velocity of the oil is linear. piston L Oil 0.8 m 1 m
The distance between two horizontal plates is 16mm and filled with oil of viscosity 1.75 x 10-3Poise. Calculate shear stress if upper plate is moved with velocity 3.5m/s relative to lower plate. Take specific gravity of the oil as 0.8.
Prob. 3: Two horizontal plates are placed 11.5 mm apart, the space between them being filled with oil of viscosity of 14 poise. Calculate the shear stress the upper plate moved with a velocity of 3.5 m/s. as pli the oil if
Determine the Universal Saybolt Viscosity of water at t-3s. Convert the answer to Poise,