A rectangular area 900 m long and 400 m wide is required to be irrigated. The soil to be irrigated is ferrasol and is perfectly level without slopes. The 163 mm (internal diameter of 160.5 mm) front displacement machine will be fed by a 200 mm diameter galvanized steel conductive pipe through the use of hydrants and a 160 mm (internal diameter of 138 mm) polyethylene hose. mm). This pipe has a length of 1000 m from the pumping station. Determine the flow rate and pressure needed at the pumping station if: ● ● ● ● ● ● ● The operation of the machine will be one-way irrigation and empty return and it moves at a maximum speed of 2.33 m/min. The water requirement of the crop is 5 mm/day and available time of irrigation per day is 16h. The net irrigation depth is 250 m3/ha. The wet width of the irrigation emitters is 10 m. The hydrants are placed every 300 m, with the first one placed 150 m from the beginning of the plot (see diagram). The hose that connects the conductive pipe to the machine has a length of 165 m. Application efficiency is 85%

A rectangular area 900 m long and 400 m wide is required to be irrigated. The soil to be irrigated is ferrasol and is perfectly level without slopes. The 163 mm (internal diameter of 160.5 mm) front displacement machine will be fed by a 200 mm diameter galvanized steel conductive pipe through the use of hydrants and a 160 mm (internal diameter of 138 mm) polyethylene hose. mm). This pipe has a length of 1000 m from the pumping station. Determine the flow rate and pressure needed at the pumping station if: ● ● ● ● ● ● ● The operation of the machine will be one-way irrigation and empty return and it moves at a maximum speed of 2.33 m/min. The water requirement of the crop is 5 mm/day and available time of irrigation per day is 16h. The net irrigation depth is 250 m3/ha. The wet width of the irrigation emitters is 10 m. The hydrants are placed every 300 m, with the first one placed 150 m from the beginning of the plot (see diagram). The hose that connects the conductive pipe to the machine has a length of 165 m. Application efficiency is 85%

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

9:46 M回 O NI l l 96%l IMG 20220311_093841.jpg From a reservoir A whose surface elevation is 225 m, water is pumped through 1200 m. of 300 mmø pipes across a valley to a second reservoir B whose level is at elev. 240 m. During pumping, the pressure is 550 kPa at a point on the pipe midway of its length at C and at elevation 195 m. f a pump is installed near the outlet of the reservoir A and assuming f= 0.02. EL 240 El. 225 600 mm 300 mme 300mm 600m EL 195 O Compute the discharge flowing in the pipeline. Compute the head added due to the presence of the pump. O Compute the horsepower exerted by the pump.
A cast-iron pipe transports water from a reservoir A and discharge it into air through a rotary valve at alocation 100 m below the water surface elevation at the reservoir.a) Draw the HGL and the EGLb) Determine the discharge if the temperature of the water is 10°C. Consider minor losses.
H.W.3/ A rectangular channel 10 m wide carries 15 cumecs. If the energy dissipated in the hydraulic jump is channel is 4.17 m, compute the basin type for dissipation. KH n T na WASIII di Ler ine wOIr i5 S.n.. Lype. rinu ne iengtn of ----.
What is the required pump power (Pa) for the system below? The source reservoir is on the right side of the figure The outflow is released as a water jet to the atmosphere (on the left) Discharge rate is 0.11 m3/s Pipe total length is 180 m Pipe diameter is 0.2 m Friction factor (f) is 0.01 Minor losses are negligibleCHOOSE ONE: 25 KiloWatt 169 KiloWatt 269 KiloWatt 112 KiloWatt
A closed tank contains liquified butane gas whose specific gravity is 0.60. The tank pressure is 1.7 Mpa gage which is also the equilibrium vapor pressure of butane at the pumping temperature. Suction lines losses is 1.5m of gas and the static elevation gain is 4m. What is the NET POSITIVE SUCTION HEAD AVAILABLE?(NPSHa)
A Pump The oil tanks have a diameter of D = 12m. The initial depth of the oil in tank A is 20m, and in tank B the depth is 1 m. The pump delivers a constant head of 60 m. The connecting pipe has a diameter of b = 0.2m, and the head loss due to friction in the pipe is hyL = 8- Find the time required to fill tank B to 14m depth. (neglect minor losses)
The settling basin for a type-1 suspension is to operate at an overfow rate of 0.76 m3/m2 ·h. The fow rate through the plant is 24,000m3/day. Determine the dimensions for a long rectangular basin,using a length to width ratio of 4:1. Depth should not exceed 4 m.Use more than one tank. Determine the detention time in the tankand the horizontal velocity.
Q3:A water treatment plant is to process 30000 m3/d. the rapid mixing tank of 2m depth will blend 35 mg/l of alum with flow and is to have a detention time of 2 min. the tank is to have a square cross section with vertical baffles and a flat blade impeller. determine the following: a) Quantity (Kilograms per day) of alum added. b) Dimensions of the tank.
A conduit is carrying oil ( S = 0.75 ) and its absolute viscosity is 0.25 kg / m-s. If the flow rate is 0.45 cu.m/s Determine the following • The entrance length • The length of the inviscid cone • The length of the profile development given the following situations 1. Circular pipe 800mm 2. rectangular pipe (Width = 800mm, Depth 1200mm)
Question 1: For the setup shown in the figure: H = 20 m f = 0.0012 f = 0.0012 D = 250 mm D = 80 mm L = 50 m L = 50 m f = 0.001 D₁ = 150 mm L = 100 m A. Calculate Q in the 150 mm-diameter pipe B. If the NPSHR of the pump is 3 m. Is it feasible to use the pump? You can use: Patm-101 kN/m², and Pvapor = 3.17 kN/m² H₂ = 10 m Pump Q f = 0.0012 D=80 mm L = 50 m Q₁ = 0.2
Three pipes of 400 mm, 300 mm and 200 mm diameters have lengths of 400 m, 300m, and 200 m respectively. They are connected in series to make a compound pipe. The endsof this compound pipe are connected with two tanks whose difference of water levels is 16 m. If co-efficient of friction for these pipes is same and equal to 0.005, determine the dischargethrough the compound pipe neglecting first the minor losses and then including them. faaaasttt
A 90 mm diameter shaft rotates at 1200 rpm in a 100 mm long journal bearing of 90.5 mm internal diameter. The annular space in the bearing is filled with oil having a dynamic viscosity of 0.12 Pa.s. Estimate the power dissipated.