n = Xe()r-------Equation 1where X = 1.7419 and (E/R) = -0.018 are constants for a given fluid. You are required to carry out appropriate calculations on the effectof changes in temperature given in table A by using equation 1 for Ethanol on the viscosity of a fluid.Table ANOTemperatureviscocity nT°CcP10320305406.50760870In addition to this, calculate other constraints such as the variety of shear stress (T) and force due to fluid viscosity, when the two layersof different compressible Newtonian fluids are contained between two flat plates separated by a distance of 0.05m and fluid movingwith the velocity of 2m/s in the horizontal direction. Assume the shear area between the fluid layers is 0.5m².To do this you required to explain, with examples, the effects of temperature and shear forces on Newtonian and non-Newtonian fluid.Also, explain the operation and constraints of different viscometers that quantify viscosity in fluids.2.

According to the given question, the velocity varies with temperature. But in actual practice, it…

n = Xe)r -Equation 1 vhere X = 1.7419 and (E/R) = -0.018 are constants for a given fluid. You are required to carry out appropriate calculations on the effec f changes in temperature given in table A by using equation 1 for Ethanol on the viscosity of a fluid. Cable A NO Temperature viscocity ŋ T°C cP 10 3 20 30 40 6 50 7 60 8 70 n addition to this, calculate other constraints such as the variety of shear stress (T) and force due to fluid viscosity, when the two layers f different compressible Newtonian fluids are contained between two flat plates separated by a distance of 0.05m and fluid moving vith the velocity of 2m/s in the horizontal direction. Assume the shear area between the fluid layers is 0.5m². 2.

n = Xe)r -Equation 1 vhere X = 1.7419 and (E/R) = -0.018 are constants for a given fluid. You are required to carry out appropriate calculations on the effec f changes in temperature given in table A by using equation 1 for Ethanol on the viscosity of a fluid. Cable A NO Temperature viscocity ŋ T°C cP 10 3 20 30 40 6 50 7 60 8 70 n addition to this, calculate other constraints such as the variety of shear stress (T) and force due to fluid viscosity, when the two layers f different compressible Newtonian fluids are contained between two flat plates separated by a distance of 0.05m and fluid moving vith the velocity of 2m/s in the horizontal direction. Assume the shear area between the fluid layers is 0.5m². 2.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In the figure given, fluid 2 is carbon tetrachloride and fluid 1 is benzene. If patm = 101.5 kPa, determine the absolute pressure at point A. fluid 1 A T 12 cm Patm fluid 2 35 cm ] LIVE 10 nexxt Reimagine Education. www.dlsl.edu.ph
The Table below shows the following data for a fluid to be constant temperature: du/dy (rad*s-1) 0,2 0,4 0,6 0,8 (N*m-2) 1,0 1,9 3,1 4,0 (a) Determine the behavior of the fluid and its viscosity. (b) Explain why the viscosity of a liquid decreases while the viscosity of a gas increases with increasing temperature.
A flat-bottomed raft is traveling across a shallow lake at 6 ms-¹. The lake is 10 cm deep. If the raft has a surface area of 3 m² and the lake is full of water with viscosity of 0.001 Pa s, determine the force required to maintain the raft's speed. [0.18 N]
The variation of the dynamic viscosity of water with absolute temperature is given as Using these tabulated data, develop a relation for viscosity in the form of ? = ? (T ) = A + BT + CT2 + DT3 + ET4. Using the relation developed, predict the dynamic viscosity of water at 50°C at which the reported value is 5.468 × 10−4 Pa⋅s. Compare your result with the results of Andrade’s equation, which is given in the form of ? = D⋅eB/T, where D and B are constants whose values are to be determined using the viscosity data given.
A steel ball with the density of 6229 kg/m and the radius of 0,65 cm was dropped into the oil whose viscosity was to be measured as isseen in the figure. When the ball attains a constant velocity, the distance that the ball travelled was measured as 99 cm within the time interval of 4,7 sec. Before the experiment, the mass of the 100 ml-oil was measured as 2,1 gr. According to the data given above, find; a) the density of the oil (in kg/m ). (Please do not use any decimal digit.) b) the speed of the steel ball after the ball attains a constant velocity (in m/s). (Please use 4 decimal digits.) c) the dynamic viscosity of the oil (in Pa.s) (Please use 3 decimal digits.) d) the flow Reynolds number. (Please use 4 decimal digits.) Please solve this question step by step to reach correct answers. correct answers: a) 21 b) 0,2106 c) 2,715 d) 0,0212
It is desired to determine the surface tension of a particular fluid using a capillary-riseexperiment. Kienth used a 0.5 mm glass tube and found that the height of the liquidmeasured 30 mm with a contact angle of 30°. Kienth then performed viscosity measurements using an Ostwald viscometer. He found that the fluid takes 1.5 times slowerto flow through the viscometer relative to water with a density of 1000 kg/m? and aviscosity of 1.0 cP. It is previously known that the viscosity of the fluid is 1.35 cP. Whatis the surface tension of the liquid?
A steel ball with the density of 6324 kg/m and the radius of 0,48 cm was dropped into the oil whose viscosity was to be measured as is seen in the figure. When the ball attains a constant velocity, the distance that the ball travelled was measured as 97 cm within the time interval of 4 sec. Before the experiment, the mass of the 100 ml-oil was measured as 2,8 gr. According to the data given above, find; a) the density of the oil (in kg/m). (Please do not use any decimal digit.) Yanıt:
A piston with a diameter of 0.8 m and width of L-0.2 m rotatęs with 6 rad/s inside a cylinder that has a diameter of 1m that filled with oil that has a viscosity of 8x10 N.s/m 2.00 What is the shear force that acts on the circumference of the piston (N)? ion Assume the variation in velocity of the oil is linear. piston Oil 0.8 m 1 m
The viscosity of crude oil under conditions of standard temperature and pressure is 7.13(10^-3) N · s/m^2. The viscosity of crude oil in U.S. Customary units (lb · s/ft^2) is?
Determine the dynamic viscosity (Pa-sec) and kinematic viscosi ty (m2/s) of vater with a specific weight of 9.81 kN/m3, if a Falling Sphere Viscosimeter test is conducted using an alumi num sphere that has a diameter of 10 mm and a specific weight of 28.06 kN/m3. The theoretical terminal velocity of the sphere is 0.650 m/s www.
In falling ball viscometer experiment, the viscometer with a calibration factor K=0.3 is used to measure the viscosity of oil with density p3D 0.8 gr/cm and the density of Tantalum ball is 16.6 gr/cm, if the ball is observed to fall 250 mm in time 50.3 sec. What is the viscosity of the oil (in cp)?
For liquid viscosity measurement, it is desired to create a viscometer consisting of two 30 cm long concentric cylinders. The diameter of the inner cylinder is 20 cm and the diameter of the outer cylinder is 20.2 cm. Since a torque of 0.13 N cinsm is required to rotate the inner cylinder with an angular velocity of 40 rad / s, what will be the viscosity of the fluid in the viscometer in Pa⋅s? Take the value of as 3.