The gear and attached V-belt pulley are turning counterclockwise and are subjected to the tooth load of 1600 N and the 800-N and 450-N tensions in the V-belt. Represent the action of these three forces by a resultant force R at O and a couple of magnitude M. Is the unit slowing down or speeding up? 15° 280 mm 150 mm 450 N 30° 800 N 15° 20 /1600 N

The gear and attached V-belt pulley are turning counterclockwise and are subjected to the tooth load of 1600 N and the 800-N and 450-N tensions in the V-belt. Represent the action of these three forces by a resultant force R at O and a couple of magnitude M. Is the unit slowing down or speeding up? 15° 280 mm 150 mm 450 N 30° 800 N 15° 20 /1600 N

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.60P: The force P applied to the brake handle enables the band brake to reduce the angular speed of a...

See similar textbooks

Similar questions

The pinion (gear 2 on shaft a) rotates at 695 rev/min clockwise and transmits 1497 W through the idler pair (gears 3 and 4 on shaft b) to the output gear (gear 5 on shaft c). Gears 2 and 3 have a module of 3 mm, and gears 4 and 5 have a module of 2 mm. Pressure angles are all 20 degrees. Solve for the magnitude of the force that shaft b must apply to gears 3 and 4 to maintain static equilibrium in the figure shown here. Co 18T- 327 X 18T 5 -48T
The pinion (gear 2 on shaft a) rotates at 635 rev/min clockwise and transmits 1305 W through the idler pair (gears 3 and 4 on shaft b) to the output gear (gear 5 on shaft c). Gears 2 and 3 have a module of 2 mm, and gears 4 and 5 have a module of 3 mm. Pressure angles are all 20 degrees. Solve for the magnitude of the force that shaft b must apply to gears 3 and 4 to maintain static equilibrium in the figure shown here. The figure is not to scale. Please give your answer in units of newtons. geard 615 verimin m₂ = M₁ = 2mm 187 327 187 487 MG M₁ = ₂ = 3mm 0=20° I solved it and дог 692.60 Х សុំ But fr is not correct
The pinion (gear 2 on shaft a) rotates at 635 rev/min clockwise and transmits 1305 W through the idler pair (gears 3 and 4 on shaft b) to the output gear (gear 5 on shaft c). Gears 2 and 3 have a module of 2 mm, and gears 4 and 5 have a module of 3 mm. Pressure angles are all 20 degrees. Solve for the magnitude of the force that shaft b must apply to gears 3 and 4 to maintain static equilibrium in the figure shown here. The figure is not to scale. 187 327 487
Both the magnitude and the direction of the force on a crankshaft change as the crankshaft rotates. Find the magnitude of the torque on the crankshaft using the position and data shown in the figure, where F = 1100 lb. ft-lb 60° F 0.16 ft --L-------
The diameter of two pulleys are (0.3m)and (0.2m), center distance (1m).if we use open belt drive. Determine: 1- the length of V- belt (2ß = 60°). 2- the contact angle between belt and smaller pulley. 3- the horse power, if the smaller pulley turn with speed (400r.p.m) and the tension force in tight side (T1=90ON), coefficient of friction u=0.3 4- the speed of large pulley.
Pulley A delivers a steady torque of 1100 lb-in. To a pump through its shaft at C. The tension in the lower side of the belt is 165 lb. The driving motor weighs 200 lb and rotates clockwise. Determine the bearing reaction force at O. A 9" B 30° 37 8" 150 lb - 5"-- 5"-
For the same question, the Driving force (pressing force) of the Nut will be measured with the Torque wrench. While tightening the nut, the contact surface rubs against the fixed surfaces. Accordingly, how much MOMENT do we need to read from the Torque wrench in order to create a force of Fçak=1101 kgf? (Given: Screw pitch M30, Root diameter d1=25.8 mm) Outer diameter of the friction surface under the nut D42 mmFriction coefficient μ=0.6
The operation of the fuel pump for an automobile depends on the reciprocating action of the rocker arm ABC, which is pinned at B and is spring loaded at A and D. The smooth cam C is in the position shown. The vertical force acting on the rocker arm at A is F₁60 N, and at C it is Fo 155 N (Eigure 1) Figure 50 mm Figure 10 mm 50 mm The operation of the fuel pump for an automobile depends on the reciprocating action of the rocker arm ABC, which is pinned at B and is spring loaded at A and D. The smooth cam C is in the position shown. The vertical force acting on the rocker arm at A is F =60 N. and at C it is Fe=155 N. (Figure 1) 20 mm- 10 mm 1 of 1 mm. 1 of 1 Part A Z Determine the and y components of the reaction force on the rocker arm ABC at the pin for equilib Express your answers using three significant figures separated by a comma. 195] ΑΣΦ | 11 | voc | B₁, B,= Submit Part B Part B Fo Submit Request Answer Determine the magnitude of the force along the spring DF for equilibrium.…
Q3 a. Define the following term 1. Lateral vehicle dynamics 2. oversteers 3. steering wheel shimmy 4.d'Alembert Force Q3 b When deriving the force acting on the wheel to determine the maximum grade we can E without wheel slippage (traction limited gradeability) then Write the equation that relate total mass of the vehicle in case of a Front wheel duiveWD ), on Rear wheel Drive (RWD in case of All wheel drive (4WD) power train ? s
4:48 68 O E B18 Statics_Moment.. o 240 N 2. A prybar is used to remove a nail as 15° shown. Determine 350 mm the moment of the 240 N force about the point o of 65° contact between the prybar and the small support block. 30 mm PROBLEMS 240cos10=236.35 N Mo=? 240 N 15° 65 240sin 10=41.68 N 350 mm M=236.35(0.35) +41.68(0.03)=83.97 N -m 65 (clockwise direction) 30 mm PROBLEMS 900 mm 700 mm 3. An experimental device imparts a force of magnitude F = 225 N to the front edge of the rim at A to simulate the F 300 mm effect of a slam dunk. Determine the moments of the force F about point O and about point B. Finally, locate, 3050 mm
The force P applied to the brake handle enables the band brake to reduce the angular speed of a rotating drum. If the tensile strength of the band is 3800 lb, find the maximum safe value of P and the corresponding braking torque acting on the drum. Assume that the drum is rotating clockwise.
The turning-moment diagram for an engine consists of two isosceles triangles each with a height equivalent to a torque of 16kNm. The bases of the triangles lie between ? = 0 ? and ? = 180? , and ? = 180? and ? = 360? Sketch the turning-moment diagram and add the mean torque line. If the engine is to rotate with a mean speed of 130 rpm, calculate the following: the power developed the mass of the flywheel having a radius of gyration 1.1m to restrict the fluctuation of speed to +1.5% of the mean speed. Demonstrate which would be most effective to reduce the fluctuation of speed, a change in diameter of or a change in mass of the flywheel.