Problem 6. The A-36 steel pipe has an outer radius of20 mm and an inner radius of 15 mm. If it fits snuglybetween the fixed walls before it is loaded, determinethe reaction at the walls when it is subjected to theload shown. Also find the average normal stress in eachsegment (state clearly whether the stress is in tensionor compression), the longitudinal displacement of Bafter deformation, and the lateral strains in eachsegment (Hint: use Poisson's ratio).300 mmB★8 kN8 kN- 700 mmC

Given: The outer radius of pipe ro=20 mm=0.02 m The inner radius of pipe ri=15 mm=0.015 m Distance…

Problem 6. The A-36 steel pipe has an outer radius of 20 mm and an inner radius of 15 mm. If it fits snugly between the fixed walls before it is loaded, determine the reaction at the walls when it is subjected to the

Problem 6. The A-36 steel pipe has an outer radius of 20 mm and an inner radius of 15 mm. If it fits snugly between the fixed walls before it is loaded, determine the reaction at the walls when it is subjected to the

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter1: Tension, Compression, And Shear

Section: Chapter Questions

Problem 1.4.12P: Solve the preceding problem if the mass of the tailgate is MT— 11 kg and that of the crate is hic—...

See similar textbooks

Related questions

Q: 5 If the tension in the gantry-crane hoisting cable is T 14 kN, determine the unit vector n in the…

A: According to the question T=14kN we need to find Unit vector in the direction of the AB Tension…

Q: Air at 30°C Dry-bulb temperature, 40% RH enters a heating chamber at the rate of 500 cmh (cu.m/hr).…

Q: In the figure shown below, the deflection of mercury is initially 208 mm. If the pressure at A is…

A: Given:Initial deflection of mercury, hHg=208 mm=0.208 mPressure at A is increased by =34 kPa=34*103…

Q: 1. For the linkage system show, Link 1 moves along the vertical direction via a linear motor. Link 2…

A: Dear Students Answer is given in the below attachment

Q: In each of Problems 9 through 16: a. Find the solution of the given initial value problem in…

A: Given the equation and boundary condition. Required: Solution of equation and its graph.

Q: If the specific volume of a certain gas is 0.8101 m3/kg, what is its specific weight in N/m3.…

Q: Until recently many of the regional airlines used power-producing aircraft for their shorter routes…

A: To determine: The number of commuter airlines switched to thrust-producing aircraft for these…

Q: 4-109. Replace the force and couple moment system acting on the beam by an equivalent resultant…

Q: An insulated tank (Tank A) of 0.6 m3 volume is connected to another insulated tank (Tank B) of 0.3…

A: Given that: Volume of tank A VA = 0.6 m3 Volume of tank A VB = 0.3 m3 Initially tank A contains…

Q: A cube of side (a) and mass (M) is initially sitting fully submerged at the bottom of a container…

A: The cube has a velocity U The fluid has a viscosity v The density of the fluid is p. The side of the…

Q: An air conditioner cools humid air Temperature 1 =25 celcius Temperature 2 = 10 celcius…

A: Given: An air conditioner cools humid air Temperature 1 =25 Celsius Temperature 2 = 10 Celsius…

Q: COMPUTE THE CAPILLARY DEPRESSION OF MERCURY AT 68^0 F TO BE EXPECTED IN A 0.05 IN θ TUBE

A: To find: The capillary depression. Given: The temperature of the mercury is T=68°F. The diameter of…

Q: 8) Find the centre of mass (centroid) for the following object: Note: use the following for a…

A: Draw the diagram of the object with x-y coordinate axis. The whole diagram is divided into 3 parts.…

Q: Compare the laminar flame speeds of Methanol combustion with air with =1.2 for the following two…

A: Laminar flame speed is a measure of the speed at which a flame propagates through a homogeneous…

Q: A machine of mass 112.7 kg is mounted on four parallel springs each of stiffness 3.2 x 105 N/m. When…

Q: Problem Statement Based on Problem 4-32 from the textbook. Determine the magnitude and coordinate…

A: Given data F = 45i+65j+30k Find the magnitude and direction angle of resultant moment about point A…

Q: Find the magnitudes of the forces in pins B and D. A Answers: B = i D= i A 570 N B N BD 790 N C

A: Given : To find : magnitude of the forces in pins B and D

Q: B by resolving the force into horizontal and vertical components. Answer Fig. P3.1 and P3.2 A 16 N…

A: To find moment about point B

Q: A gear has 44 teeth of the 20°, full-depth, involute form and a diametral pitch of 12. Compute the…

A: The helix angle of a gear is the angle between the gear's axis and the direction of the helix formed…

Q: Solve question 2 based on the answer of question 1. You have a natural gas furnace in your home…

A: The use of the natural gas furnace for heating in the home is 78500 ft3. The use of oil is for…

Q: Find the resultant of the three forces on the beam and the location of the resultant from A. 10 KN…

Q: 4. For the subsonic axial-flow air expander specified, calculate the stagnation and static pressures…

Q: Q2 The railway wheel exerts a force on the rail and through the wooden beam, and the gravel can be…

Q: In the First project: you have been asked to perform tensile testing for four different materials…

Q: In (Figure 1), set F= 300 N Figure 60 X F₁ = 500 N Determine the magnitude of the resultant force…

A: Given Data- A force system given we have to find resultant and direction of it

Q: What must be the velocity of flow of water from a 2-in- diameter nozzle to exert a force of 300 lb…

A: Given Data- D=2in=0.0508m Force F=300lb=1334.47N We have to find velocity

Q: Which of the five groups of the primary refrigerants has the adverse impact on the environment?…

A: Primary Refrigerants: The primary refrigerants are the fluids that are directly used as a working…

Q: Which is the correct moment of force about this problem? If this solution below is the correct one,…

A: Explanation: In this problem both solutions are correct but in previous solution ( where x = 0.3909…

Q: A 4-cm-OD, 3-cm-ID, circular shaft supports a 200 N load and is supported at two points, which are…

Q: A cube 2.2 feet on an edge has its lower half of s.g. = 11.8 and upper half of s.g. = 11 . It…

A: Given

Q: For ??= - 50 MPa, ??= - 30 MPa, and ?? =30 MPa, calculate the normal strains if E =50,000 MPa and ?=…

Q: The components of a two-dimensional velocity field are u = 4+ y³ and v = 16. The equation for a…

Q: 1800 lbf 300 lbf/in 10 in 30 in- 3 in 3 in Cross section (enlarged) Determine the maximum tensile…

Q: Change multiview drawings to isometric

A: The required isometric views of the given orthographic views are drawn below.

Q: The two-dimensional flow of a nonviscous, incompressible fluid in the vicinity of the 90° corner is…

Q: Problem Statement Based on Problem 4-61 from the textbook. Determine the magnitude of the moment of…

Q: A slab of meat wc is 25.4 mm thick originally at a uniform temperature of 10C is to be cooked from…

A: Write the given data. Slab thickness, x=25.4 mm=0.0254 mSlab temperature at top, Tslab=10 °CSlab…

Q: Determine the moments of inertia of the shaded area about the x- and y-axes. Answers: 04 94

Q: Column AB is made from high strength pre-cast concrete and reinforced with four in. diameter A-36…

A: Given the material properties and allowable stresses. Required: Maximum load P.

Q: An eight-inch-long steel has a cross section area of 0.25 in2. After a load of 5000 lbs has been…

Q: Assume the temperature of the exhaust in an exhaust pipe can be approximated by T = To (1 + ae-bx)…

A: To find: The time rate of change of temperature of the fluid particles at x=0, x=4 when t=0. Given:…

Q: The following two step bar is subjected to an axial load P. The cross-section of the bar is…

A: Young's modulus of elasticity is E=88 GPa. The thickness is t=4.9 mm The length of each bar is L=0.5…

Q: system consist of two vessels A and B with a connecting valve. the vessel A contains 0.425 m3 of…

Q: The A913 steel rod is subjected to the loading shown with P = 14 kN. (Figure 1) The cross-sectional…

Q: Select the most appropiate free body diagram

Q: The smooth surface of the vertical cam is defined in part by the curve r = (0.2 cos 0+0.3) m. 41…

A: Write the given data. Expression for curve, r=0.2cosθ+0.3Angular velocity, θ˙=4 rad/sAngular…

Q: Determine the y-coordinate of the centroid of the area under the sine curve shown.

A: According to the given data we need to find centroid co-ordinates of the shaded area

Q: Hot water at a constant volumetric flow rate of Fh and temperature Th(t) is mixed with cold water…

A: Given: Hot water at a constant volumetric flow rate of Fh and temperature Th(t) cold water at a…

Q: Determine the downward vertical door weight (acting in door middle in negative z direction) that…

A: According to given data and figure We need to find Weight of the Door

Q: Calculate the moment of inertia of the shaded area about the x-axis. JA

Concept explainers

Forming and Shaping

Metal forming is a category of metalworking process through which the material can be given the desired shape and size by subjecting it to plastic deformation, where the component undergoes bulk deformation process upon application of loads. Unlike the shearing and machining process, the material does not undergo up to a failure point as indicated in the stress-strain curve. Hence, the stresses induced during the forming process are greater than yield strength but less than the failure strength of the material. The process does not lead to the loss of material, so it can be said to be an economical process. During forming, the material is subjected to tensile forces, compressive forces, bending, and shearing loading conditions. The material should possess the property of ductility to undergo the forming process.

Question

Problem 6. The A-36 steel pipe has an outer radius of
20 mm and an inner radius of 15 mm. If it fits snugly
between the fixed walls before it is loaded, determine
the reaction at the walls when it is subjected to the
load shown. Also find the average normal stress in each
segment (state clearly whether the stress is in tension
or compression), the longitudinal displacement of B
after deformation, and the lateral strains in each
segment (Hint: use Poisson's ratio).
300 mm
B
★
8 kN
8 kN
- 700 mm
C

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Follow-up Questions

Read through expert solutions to related follow-up questions below.

Follow-up Question

The question is not answer fully. Please answer the second part of the question statement.

Solution

by Bartleby Expert

SEE SOLUTION

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A pipe carrying steam at 3.0 MPa has an outside diameter of 450 mm and a wall thickness of 10 mm. A gasket is inserted between the flange at one end of the pipe and a flat plate used to cap the end. How many 25 mm diameter bolts must be used to hold the cap on if the allowable stress in the bolts is 90 MPa of which 50 MPa is the initial stress? What circumferential stress is developed in the pipe?
A pipe carrying steam at 3.5 MPa has an outside diameter of 450 mm and a wall thickness of 10 mm. A gasket is inserted between the flange at one end of the pipe and a flat plate used to cap the end. How many 47-mm-diameter bolts must be used to hold the cap on if the allowable stress in the bolts is 80 MPa, of which 55 MPa is the initial stress?
2. The bar AC is supported by a pin at A and a cable that runs from B to E around the frictionless pully at D. If the allowable tensile stress oallow = 5.2 ksi for the cable, determine the required minimum diameter (inch) of the cable. The cylinder (connected at C) weighs 890 lb. Neglect weight and thickness of the bar AC. D 4 3 A C 5 ft 5 ft -4 ft 890 lb
The uniform 300-1b bar AB carries a 500-lb vertical force at A. The bar is supported by a pin at B and the 0.5-in. diameter cable CD. Find the stress in the cable. DRAW THE FREE BODY DIAGRAM.
Determine the stress components acting on the inclined plane AB in if: normal stressy = 61MPa shear stressxy = -25 MPa solve the problem using the method of equilibrium. Find normal stress x' =? find shear stress x'y' =? I have a question regarding the answer you provided. The shear stress is -25MPa. You used a positive 25MPa in the solution. Why is that?
3- The modulus of elasticity, and the modulus of resilience. 4- The final or fracture strain of a steel specimen, if you know that the final length of specimen after testing is 58.5mm. 5- The true stress and strain for ultimate point. Q3: The yoke-and-rod connection is subjected to a tensile force of 15 kN. Determine the average normal stress in each rod and the average shear stress in the pin A between the members. Finally, find the shear strain in pin A. Take G steel= 75GPA 40 mm 15 kN. 30 mm 30 mm 15 kN 04: In figure as shown below, assume that a 35mm diameter rivet joint the plates which are each 150mm wide. (a) if the allowable stresses 200 MPa for bearing in the plate material and 120 MPa for shearing of the rivet, determine the minimum thickness of each plate. (b)Under the conditions specified in part (a) what is the largest average stress in the plate. 35mm
Q1/ The aluminum and bronze cylinders are centered and secured between two rigid end-plates by tightening the two steel bolts. There is no axial load in the assembly at a temperature of 50°F. Find the stress in the steel bolts when the temperature is increased to 200°F. Use the following data: 1.0 in. -3 in--4 in. F1.0 in. A (in.?) a (J°F) E (psi) Aluminum cylinder 2.00 12.8 x 10-6 10 x 106 Bronze cylinder 3.00 10.5 x 10-6 12 x 10 Aluminum Bronze Each steel bolt 0.75 6.5 x 10-6 29 x 10 Q2/ The rigid bar ABCD is supported by a pin at B and restrained by identical steel bars at C and D, each of area 250 mm?. If the temperature is increased by 80°C, determine the force P that will cause the bar at C to be stress-free. Use E = 200 GPa and a=12.8*10PC 3 m 0.8 m 0.6 m Ce D P
7. Determine the stress developed in the Tensional Cord given that the cable's diameter is 0.6 inches and the bar weigh 6kips. Figure P-106 3 m 5 m 5 m E
The lap point is fastened with four 20-mm-diameter rivets. the working stresses are 110 MPa for rivets in shear and 180 MPa for plates in bearing. Find the maximum safe load P that can be applied to the joint. Assume that the load is equally distributed among the rivets
The cylindrical steel column has an outer diameter of 4 in. and inner diameter of 3.5 in. The column is separated from the concrete foundation by a square bearing plate. The working compressive stress is 26 000 psi for the column, and the working bearing stress is 1200 psi for concrete. Find the largest force P that can be applied to the column. Express your answer in Ib. 4 in. 3.5 in. 4/4 7 in.
The pressure vessel with 600-mm diameter and 20 mm wall thickness is under internal pressure p where p=300 bar. If the tank is made of A-36 Steel, determine the values that we expect to read in straingauges 1 and 2 shown in the figure. Also, determine the factor of safety for the tank based on Von-Misses and Tresca failure criteria.
The uniform 300-Ib bar AB carries a 500-lb vertical force at A. The bar is supported by a pin at B and the 0:5-in. diameter cable CD. Find the stress in the cable. 4 ft A 3 ft C 3 ft B 500 lb